Philips myLiving PONGEE LED-spotlampe (model 5058131PN) brugermanual

1. Introduktion

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse:

Elektrisk sikkerhed: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
Kun indendørs brug: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
Pære type: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage angivet på armaturet.
Håndtering: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
Rensning: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

Philips myLiving PONGEE LED Spot Light fixture (1 unit)
Monteringsudstyr (skruer, vægdyvler)
Brugsanvisning

Note: A GU10 LED bulb is ikke inkluderet og skal købes separat.

Packaging box for Philips myLiving PONGEE LED Spot Light

Figur 2: Produktemballage

4. Opsætning og installation

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

Forbered installationsområdet: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
Afbryd strømmen: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
Monter basen: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
Tilslut armaturet: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
Installer pæren: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
Fastgør armaturhuset: Secure the main body of the spot light to the mounted base.
Gendan strøm: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Betjeningsvejledning

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

Tænd/sluk: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
Justering af lysretning: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Vedligeholdelse

Rensning: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
Udskiftning af pære:
1. Sluk for strømforsyningen ved afbryderen.
2. Allow the bulb to cool completely.
3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
5. Gendan strømmen.

7. Fejlfinding

Problem	Mulig årsag	Løsning
Lyset tændes ikke.	Ingen strømforsyning. Pæren er defekt eller ikke installeret korrekt. Løs ledningsforbindelse.	Tjek afbryderen eller sikringen. Ensure the wall switch is ON. Replace the bulb with a new GU10 LED bulb. Kontakt en kvalificeret elektriker for at kontrollere ledningsforbindelserne.
Lyse flimrer.	Løs pæreforbindelse. Inkompatibel lysdæmper (hvis relevant). Defekt pære.	Ensure the bulb is securely twisted into the socket. If using a dimmer, ensure it is compatible with LED bulbs. Udskift pæren.

8. Specifikationer

Mærke: Philips belysning
Modelnummer: 5058131PN
Produktmål (L x B x H): 10 x 13.8 x 8.2 cm
Varens vægt: 345 gram
Materiale: Metal
Farve: Hvid
Stil: Moderne
Lyskildetype: LED
Bulb Socket Type: GU10
Antal løg: 1 (bulb not included)
Input bindtage: 220-240 volt
Strømkilde: Electrical cable (wired)
Installationstype: Surface Mount (Ceiling/Wall)
IP-vurdering: IP20 (kun indendørs brug)
Særlige funktioner: Energy-efficient, Swivel head
Specifikke anvendelser: Home, Bedroom, Living Room

9. Garanti og support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webDu kan også kontakte din forhandler for at få hjælp.

Gem din købsbevis i tilfælde af garantikrav.

	Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: Datablad for højtydende LED-armaturer Teknisk datablad for Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, en højeffektiv LED-armatur med avancerede funktioner, specifikationer og anvendelsesdata. Indeholder detaljer om ydeevne, mekaniske og elektriske detaljer.
	Philips TubePoint: Højtydende armaturserie til trafikkunneler Udforsk Philips TubePoint-armaturserien, der er udviklet til effektive, omkostningseffektive og pålidelige belysningsløsninger i trafikkunneler. Denne produktseriebrochure beskriver funktioner, fordele, tekniske specifikationer og modelvariationer for optimal tunnelbelysning.
	Philips belysningskvalitetsmanual Denne kvalitetsmanual beskriver Philips Lighting Quality System og beskriver dets processer, standarder og engagement i kvalitet. Den fungerer som et supplement til Philips Lighting Business System og sikrer, at produkter og tjenester opfylder ISO 9001-kravene og kundernes forventninger.
	Philips CoreLine vægmonterede LED-armaturer Oplev Philips CoreLine vægmonterede LED-armatur, en innovativ, brugervenlig og højkvalitets belysningsløsning til forskellige anvendelser som gange, trapper og offentlige indgange. Denne brochure beskriver dens funktioner, fordele, tekniske specifikationer og produktinformation.
	Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor databladt datablade for den intelligente Philips OccuSwitch LRM1070/00 Anwesenheitssensor. Bietet PIR-teknologi, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. Enthält technische Spezifikationen und Abmessungen.
	Philips OccuSwitch LRM1070/00 Bevægelsesdetektor og lysafbryder Oplev Philips OccuSwitch LRM1070/00, en intelligent bevægelsesdetektor med en integreret kontakt, der er designet til at spare energi ved automatisk at slukke lyset i ubeboede rum. Den er ideel til rum på op til 25 m², håndterer belastninger på op til 6 A og er nem at installere med et aftageligt stik.

Philips Lighting 5058131PN