Westek TE402WHB Indendørs Ugentlig Digital Bar Timer Brugsanvisning

1. Introduktion

Thank you for choosing the Westek TE402WHB Indoor Weekly Digital Bar Timer. This device is designed to provide automated control for various indoor electrical appliances such as lights, heaters, and fans. It features a large LCD display, dual outlets, and programmable settings for daily or weekly cycles, including a random mode for enhanced security. This manual provides detailed instructions for safe installation, programming, and operation.

2. Sikkerhedsoplysninger

• Kun indendørs brug: Denne timer er designet til indendørs brug på tørre steder. Må ikke udsættes for vand eller fugt.
• Elektrisk vurdering: Overskrid ikke den maksimale belastning på 8 Amps, 960 Watts resistive, 600W Tungsten. Overloading the timer can cause damage or fire.
• Jording: Ensure the timer is plugged into a properly grounded 120VAC, 60Hz outlet.
• Rensning: Disconnect from power before cleaning. Use a dry cloth; do not use liquid cleaners.
• Reparation: Forsøg ikke at skille timeren ad eller reparere den. Overlad al service til kvalificeret personale.

3. Produktet er slutview

The Westek TE402WHB timer features a clear LCD display and intuitive buttons for easy programming. It includes two side-mounted outlets for connecting appliances.

Figur 3.1: Front view of the Westek TE402WHB Digital Bar Timer, showing the LCD display and control buttons (SET, DOWN, ON/OFF, UP, RND, RESET).

Figur 3.2: Vinklet view of the timer, highlighting the LCD, buttons, and one of the two side outlets.

Figur 3.3: Side view of the timer, clearly showing the two electrical outlets.

3.1. komponenter

• LCD-skærm: Viser aktuel tid, dag, programstatus og indstillinger.
• SET -knap: Enters programming mode and confirms selections.
• NED -knap: Decreases values or moves backward through options.
• ON/OFF knap: Manually turns connected devices ON or OFF, or switches between modes.
• UP -knap: Increases values or moves forward through options.
• RND (Tilfældig) knap: Aktiverer eller deaktiverer den tilfældige TIL/FRA-funktion.
• Genstarts knap: Nulstiller alle indstillinger til fabriksindstillingerne. Brug en spids genstand (f.eks. en pen) til at trykke.
• Udsalgssteder: Two 3-prong outlets on the sides for connecting appliances.
• Batteri-sikkerhedskopi: Internal rechargeable battery retains settings during power outages.

4. Opsætning

4.1. Initial Power-Up and Reset

1. Plug the timer into a standard 120VAC, 60Hz wall outlet.
2. The LCD display will illuminate. If the display is blank or shows erratic characters, press the NULSTIL button using a small pointed object. This will clear all previous settings and ensure proper operation.

4.2. Indstilling af aktuel tid og dag

After resetting, or if the time is incorrect, follow these steps:

1. Tryk på SÆT button once. The hour digit will flash.
2. Brug UP or NED buttons to adjust the hour. Pay attention to AM/PM indicators.
3. Trykke SÆT again. The minute digit will flash.
4. Brug UP or NED knapper for at justere minutterne.
5. Trykke SÆT again. The day of the week will flash.
6. Brug UP or NED buttons to select the current day (MO, TU, WE, TH, FR, SA, SU).
7. Trykke SÆT one last time to confirm and exit time setting mode. The display will show the current time and day.

5. Betjeningsvejledning

5.1. Manuel TIL/FRA

To manually control the connected appliance:

• Tryk på ON/OFF button. Each press will cycle through:
• PÅ: The appliance will stay on continuously.
• OFF: The appliance will stay off continuously.
• BIL: The timer will operate according to the programmed settings.

5.2. Random Mode (RND)

The random mode can be used to simulate occupancy, turning connected devices ON and OFF at irregular intervals within a set period. This feature is useful for security when you are away from home.

• Tryk på RND button to activate or deactivate this mode.
• When activated, 'RND' will appear on the display. The timer will then turn devices ON and OFF randomly, overriding programmed settings.
• Trykke RND again to deactivate. The timer will return to its previous mode (ON, OFF, or AUTO).

5.3. Sommertid (DST)

Sådan justerer du for sommertid:

• Tryk og hold på ON/OFF button for 3 seconds. The display will show 'DST' and the time will advance by one hour.
• Gentag processen for at vende tilbage til standardtid.

6. Programmering

The timer allows for up to 20 ON/OFF programs. Each program can be set for specific days or groups of days.

6.1. Setting a Program

1. Tryk på SÆT button repeatedly until '1 ON' appears on the display. This indicates the first ON program.
2. Trykke SÆT. The hour digit will flash. Use UP or NED for at indstille den ønskede ON-time.
3. Trykke SÆT. The minute digit will flash. Use UP or NED for at indstille det ønskede ON-minut.
4. Trykke SÆT. The day(s) of the week will flash. Use UP or NED to select the desired day combination for this program. Options include:
• MO TU WE TH FR SA SU (Every day)
• MO TU WE TH FR (Weekdays)
• SA SU (Weekends)
• MO TU WE TH FR SA (Mon-Sat)
• MO VI FR
• TU TH SA
• MO TU VI
• TH FR SA
• Individual days (MO, TU, WE, etc.)
5. Trykke SÆT to confirm the ON time and day(s).
6. The display will now show '1 OFF'. Repeat steps 2-5 to set the desired OFF time and day(s) for the first program.
7. After setting '1 OFF', press SÆT to move to '2 ON' and continue programming additional ON/OFF cycles (up to 20).
8. To exit programming mode at any time, stop pressing buttons for approximately 10 seconds, or press the ON/OFF knap.

6.2. Adviewing programmer

Til review your programmed settings, repeatedly press the SÆT button. The display will cycle through all 20 ON/OFF programs. If a program is not set, it will show '--:--'.

6.3. Deleting a Program

To delete a specific program:

1. Tryk på SÆT button repeatedly until the desired program (e.g., '5 ON') is displayed.
2. Tryk på ON/OFF button. The display will show '--:--' for that program, indicating it has been cleared.
3. Repeat for the corresponding OFF program (e.g., '5 OFF').

7. Vedligeholdelse

7.1. Rensning

Disconnect the timer from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.

7.2. Batteribackup

The timer includes a rechargeable battery backup that maintains your programmed settings during a power outage. This battery charges automatically when the timer is plugged into an active outlet. No user maintenance is required for the battery.

8. Fejlfinding

9. Specifikationer

Figur 9.1: Bund view of the timer, displaying the product label with model number, electrical ratings, and certifications.

10. Garanti og support

Westek products are designed for reliability and performance. For specific warranty information or technical support, please refer to the warranty card included with your product or visit the official Westek webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.