Retevis FC9055A 2-bens USB-programmeringskabel, brugsanvisning

1. Introduktion

This manual provides instructions for the proper setup and use of the Retevis FC9055A 2-Pin USB Programming Cable. This cable is designed to facilitate the programming of compatible two-way radios, allowing users to customize settings, frequencies, and other parameters via a computer. The cable features a built-in FTDI chip for reliable performance and broad operating system compatibility.

2. Opsætning

2.1 Driverinstallation

The Retevis FC9055A programming cable is designed for ease of use with automatic driver installation on most modern operating systems. It is equipped with an FTDI chip for stable connectivity.

• Automatisk installation: When connected to a computer with an active internet connection, Windows (7/8/10/11), Linux, Mac OS X, and Android systems typically install the necessary drivers automatically.
• Manuel installation: If automatic installation does not occur (e.g., no internet connection, older operating systems like Windows XP, or specific system configurations), drivers may need to be installed manually. Refer to the FTDI website or the Retevis support page for the latest driver packages.

2.2 Tilslutning af kablet

1. Connect the USB Type-A end of the programming cable to an available USB port on your computer.
2. Connect the 2-pin K-head plug end of the programming cable to the accessory port of your compatible two-way radio. Ensure a secure connection.

3. Betjeningsvejledning

Once the cable is connected and drivers are installed, you can proceed with programming your radio using appropriate software.

1. Install Programming Software: Obtain and install the specific programming software for your radio model (e.g., CHIRP, Retevis programming software). This software is typically provided by the radio manufacturer or available from third-party sources.
2. Start software: Åbn programmeringssoftwaren på din computer.
3. Select COM Port: Within the software settings, identify and select the correct COM port assigned to the USB programming cable. This can usually be found in your computer's Device Manager (Windows) or system information (Mac/Linux).
4. Read Radio Data: Use the software's function to 'Read from Radio' to retrieve the current configuration of your device. This step is crucial for backing up existing settings before making changes.
5. Rediger indstillinger: Adjust frequencies, channels, squelch levels, and other programmable features as needed within the software interface.
6. Write to Radio: Once modifications are complete, use the software's 'Write to Radio' function to upload the new configuration to your device. Ensure the radio remains connected and powered on during this process.
7. Verificere: After writing, it is recommended to read the radio data again to confirm that the new settings have been successfully applied.

4. Kompatibilitet

The Retevis FC9055A 2-Pin USB Programming Cable is compatible with a wide range of two-way radios that utilize a K-head 2-pin accessory port. This includes, but is not limited to, the following models:

• Retevis: H-777, RT21, RT22, RT-5R, RT-5RV, H-777S, RT1, RT2, RT5, RT7, RT15, RT17, RT18, RT19, RT23, RT26, RT27, RT28, RT43, RT46, RT50, RT56, RT67, RT68, RT71, RT76, RT76P, RT80, RT81, RT85, RB26, RB17P, RB26, RB37.
• Baofeng: UV-5R, UV5RA, UV5RE, UV5REPlus, BF-888S, BF-777, BF-666S, BF-777S, BF-F8HP, BF-888S, 5RM.
• Kenwood KPG Series: KPG27D, KPG29D, KPG49, KPG70D, KPG74D, KPG82D.
• Kenwood TH Series: TH-D7, TH-D7AG, TH-D7E, TH-G71A, TH-G71E, TH-K2, TH-22, TH-25.
• Kenwood TK Series: TK-208/308, TK-240D/340D, TK-248/348, TK-250/350/353, TK-260/360, TK-2102/3102 Pro-Power, TK-2107/3107 Pro-Talk, TK2207, TK3207.
• Linton: LT-2288/3288/6288/5288/3188/2188/3260/2268/3268,/6288/6188/3288A.
• HYT: TC286, 386, 2685, 3865, 6685, TC 278, 378, 388, TC 2100, 2088.
• Andre: Samcom, Arcshell walkie talkies with compatible 2-pin K-head ports.

5. Fejlfinding

• Cable Not Recognized:
  • Sørg for, at kablet er korrekt tilsluttet til både computeren og radioen.
  • Verify that the drivers are correctly installed. Check your computer's Device Manager for any unknown devices or driver errors. If necessary, manually install the FTDI drivers.
  • Prøv en anden USB-port på din computer.
• Programming Software Not Detecting Cable/Radio:
  • Confirm that the correct COM port is selected within the programming software.
  • Ensure the radio is powered on and functioning correctly.
  • Close and reopen the programming software.
  • Genstart din computer.
• Error During Read/Write Operation:
  • Ensure the radio's battery is sufficiently charged.
  • Confirm that you are using the correct programming software version for your specific radio model.
  • Temporarily disable any antivirus or firewall software that might interfere with the communication.

6. Specifikationer

7. Garanti og support

Retevis tilbyder en 1 års garanti for accessories, including this programming cable, and offers a 30 dages returret without specific reason. Beyond the warranty period, maintenance services are available, with buyers responsible for associated costs.

For support or warranty claims, please contact Retevis customer service through Amazon. Responses are typically provided within 12 hours.