NEC SL1100/SL2100 BE116506 Brugermanual til digitalt/analogt stationskort

1. Produktet er slutview

The NEC BE116506 Digital/Analog Station Card is designed for use with NEC SL1100 and SL2100 communication systems. This card provides essential interfaces for various station types and auxiliary functions, enhancing the versatility of your PBX system.

Billede 1.1: The NEC BE116506 Digital/Analog Station Card. This image displays the green circuit board with various electronic components, connectors, and the black faceplate with labeled ports for Trunks, ESI (1-4, 5-8), SLI (1-2), and RL/Audio connections.

Nøglefunktioner:

• Provides interface for 8 digital stations and 2 analog stations.
• Includes interfaces for Music-on-Hold or Background Music sources.
• Supports External Paging Zone functionality.
• Equipped with four 8-conductor interface jacks.
• Two jacks for 8 digital stations.
• One jack for 2 analog stations or Doorboxes.
• One jack for Music-on-Hold/Background Music input, External Paging Zone output, and two relay circuit connections.
• Relay circuits support Door-strike control (when analog ports are used for Doorboxes), control for Music-on-Hold/Background Music sources, and control of External Paging Equipment.
• Installs in universal slots 1-3 of Main or Expansion Chassis.
• Allows addition of one 3-Port CO Trunk Daughter Board (3COIDB) or one PRI Daughter Board (1PRDB).
• Maximum of 3 cards per Main or Expansion Chassis.
• Maximum of 9 cards per system.

2. Opsætning og installation

This section provides guidelines for the proper installation of the BE116506 Digital/Analog Station Card into your NEC SL1100 or SL2100 system. Ensure the system is powered off before beginning installation.

2.1. Card Placement

• The BE116506 card must be installed in universal slots 1-3 of either the Main Chassis or an Expansion Chassis.
• A maximum of three BE116506 cards can be installed per Main or Expansion Chassis.
• The total number of BE116506 cards across the entire system should not exceed nine.

2.2. Daughter Board Installation (Optional)

The BE116506 card supports the addition of a daughter board for expanded functionality:

• One 3-Port CO Trunk Daughter Board (3COIDB) can be added.
• Alternatively, one PRI Daughter Board (1PRDB) can be added.
• Refer to the specific daughter board's manual for detailed installation instructions.

2.3. Tilslutningskabler

The card is equipped with four 8-conductor interface jacks on its faceplate. Connect your system's cabling as follows:

• Digital Stations: Use the two dedicated jacks for connecting up to 8 digital stations.
• Analog Stations/Doorboxes: Use the single dedicated jack for connecting up to 2 analog stations or Doorboxes.
• Hjælpeforbindelser: The remaining jack is for Music-on-Hold/Background Music input, External Paging Zone output, and relay circuit connections.

Warning: Ensure all connections are secure and correctly aligned to prevent damage to the card or connected equipment. Consult a qualified technician if you are unsure about any installation steps.

3. Betjeningsvejledning

Once the BE116506 card is installed and the system is powered on, its interfaces become active. Configuration of specific features will typically be done through the PBX system's programming interface.

3.1. Digital and Analog Station Usage

• Digital stations connected to the card will function according to your system's programming for digital extensions.
• Analog stations (e.g., single-line phones, fax machines) or Doorboxes connected will operate based on their assigned extension numbers and system configurations.

3.2. Music-on-Hold / Background Music

Connect your Music-on-Hold or Background Music source to the designated input jack. The system's programming will determine when and how this audio is played to callers or internal users.

3.3. External Paging Zone

Connect your external paging equipment to the designated output jack. The PBX system's programming will allow users to initiate pages through this zone.

3.4. Relay Circuit Control

The two relay circuit connections provide control for external devices:

• Door-strike Control: If Doorboxes are connected to the analog ports, these relays can be programmed to control door-strike mechanisms, allowing users to remotely open doors.
• Music-on-Hold/Background Music Source Control: The relays can be used to activate or deactivate the external audio source connected for Music-on-Hold or Background Music.
• External Paging Equipment Control: Control external paging amplifiers or other equipment related to the paging zone.

Refer to your NEC SL1100/SL2100 system's programming manual for detailed instructions on configuring these features.

4. Vedligeholdelse

The NEC BE116506 Digital/Analog Station Card is designed for reliable operation with minimal maintenance. Adhering to the following guidelines can help ensure its longevity:

• Miljø: Ensure the PBX system chassis, where the card is installed, is kept in a clean, dry, and temperature-controlled environment. Avoid excessive dust, humidity, and extreme temperatures.
• Rensning: Periodically inspect the card and chassis for dust accumulation. If necessary, gently clean with compressed air. Do not use liquid cleaners directly on the card.
• Forbindelser: Ensure all cable connections to the card remain secure. Loose connections can lead to intermittent service or performance issues.
• Firmware: Keep your NEC SL1100/SL2100 system firmware updated as recommended by NEC. This ensures optimal compatibility and performance of all installed components, including the station card.

Caution: Do not attempt to repair the card yourself. Unauthorized repairs can void the warranty and may cause further damage.

5. Fejlfinding

If you encounter issues with your BE116506 Digital/Analog Station Card, consider the following basic troubleshooting steps:

• No Dial Tone/Service:
  • Verify the card is properly seated in its slot.
  • Check all connected cables for secure connections.
  • Confirm the station is correctly programmed in the PBX system.
  • Test with a known working phone or device.
• Music-on-Hold/Paging Not Working:
  • Ensure the audio source is connected and functioning.
  • Verify the external paging equipment is powered on and connected.
  • Check the PBX system's programming for Music-on-Hold/Paging settings.
• Relay Circuits Not Activating:
  • Confirm the external device (e.g., door-strike, amplifier) is correctly wired to the relay contacts.
  • Verify the relay control is properly programmed within the PBX system.
• System Errors: If the PBX system displays errors related to the card, consult your system administrator or NEC technical support.

For complex issues, it is recommended to contact a certified NEC technician or your system vendor for assistance.

6. Specifikationer

7. Vigtig information

7.1. Legal Disclaimer (Proposition 65 Warning)

Dette produkt indeholder kemikalier, der af staten Californien vides at forårsage kræft og fødselsdefekter eller anden reproduktionsskade.

8. Garanti og support

8.1. Garantioplysninger

Specific warranty details for the NEC BE116506 Digital/Analog Station Card are typically provided at the point of purchase or through official NEC documentation. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or contact your NEC dealer.

8.2. Teknisk support

For technical assistance, installation support, or troubleshooting beyond the scope of this manual, please contact your authorized NEC dealer or a certified PBX system technician. You may also visit the official NEC webwebsted for supportressourcer og kontaktoplysninger.

NEC Official Webwebsted: www.nec.com