TOZO Q1012 X8tw Drone RC Quadcopter Brugermanual

1. Introduktion

This manual provides detailed instructions for the safe operation and maintenance of your TOZO Q1012 X8tw RC Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Image: The TOZO Q1012 X8tw drone, black in color, with its four propellers extended, viewed from above. The drone features a sleek design with a white stripe down the center.

2. Pakkens indhold

Bekræft, at alle nedenstående varer er til stede i din pakke:

Billede: En overview of the TOZO Q1012 X8tw drone's package contents, including the drone, remote transmitter, screws, battery, USB charging cable, spare propellers, screwdriver, phone holder, and the operation manual.

• TOZO Q1012 X8tw RC Quadcopter
• Fjernsender
• Rechargeable Drone Battery
• USB opladningskabel
• Spare Propellers (set of 4)
• Skruetrækker
• Phone Holder for Transmitter
• Instruktionsmanual
• Screws (for propeller attachment)

3. Produktfunktioner

• Sammenfoldeligt design: The drone arms can be folded for compact storage and portability.

  Image: Demonstrates the foldable design of the TOZO Q1012 X8tw drone, showing both its compact folded state (122x94x57mm) and its unfolded state (343x313x91mm) with propellers extended.
• Højdehold: Maintains a consistent altitude, simplifying flight control.
• Hovedløs tilstand: Eliminates the need to adjust the drone's position before flight, as the forward direction is relative to the pilot.

  Image: Illustrates the Headless Mode feature of the TOZO Q1012 X8tw drone, showing directional arrows indicating that the drone will move relative to the controller's orientation, regardless of the drone's front-facing direction.

• FPV (førstepersons) View) with WiFi 720P HD Camera: Stream live video to your smartphone via WiFi.
• 6-Axis Gyro: Provides stable flight and easy control.
• 3D 360-Degree Flips: Perform aerial stunts with a single button.
• 2.4Ghz 4-Channel Control: Ensures strong signal and precise control.

4. Sikkerhedsretningslinjer

• Operate the drone in open areas, away from people, animals, and obstacles.
• Do not fly near airports or restricted airspace.
• Undgå at flyve i stærk vind eller ugunstige vejrforhold.
• Hold fingre og hår væk fra roterende propeller.
• Sørg for, at batteriet er fuldt opladet før hver flyvning.
• Supervise children during drone operation.
• Undlad at ændre dronen eller dens komponenter.

5. Opsætning

5.1 Dronesamling

1. Unfold the Arms: Gently extend the four arms of the drone until they lock into position. Refer to the foldable design image in Section 3.
2. Installer propeller: Attach the propellers to the motor shafts, ensuring correct orientation (A and B propellers are typically marked and correspond to specific motor positions). Secure with screws if necessary.
3. Installer landingsudstyr: Attach the landing gear to the bottom of the drone.

5.2 Batteriinstallation og opladning

1. Charge Drone Battery: Connect the drone battery to the USB charging cable, then plug the USB cable into a USB power source (e.g., computer, USB wall adapter). The indicator light will show charging status and turn off when fully charged.
2. Installer dronebatteri: Open the battery compartment on the drone and insert the fully charged battery. Connect the battery connector to the drone's power port. Close the compartment securely.
3. Installer senderbatterier: Open the battery compartment on the remote transmitter and insert 4x AAA batteries (not included), observing polarity. Close the compartment.

5.3 Sender overview

Image: A detailed diagram of the TOZO Q1012 X8tw drone's remote transmitter, labeling various controls such as the LCD display, accelerator/left and right rotatory rocker, front rear left and right rocker, fine-tuning buttons, power switch, light switch, speed toggle, and automatic landing/emergency stop buttons.

• LCD-skærm: Shows flight information.
• Left Stick (Accelerator/Left & Right Rotatory Rocker): Styrer højde (op/ned) og rotation (venstre/højre).
• Right Stick (Front Rear Left & Right Rocker): Styrer bevægelse fremad/bagud og venstre/højre.
• Fine Tuning Buttons: Adjust drone drift for stable flight.
• Afbryderen: Tænder/slukker senderen.
• Lyskontakt: Controls drone LED lights.
• High/Intermediate/Low Speed Toggle: Ændrer flyvehastigheden.
• Automatic Landing Button: Press and hold for 2 seconds to initiate automatic landing.
• Nødstop: Press both bottom buttons simultaneously for emergency stop.

6. Betjeningsvejledning

6.1 Pairing the Drone and Transmitter

1. Placer dronen på en flad, plan overflade.
2. Tænd dronens strømafbryder. Dronens indikatorlamper vil blinke.
3. Turn on the transmitter's power switch.
4. Push the left throttle stick (accelerator) fully up, then pull it fully down. The drone lights will stop flashing and remain solid, indicating successful pairing.

6.2 Kalibrering

After pairing, perform a gyroscope calibration for stable flight:

1. Ensure the drone is on a flat surface.
2. Push both control sticks down and to the right simultaneously (as shown in step 3 of the "How to Take Off" image). The drone lights will flash rapidly and then become solid, indicating successful calibration.

6.3 How to Take Off

Image: A six-step visual guide demonstrating the take-off procedure for the TOZO Q1012 X8tw drone, including pushing the throttle up and down for pairing, calibrating by pushing both sticks down-right, unlocking by pushing both sticks down-left, and finally pushing the left stick up to take off.

1. Parring: Push the throttle lever up (1), then down (2).
2. Kalibrering: Push both control sticks down and to the right (3).
3. Lås op: Push both control sticks down and to the left (4). The propellers will start spinning slowly.
4. Afgang: Push the left throttle stick up to ascend (6).

6.4 Flyvekontrol

• Stig op/ned: Use the left stick (throttle) up or down.
• Frem/tilbage: Use the right stick up or down.
• Drej til venstre/højre (drej): Use the left stick left or right.
• Fly Left/Right (Roll): Use the right stick left or right.
• Højdehold: Once the drone reaches a desired altitude, release the left stick, and the drone will attempt to maintain that height.
• Hovedløs tilstand: Press the Headless Mode button (refer to transmitter diagram). The drone will orient itself relative to the pilot, regardless of its front direction. Press again to exit.
• 360-graders vendinger: Press the 3D Flip button, then push the right stick in the desired flip direction.

6.5 Landing

• Manuel landing: Slowly pull the left throttle stick down until the drone lands.
• Automatisk landing: Press and hold the automatic landing button on the transmitter for 2 seconds. The drone will descend and land automatically.

6.6 FPV and Camera Operation (via Phone WiFi Direct Control)

Image: Displays two methods of controlling the TOZO Q1012 X8tw drone: via the included transmitter with a phone monitor attached, or directly via phone WiFi control using a compatible iOS/Android app. It also notes that data is stored directly on the phone, eliminating the need for a TF card.

1. Download app: Søg efter the official TOZO drone app on your smartphone's app store (iOS/Android).
2. Connect to Drone WiFi: Turn on the drone. On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "TOZO-Q1012-XXXX").
3. Start app: Open the TOZO drone app. You should see a live FPV feed from the drone's camera.
4. Record Video/Take Photos: Use the controls within the app to start/stop video recording or take still photos. Captured media is stored directly on your phone.

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the drone body and camera lens. Do not use harsh chemicals or solvents.
• Udskiftning af propel: If a propeller is damaged, replace it with a new one from the spare parts. Ensure the correct propeller type (A or B) is installed on the corresponding motor.
• Batteripleje: Store batteries in a cool, dry place. Do not overcharge or over-discharge.
• Opbevaring: When not in use for extended periods, remove batteries from both the drone and transmitter. Store the drone in a cool, dry environment.

8. Fejlfinding

• Drone not responding to transmitter:
  • Ensure both drone and transmitter are powered on.
  • Re-pair the drone and transmitter (Section 6.1).
  • Kontroller senderens batterier.
• Drone unstable during flight/drifting:
  • Perform gyroscope calibration (Section 6.2).
  • Use the fine-tuning buttons on the transmitter to correct drift.
  • Check for damaged propellers and replace if necessary.
• No FPV feed on smartphone:
  • Ensure the drone's WiFi is enabled and your phone is connected to it.
  • Restart the drone and the app.
  • Tjek apptilladelser på din telefon.
• Kort flyvetid:
  • Sørg for, at dronens batteri er fuldt opladet.
  • Battery life may decrease over time; consider replacing old batteries.

9. Specifikationer

10. Garanti og support

TOZO products come with a standard warranty. For detailed warranty information, technical support, or replacement parts, please visit the official TOZO webhjemmeside eller kontakt deres kundeservice direkte.

Official TOZO Store: Visit the TOZO Store on Amazon