Indledning
Welcome to the user manual for your new ThruNite TC12 V2 EDC Flashlight. This powerful and versatile LED flashlight is designed for everyday carry, offering exceptional brightness, reliable performance, and convenient USB-C recharging. Please read this manual carefully to ensure proper use, maintenance, and to maximize the lifespan of your device.
Image: The ThruNite TC12 V2 flashlight shown alongside its rechargeable 18650 battery.
Pakkens indhold
Når du åbner din ThruNite TC12 V2-pakke, bør du finde følgende:
- 1 x ThruNite TC12 V2 Cool White Flashlight
- 1 x ThruNite 18650 Rechargeable Battery (3400mAh)
- 1 x USB-C opladningskabel
- 1 x snor
- 1 x hylster
- 1 x Pocket Clip (pre-installed or separate)
- Reserve O-ringe
- Ekstra USB-portdæksel
Image: All items included in the ThruNite TC12 V2 flashlight package, laid out for inspection.
Opsætning
Installation af batteri
- Skru lommelygtens bagdæksel af ved at dreje den mod uret.
- Insert the included ThruNite 18650 battery with the positive (+) end facing towards the head of the flashlight (towards the LED).
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened for proper electrical contact and water resistance.
Opladning
The TC12 V2 features a built-in USB-C charging port for convenient recharging of the included 18650 battery.
- Locate the USB-C charging port on the side of the flashlight, usually covered by a rubber flap.
- Gently lift the rubber flap to expose the port.
- Connect the included USB-C cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- Indikatorlampen på sidekontakten viser opladningsstatus:
- Blå: Charging complete.
- Rød: Opladning i gang.
- Once charging is complete, disconnect the USB-C cable and firmly press the rubber flap back into place to ensure water resistance.
Billede: Nærbillede view of the ThruNite TC12 V2 flashlight, highlighting the USB-C charging port located on the side.
Operation
The TC12 V2 features both a tail switch and a side switch for versatile operation.
Tail Switch Operations
- Øjeblikkelig tændt: Tryk let på bagkontakten for et kortvarigt lys. Slip for at slukke.
- Konstant tænd/sluk: Fully press the tail switch until it clicks to turn the flashlight on or off.
- Øjeblikkelig turbo: From off, fully press and hold the tail switch to activate Turbo mode instantly. Release to turn off.
Image: The tail cap of the ThruNite TC12 V2 flashlight, where the primary power switch is located.
Side Switch Operations (when flashlight is ON via tail switch)
- Skift tilstande: From ON, press and hold the side switch to cycle through Firefly, Low, Medium, and High modes. Release the switch to select the desired mode. The flashlight has mode memory and will turn on in the last used general mode (excluding Turbo and Strobe).
- Øjeblikkelig turbo: Double-click the side switch quickly to activate Turbo mode. Double-click again to return to the previous mode.
- Strobetilstand: Triple-click the side switch quickly to activate Strobe mode. Double-click to return to the previous mode.
- Ildfluetilstand: Fra FRA skal du trykke på sidekontakten og holde den nede i 1 sekund for at aktivere Ildfluetilstand.
Image: The ThruNite TC12 V2 flashlight, highlighting the side switch with its integrated indicator light.
Opretholdelse
- Rensning: Rengør gevind og O-ringe regelmæssigt med en ren klud. Påfør et tyndt lag silikonefedt på O-ringene med jævne mellemrum for at opretholde vandtætheden.
- Batteripleje: Store the battery in a cool, dry place when not in use. If the flashlight will not be used for an extended period, remove the battery to prevent parasitic drain and potential damage.
- USB-port: Ensure the rubber cover for the USB-C charging port is always securely closed when not charging to prevent dust and water ingress.
- Rengøring af linser: Use a soft, lint-free cloth to clean the lens. Avoid abrasive materials that could scratch the surface.
Fejlfinding
If you encounter issues with your ThruNite TC12 V2, please refer to the table below for common problems and their solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lommelygten tænder ikke. | Battery is dead or improperly installed. Tail cap is loose. | Charge the battery. Ensure battery is inserted with positive (+) end towards the head. Tighten the tail cap fully. |
| Lyset er svagt eller flimrer. | Low battery. Poor contact between battery and contacts. | Recharge the battery. Clean battery contacts and flashlight contacts. Ensure tail cap is tight. |
| Ladeindikatoren virker ikke. | USB cable or power source issue. Charging port cover not fully open. | Try a different USB cable or power source. Ensure the rubber cover is fully open and the cable is inserted correctly. |
| Lommelygten bliver hurtigt varm. | Drift i turbotilstand i længere perioder. | This is normal for high-output flashlights. Reduce output to a lower mode if it becomes too hot to handle. The flashlight has thermal regulation to prevent overheating. |
Specifikationer
Detailed technical specifications for the ThruNite TC12 V2 CW Flashlight:
| Feature | Detalje |
|---|---|
| Model | TC12 V2 CW |
| Mærke | ThruNite |
| Lyskildetype | LED |
| Max Output Brightness | 1100 lumen |
| Maksimal stråleafstand | 240 meter |
| Strømkilde | Battery Powered (1x 18650 rechargeable battery included) |
| Opladning | USB-C genopladelig |
| Materiale | Aluminum (Type III hard-anodized finish) |
| Vandmodstandsniveau | IPX-8 (2 meter nedsænkbar) |
| Slagmodstand | 1 meter |
| Produktdimensioner | 1 cm D x 25.4 cm B x 1 cm H (ca. 25.4 mm x 5.51 mm x 140 mm) |
| Farve | Black (TC12 V2 CW) |
Billede: En detaljeret view of the LED emitter and reflector assembly within the ThruNite TC12 V2 flashlight head.
Garanti og support
ThruNite products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the warranty card included in your product packaging or visit the official ThruNite website. You may also contact ThruNite customer service directly for assistance with product operation, troubleshooting, or warranty claims.
For the most up-to-date information and contact methods, please visit: www.thrunite.com
