FERM CDM1132 Akku Skruetrækker Brugermanual

1. Produktet er slutview

The FERM CDM1132 Cordless Screwdriver is designed for light-duty screwing tasks. It features a compact and ergonomic design with a soft grip for comfortable handling. Equipped with a 3.6V, 1.3Ah Li-Ion battery, it provides sufficient power for household projects. The integrated LED work light illuminates your workspace, ensuring optimal visibility even in dimly lit areas. This screwdriver comes with a comprehensive 27-piece accessory set and a robust metal storage case for convenient transport and organization.

Nøglefunktioner:

• Praktisk design: Compact and ergonomic with soft grip for comfortable use.
• LED arbejdslys: Provides optimal visibility of your workpiece, even in dark corners.
• Micro-USB Charger: Enables fast charging for quick return to work.
• Magnetisk bitholder: Facilitates easy bit changes with its 1/4" hexagonal holder.

Figure 1.1: The FERM CDM1132 Cordless Screwdriver, showcasing its compact design and integrated LED light.

2. Sikkerhedsoplysninger

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

Generelle sikkerhedsadvarsler for elværktøj:

• Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Elektrisk sikkerhed: Udsæt ikke elværktøj for regn eller våde forhold. Vand, der trænger ind i et elværktøj, øger risikoen for elektrisk stød.
• Personlig sikkerhed: Vær opmærksom, hold øje med, hvad du laver, og brug din sunde fornuft, når du betjener et elværktøj. Brug ikke elværktøj, mens du er træt eller påvirket af stoffer, alkohol eller medicin.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din applikation. Det korrekte elværktøj vil gøre arbejdet bedre og mere sikkert til den hastighed, som det er designet til.
• Brug og vedligeholdelse af batteriværktøj: Genoplad kun med den oplader, der er specificeret af producenten. En oplader, der er egnet til én type batteripakke, kan skabe en brandrisiko, når den bruges sammen med en anden batteripakke.
• Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele. Dette vil sikre, at elværktøjets sikkerhed opretholdes.

3. Pakkens indhold

Upon opening the robust metal storage case, verify that all components are present and undamaged. The FERM CDM1132 Cordless Screwdriver package includes:

• FERM CDM1132 Cordless Screwdriver
• Mikro-USB oplader
• 27-piece Accessory Bit Set (various screwdriver bits)
• Metal Opbevaringskasse

Figure 3.1: The FERM CDM1132 Cordless Screwdriver and its complete 27-piece accessory set, neatly organized within the metal storage case.

4. Opsætning

4.1 Opladning af batteriet

The FERM CDM1132 is powered by an integrated 3.6V 1.3Ah Li-Ion battery. Before first use, or when the battery indicator shows low charge, fully charge the battery.

1. Locate the Micro-USB charging port on the bottom of the screwdriver handle.
2. Connect the provided Micro-USB cable to the screwdriver's charging port.
3. Connect the other end of the USB cable to the charger, and plug the charger into a suitable power outlet.
4. The battery indicator light (Figure 4.1) will illuminate to show charging status. Refer to the indicator light behavior for full charge status.
5. Once fully charged, disconnect the charger from the power outlet and the screwdriver.

Figur 4.1: Nærbillede view of the Micro-USB charging port on the screwdriver and the accompanying USB cable.

Figure 4.2: The battery indicator light, located near the base of the handle, shows the charging status and remaining battery life.

4.2 Indsætning og udskiftning af bits

The screwdriver features a magnetic 1/4" hexagonal bit holder for quick and secure bit changes.

1. Select the appropriate screwdriver bit from the accessory set for your task.
2. Firmly push the bit into the hexagonal bit holder at the front of the screwdriver until it clicks into place. The magnetic holder will secure the bit.
3. To remove a bit, simply pull it straight out from the holder.

Figur 4.3: Detaljeret view of the magnetic 1/4" hexagonal bit holder, designed for easy and secure bit insertion.

5. Betjening

5.1 Powering On/Off and Rotation Direction

The screwdriver is operated via a trigger switch and a direction selector.

• Sådan tænder du: Press the trigger switch located on the handle. The motor will start, and the LED work light will activate.
• Sådan slukker du: Slip udløserkontakten.
• Fremadrotation (indskruning): Push the direction selector switch (orange button) to the left (when viewed from the back of the tool).
• Omvendt rotation (udskruning): Push the direction selector switch to the right.
• Låseposition: When the direction selector switch is in the center position, the trigger is locked, preventing accidental activation.

Figure 5.1: The screwdriver in operation, showing the illuminated LED work light for enhanced visibility.

5.2 Brug af LED-arbejdslampen

The integrated LED work light automatically activates when the trigger switch is pressed, providing illumination for your work area, especially useful in dark or confined spaces.

5.3 General Screwdriving Tips

• Always select the correct bit type and size for the screw head to prevent stripping.
• Apply firm, steady pressure in line with the screw to prevent cam-out.
• For delicate materials, start at a lower speed if possible, or use short bursts of power.
• Avoid over-tightening screws, especially in soft materials, to prevent damage.

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your FERM CDM1132 Cordless Screwdriver.

6.1 Rengøring

• Frakobl altid opladeren før rengøring.
• Brug en blød, damp klud til at tørre værktøjets yderside af. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Keep the ventilation openings free from dust and debris to prevent overheating. Use compressed air if necessary.

6.2 Batteripleje og -opbevaring

• Store the screwdriver and battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, it is recommended to store the Li-Ion battery with a partial charge (around 50%). Avoid storing it fully charged or completely depleted.
• Recharge the battery every 3-6 months during long storage periods to maintain its health.
• Do not dispose of batteries in household waste. Follow local regulations for battery recycling.

7. Fejlfinding

If you encounter issues with your FERM CDM1132 Cordless Screwdriver, refer to the following common problems and solutions:

8. Specifikationer

Detailed technical specifications for the FERM CDM1132 Cordless Screwdriver:

9. Garanti og support

For information regarding the product warranty, please refer to the warranty card included in your product packaging or visit the official FERM website. For technical support, spare parts, or service inquiries, please contact FERM customer service through the contact details provided in your product documentation or on their official webwebsted.