Flexispot EB2B Electric Height-Adjustable Desk Frame User Manual

1. Introduktion

Thank you for choosing the Flexispot EB2B Electric Height-Adjustable Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk frame. Please read this manual thoroughly before installation and keep it for future reference.

Image: The Flexispot EB2B desk frame supporting a complete desk setup, highlighting its dual-motor design.

2. Sikkerhedsoplysninger

For at sikre sikker drift og forhindre skader, bedes du overholde følgende sikkerhedsforanstaltninger:

• Sørg for, at alle komponenter er forsvarligt fastgjort før brug.
• Overskrid ikke den maksimale vægtkapacitet på 100 kg (220 lbs).
• Hold børn og kæledyr væk fra skrivebordet under brug for at forhindre skader fra bevægelige dele.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to prevent damage, but manual vigilance is always recommended.
• Do not disassemble or modify the desk frame or its electrical components. Contact qualified personnel for repairs.
• Afbryd strømmen før rengøring eller udførelse af vedligeholdelse.

Image: Visual representation of the anti-collision system, showing the desk rebounding upon detecting an obstruction.

3. Pakkens indhold

Kontroller venligst, at alle dele er til stede, før monteringen påbegyndes:

• Skrivebordsben (2)
• Fødder (2)
• Tværstang (1)
• Sidebeslag (2)
• Kontrolboks (1)
• Handset/Control Panel (1)
• Strømadapter (1)
• Strømledning (1)
• Cable Management Clips (4)
• Samlebeslag (skruer, unbrakonøgler osv.)

Image: All main components of the Flexispot EB2B desk frame, including the dual legs, crossbar, and control panel.

4. Opsætning og montering

Follow these steps to assemble your Flexispot EB2B desk frame. It is recommended to have two people for assembly.

1. Forbered området: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Fastgør fødder til ben: Fastgør fødderne sikkert til bunden af ​​hvert skrivebordsben med de medfølgende skruer.
3. Assemble the Crossbar: Connect the two desk legs to the adjustable crossbar. Ensure the crossbar is extended to the desired width to accommodate your tabletop (Min: 110cm, Max: 180cm).
4. Installer sidebeslag: Attach the side brackets to the top of the desk legs, which will support your tabletop.
5. Monter kontrolboksen: Secure the control box to the designated area under the crossbar.
6. Tilslut kabler: Connect the motor cables from each leg to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box and the power cord to the adapter.
7. Fastgør bordplade: Carefully place your tabletop (not included) onto the assembled frame. Ensure it is centered and aligned. Secure the tabletop to the frame using appropriate screws (ensure screws are not too long to penetrate the tabletop surface). The frame is compatible with tabletops from 110 cm to 180 cm wide and 50 cm to 80 cm deep.
8. Kabelstyring: Use the provided cable management clips to organize and secure all cables, preventing them from dangling or getting caught.

Image: A diagram illustrating the adaptable desktop sizes (width and depth) that the Flexispot EB2B desk frame can accommodate.

5. Betjeningsvejledning

The Flexispot EB2B features a user-friendly control panel for height adjustment and memory functions.

5.1. Basic Height Adjustment

• Løft skrivebordet: Tryk og hold på UP (^) button to raise the desk to your desired height.
• Nederste skrivebord: Tryk og hold på DOWN (v) button to lower the desk to your desired height.
• The LED display will show the current height in centimeters. The desk operates smoothly and quietly, with a noise level below 50 dB and a lifting speed of 3.2 cm/sec.

5.2. Hukommelsesforudindstillinger

The control panel allows you to save up to four preferred height settings.

1. Juster skrivebordet til den ønskede højde ved hjælp af OP/NED-knapperne.
2. Tryk på M button (or 'S' depending on the model) followed by the desired preset number (1, 2, 3 eller 4). The display will show 'S-' then the number, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding preset number (1, 2, 3 eller 4Skrivebordet flytter sig automatisk til den gemte position.

5.3. Sedentary Reminder System

The advanced control panel includes a sedentary reminder system to encourage healthy work habits. Consult your specific control panel's instructions for activating and setting reminder intervals.

5.4. Antikollisionssystem

The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. You can adjust the sensitivity of this system (refer to the detailed control panel manual for specific steps).

Billede: En detaljeret view of the control panel, showing the LED display, up/down buttons, and four memory preset buttons.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer dit skrivebordsstels levetid og optimale ydeevne.

• Rensning: Tør skrivebordsstellet af med en blød, tør kludamp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the desk is unplugged before cleaning.
• Inspektion: Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er fastspændte. Efterspænd om nødvendigt.
• Kabeltjek: Sørg for, at alle kabler er korrekt tilsluttet og ikke er beskadigede.
• Smøring: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by Flexispot support.

7. Fejlfinding

If you encounter issues with your Flexispot EB2B desk frame, refer to the following common problems and solutions:

7.1. Nulstillingsprocedure

If the desk is not functioning correctly, a reset may resolve the issue:

1. Tryk og hold på DOWN (v) button until the desk reaches its lowest position and slightly rebounds. Continue holding for approximately 5-10 seconds until the display shows 'RST' or 'RESET'.
2. Release the button. The desk will then move slightly up and down to calibrate. Once the display shows the lowest height (e.g., 71.0), the reset is complete.

8. Specifikationer

Image: The Flexispot EB2B frame demonstrating its large height adjustment range (70-119 cm) and anti-collision feature.

9. Garanti og support

Flexispot stands behind the quality of its products.

• Rammegaranti: The desk frame is covered by a 5 års garanti.
• Motor and Controller Warranty: The motors and controllers are covered by a 3 års garanti.

For warranty claims, technical support, or any questions not covered in this manual, please contact Flexispot customer service through their official website or your point of purchase. Please have your model number (EB2B) and purchase information ready.

Image: Visual representation of the warranty terms: 5 years for the desk frame and 3 years for controllers and motors.