Weiser SmartCode 10 Nøglefri Adgang Deadbolt Lås Brugermanual

Indledning

This manual provides comprehensive instructions for the installation, operation, programming, and maintenance of your Weiser SmartCode 10 Keyless Entry Deadbolt Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.

Figur 1: Ydre view of the Weiser SmartCode 10 Keyless Entry Deadbolt Lock in Polished Brass finish, showing the keypad and keyhole.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Udvendig tastatursamling
• Interior Assembly Unit
• Lås
• Slagplade
• Monteringsplade
• Adapterring
• 2 nøgler
• Skruer
• SmartKey-værktøj
• 4 AA batterier
• Installationsvejledning (denne manual)

Opsætning og installation

Før installation skal du sørge for, at din dør opfylder følgende specifikationer:

• Door thickness: 1-3/8" to 2" (35mm - 51mm)
• Cross bore hole diameter: 2-1/8" (54mm)
• Backset: 2-3/8" or 2-3/4" (60mm or 70mm)

Nødvendige værktøjer:

• Phillips hovedskruetrækker
• Målebånd
• Blyant

Installationstrin:

1. Forbered døren: If replacing an existing lock, remove it. Ensure the door frame is properly prepared for the strike plate.
2. Installer lås: Insert the latch into the door edge. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.
3. Installer udvendig samling: Route the cable from the exterior keypad assembly through the cross bore hole. Position the exterior assembly flush against the door.
4. Installer monteringsplade: Secure the mounting plate to the door using the provided screws, ensuring the cable passes through the plate.
5. Tilslut kabler: Tilslut kablet fra den udvendige enhed til den indvendige enhed.
6. Installer indvendig samling: Attach the interior assembly to the mounting plate. Ensure the turn piece shaft engages correctly with the latch mechanism. Secure with screws.
7. Installer batterier: Insert the 4 AA batteries into the battery pack of the interior assembly.
8. Udfør dørhåndtagningsprocessen: This step is crucial for the lock to learn the orientation of your door.
   • With the door open and unlocked, press the "Lock" button on the keypad.
   • The latch bolt should extend and retract. If it does not, repeat the process.

Figur 2: The Weiser SmartCode 10 deadbolt lock installed on a dark wooden door, showcasing its integration with existing door hardware.

Betjeningsvejledning

Programmering af brugerkoder:

The lock supports up to 16 user codes and one master code. The master code is used to add or delete user codes and should be kept confidential.

1. Set Master Code (First Time Only):
   • Åbn batteridækslet på den indvendige del.
   • Tryk én gang på knappen "Program".
   • Enter a new 4-8 digit master code on the keypad.
   • Tryk på knappen "Lås".
   • Re-enter the master code.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
2. Tilføj brugerkode:
   • Åbn batteridækslet.
   • Tryk én gang på knappen "Program".
   • Indtast masterkoden.
   • Tryk på knappen "Lås".
   • Indtast en ny brugerkode på 4-8 cifre.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
3. Slet brugerkode:
   • Åbn batteridækslet.
   • Press the "Program" button twice.
   • Indtast masterkoden.
   • Tryk på knappen "Lås".
   • Indtast den brugerkode, der skal slettes.
   • Press the "Lock" button. A successful deletion will be indicated by a green flash and a beep.

Låser døren:

• Fra ydersiden: Tryk på "Lås"-knappen på tastaturet. Rigellåsen vil trække sig ud.
• Fra interiøret: Rotate the turn piece to the vertical position.

Oplåsning af døren:

• Brug af tastatur: Enter a valid user code or master code. The deadbolt will retract.
• Brug af nøgle: Insert the key into the keyhole and turn.
• Fra interiøret: Rotate the turn piece to the horizontal position.

Figur 3: Indre view of the Weiser SmartCode 10 deadbolt lock, showing the battery compartment and turn piece.

SmartKey Re-keying Instructions

The SmartKey feature allows you to re-key your lock to a new key in seconds. This is useful if you want to match your lock to an existing key or if you lose a key.

1. Sæt din funktionsnøgle helt ind i cylinderen.
2. Drej nøglen 90 grader med uret.
3. Insert the SmartKey tool firmly into the SmartKey hole.
4. Remove the SmartKey tool.
5. Fjern din funktionsnøgle.
6. Sæt din nye nøgle helt ind i cylinderen.
7. Drej den nye nøgle 90 grader mod uret.
8. Rotate the new key 90 degrees clockwise again to ensure it functions correctly.

Figur 4: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Opretholdelse

• Udskiftning af batteri: When the batteries are low, the lock will emit a series of beeps and the keypad will flash red after locking/unlocking. Replace all four AA batteries promptly.
• Rensning: Clean the keypad and exterior finish with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, som kan beskadige overfladen.
• Smøring: Periodically lubricate the latch bolt and deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the key cylinder.

Fejlfinding

Specifikationer

• Model: 9GED17000-001
• Slutte: Poleret messing
• Materiale: Messing
• Dørtykkelse: 1-3/8" to 2" (35mm - 51mm)
• Krydsboring: 2-1/8" (54 mm)
• backset: Justerbar 60 mm eller 70 mm (2-3/8" eller 2-3/4")
• Brugerkoder: Op til 16 (4-8 cifre)
• Strømkilde: 4 AA alkaliske batterier (inkluderet)
• Særlige funktioner: Keyless Entry, Backlit Keypad, One-Touch Locking, SmartKey Re-key Technology, Auto-Lock
• Produktdimensioner: 9.4 x 13.72 x 25.4 cm
• Varens vægt: 1.69 kg

Garanti og support

This Weiser SmartCode 10 Keyless Entry Deadbolt Lock comes with a Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Weiser webwebsted eller kontakt kundeservice.

Fabrikant: Weiser

Webwebsted: www.weiserlock.com (Eksamplinket, det faktiske link kan variere)

Kundeservice: Refer to the Weiser webwebsted for kontaktoplysninger specifikt for din region.