1. Produktet er slutview
The Good Earth Lighting LED security flood light is designed to provide enhanced safety and security for outdoor areas such as backyards and driveways. This fixture features a durable die-cast aluminum housing with a bronze finish and a shatter-resistant polycarbonate diffuser for even light distribution. It includes integrated 34-watt LED lamps that emit a bright white light, offering maximum illumination with an estimated lamp life of 50,000 hours. The design incorporates swivel joints for precise aiming of the light heads and a universal mounting plate for simplified installation.
Nøglefunktioner omfatter:
- Maximum Illumination: Integrated LEDs produce over 3300 lumens with low energy consumption (34 watts).
- Bevægelse aktiveret: Registrerer bevægelse op til 100 fod inden for et 240-graders område.
- Justerbare hoveder: Three light heads can be adjusted for precise aiming and broad light coverage.
- Nem installation: Universal mounting platform supports wall, eave, or surface box mounting.
- Lang L.amp Liv: Estimated 50,000 hours of lamp liv.
Figure 1.1: Good Earth Lighting Three-Head 2N1 LED Motion Security & Area Light (Bronze finish).
2. Sikkerhedsoplysninger
Læs og forstå alle instruktioner, før du påbegynder installationen. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer, der kan forårsage personskade eller materielle skader.
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
- ADVARSEL: Risk of fire. Use only on circuits rated for the fixture's wattage.
- Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
- Ground the fixture properly to avoid potential electrical shocks.
- Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe sikkerhedsrisici.
- Sørg for, at alle forbindelser er sikre og korrekt isolerede.
- Se ikke direkte ind i LED-lyskilden, når armaturet er tændt.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x LED Motion Security & Area Light Fixture with integrated LED lights
- 1 x Universal monteringsplade
- Monteringsudstyr (skruer, trådmøtrikker osv.)
- Pre-installed push-in wire connectors
- Instruktionsmanual (dette dokument)
4. Installation
This fixture is designed for direct wire installation and can be mounted on walls, eaves, or surface boxes. For detailed step-by-step installation instructions, please refer to the official Installation Manual PDF provided by Good Earth Lighting. A link to this document is available in the Warranty & Support section of this manual.
Key installation considerations:
- Ensure the mounting surface is sturdy enough to support the fixture.
- The universal mounting plate simplifies attachment to various electrical boxes.
- Proper wiring and grounding are essential for safe operation.
Figure 4.1: Packaging illustrating various mounting options (Wall, Eave, Box).
5. Opsætning og konfiguration
After installation, configure the light's settings using the controls located on the motion sensor unit.
Figure 5.1: Control panel with settings for Range, Time, and Light Mode.
5.1. Justering af lyshoveder
The three LED light heads are independently adjustable. Loosen the locking nuts on the swivel joints, position each head to direct light to your desired area, and then tighten the locking nuts securely.
5.2. Motion Sensor Settings (2N1 Functionality)
The control panel allows you to customize the motion sensor's behavior and light output:
- Rækkevidde: Adjusts the motion detection sensitivity and distance (e.g., 5 feet to 60 feet).
- Tid: Sets how long the light remains on after motion is detected (e.g., Test, 1 minute, 5 minutes, 10 minutes).
- Light Mode (2N1):
- Security Light (High Beam): Activates full brightness (3300 lumens) upon motion detection.
- Area Light (Low Beam): Provides continuous low-level illumination, then switches to high beam upon motion detection. Settings may include "Dusk To Dawn" for continuous low-level light from dusk till dawn, or timed options (e.g., 3 hours, 5 hours) for low-level light after dusk.
- OFF: Disables the light.
Refer to the detailed installation manual for specific instructions on setting each dial.
6. Betjening
Once installed and configured, the Good Earth Lighting 2N1 LED Motion Security & Area Light operates automatically based on your chosen settings.
- Bevægelsesdetektion: The integrated motion sensor will detect movement within its set range and angle (up to 100 ft, 240 degrees).
- Lys aktivering:
- In Security Light (High Beam) mode, the light will turn on at full brightness when motion is detected and remain on for the set time duration.
- In Area Light (Low Beam) mode, the light will provide continuous low-level illumination during the set period (e.g., Dusk To Dawn, 3 hours, 5 hours). Upon motion detection, it will switch to full brightness for the set time duration, then return to low-level illumination.
- Automatisk slukning: After the set time duration, if no further motion is detected, the light will turn off (in Security Light mode) or return to low-level illumination (in Area Light mode).
7. Vedligeholdelse
The Good Earth Lighting LED fixture is designed for long-term, low-maintenance operation. The integrated LEDs have an estimated life of 50,000 hours and are not user-replaceable.
- Rensning: Rengør armaturet regelmæssigt med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or polycarbonate diffuser.
- Inspektion: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure the mounting is secure.
- lysdioder: Do not attempt to replace the integrated LED lamps.
8. Fejlfinding
If your light fixture is not operating as expected, review følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power; faulty wiring; sensor blocked; incorrect settings. | Check circuit breaker/fuse. Verify wiring connections. Ensure sensor is clear of obstructions. Adjust "Dusk To Dawn" or "OFF" settings. |
| Lyset forbliver tændt konstant. | Continuous motion detected; "Test" mode active; "Dusk To Dawn" or timed Area Light mode active. | Ensure no constant motion in detection zone. Switch out of "Test" mode. Verify light mode setting. |
| Bevægelsessensor registrerer ikke. | Sensor range too low; sensor obstructed; incorrect mounting height. | Increase sensor range setting. Clear obstructions. Ensure fixture is mounted at recommended height. |
| Lyset flimrer eller dæmpes. | Løs ledningsforbindelse; strømsvingninger. | Check all electrical connections. Consult a qualified electrician if problem persists. |
For more comprehensive troubleshooting steps, please refer to the official Installation Manual PDF.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | God jordbelysning |
| Modelnummer | SE1095-BP2-02LF0-G |
| Produktdimensioner | 12 cm L x 9 cm B x 5.75 cm H |
| Varens vægt | 2.17 pund |
| Farve | Bronze |
| Materiale | Die Cast Housing, Polycarbonate Diffuser |
| Lyskildetype | Integreret LED |
| Wattage | 34 watt |
| Lysstyrke | 3300 lumen |
| Lamp Liv | 50,000 timer (estimeret) |
| Bevægelsessensor rækkevidde | Op til 100 fod |
| Bevægelsessensorvinkel | 240 grader |
| Installationstype | Direct Wire, Flush Mount (Wall, Eave, Surface Box) |
| Indendørs/Udendørs brug | Udendørs |
| Certificeringer | ETL Listed, EPA Energy Star Certified |
10. Garanti og support
10.1. Begrænset garanti
The Good Earth Lighting Three-Head 2N1 LED Motion Security & Area Light carries a 10 års begrænset garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official product documentation or contact Good Earth Lighting customer service.
10.2. Yderligere ressourcer
For detailed installation instructions, wiring diagrams, and advanced troubleshooting, please download the official Installation Manual (PDF):
Download installationsmanual (PDF)
10.3. Kundesupport
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Good Earth Lighting customer support. Contact information can typically be found on the product packaging or the official Good Earth Lighting webwebsted.
