Indledning
The BRITA MAXTRA+ Replacement Water Filter Cartridges are designed to enhance the quality of your tap water. Utilizing MicroFlow technology, these filters reduce impurities such as chlorine, limescale, lead, and copper. This process improves the taste and appearance of both hot and cold beverages. The cartridges are also 100% recyclable, supporting environmental responsibility.
These cartridges are compatible with all BRITA jugs, including models featuring the 'PerfectFit' system like Aluna, Marella, and Style.
Image: Three BRITA MAXTRA+ water filter cartridges, ready for use. Each cartridge is white with the "MAXTRA+" logo.
Opsætning og installation
Follow these steps to properly install your new BRITA MAXTRA+ filter cartridge:
- Forberedelse: Remove the new MAXTRA+ filter cartridge from its protective packaging.
- Indledende skylning: Submerge the new filter cartridge in cold water for approximately 15 minutes. This helps to remove any air bubbles and prepare the filter material.
- Insert into Funnel: Place the filter cartridge into the funnel of your BRITA water filter jug. Ensure it is firmly seated. If your jug has the 'PerfectFit' system, push the filter down until you hear a click, indicating a secure fit.
- First Fills: Fill the jug with tap water. Discard the first two filtered fills. This flushes out any loose carbon particles and primes the filter for optimal performance.
- Set Filter Change Indicator: If your BRITA jug has an electronic or manual filter change indicator, reset it according to your jug's specific instructions. This will help you track when to replace the filter.
Image: A diagram illustrating the BRITA PerfectFit system, showing how the MAXTRA+ filter cartridge securely fits into the jug's funnel for optimal filtration.
Betjeningsvejledning
Using your BRITA water filter jug with MAXTRA+ cartridges is straightforward:
- Fyldning: Simply fill the jug's reservoir with cold tap water. The water will pass through the MAXTRA+ filter cartridge into the main jug compartment.
- Anvendelse: Once filtered, the water is ready for consumption or use in preparing hot and cold beverages. The MicroFlow technology ensures a noticeable improvement in taste and appearance.
- Filterets levetid: Each MAXTRA+ filter cartridge is designed to last approximately 4 weeks or filter about 100 liters of water, depending on water hardness and usage. For best results and consistent water quality, replace the filter regularly as indicated by your jug's filter change reminder.
- Miljøfordel: Using filtered tap water with BRITA MAXTRA+ cartridges helps reduce the consumption of single-use plastic bottles.
Image: A visual representation of improved beverage quality, showing a cup of coffee and a cup of tea, with a stamp indicating recommendation by The UK Tea Academy.
Image: A BRITA MAXTRA+ filter cartridge positioned next to a stack of British pence coins, illustrating the cost-effectiveness of filtered water compared to bottled water.
Image: A BRITA water filter jug with a MAXTRA+ filter, positioned beside a collection of empty plastic water bottles, conveying the message of achieving pure, refreshing taste with less waste.
Opretholdelse
Proper maintenance ensures the longevity of your BRITA jug and the effectiveness of your filter:
- Rengøring af kande: Regularly clean your BRITA water filter jug according to the manufacturer's instructions for the jug itself. Most components (excluding the lid with electronic indicator) are dishwasher safe.
- Filterudskiftning: Replace the MAXTRA+ filter cartridge every 4 weeks or after filtering 100 liters of water. Timely replacement ensures continued reduction of impurities.
- Genbrug: BRITA MAXTRA+ filter cartridges are 100% recyclable. Look for designated recycling bins at participating retailers or check BRITA's official website for local recycling programs.
Image: A blue recycling symbol encompassing a BRITA MAXTRA+ filter cartridge, emphasizing the product's recyclability.
Fejlfinding
If you encounter any issues with your BRITA MAXTRA+ filter, consider the following:
- Langsom filtrering:
- Ensure the filter was properly pre-soaked to remove air bubbles.
- Check if the filter is securely seated in the funnel.
- If the filter is old, it may be clogged. Replace the filter cartridge.
- Usædvanlig smag eller lugt:
- Ensure the first two fills after installation were discarded.
- Verify that the filter cartridge is not past its recommended lifespan (4 weeks/100 liters). Replace if necessary.
- Ensure the jug and all its components are clean.
- Filteret passer ikke korrekt:
- Confirm you are using a genuine BRITA MAXTRA+ filter cartridge.
- Ensure the filter is aligned correctly with the funnel's opening and pushed down firmly. For 'PerfectFit' jugs, listen for a click.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 1029990 |
| Produktdimensioner | 5.79 cm D x 24.00 cm B x 11.61 cm H (2.28 cm D x 9.45 cm B x 4.57 cm H) |
| Varens vægt | 130 gram (4.59 ounce) |
| Materiale | Plast |
| Fabrikant | BRITA |
| Første ledige dato | 17. juli 2017 |
| Ekstern testcertificering | ADA |
| Produktfordele | Inhibits Lime-Scale Growth, Reduces Chlorine, Lead, Copper, and other impurities. |
Garanti og support
Information regarding specific warranty terms for BRITA MAXTRA+ Replacement Water Filter Cartridges is not provided within this manual. For detailed warranty information, product support, or to contact customer service, please refer to the official Brita website or the documentation included with your BRITA water filter jug.
You can typically find support resources by visiting the Brita Store on Amazon or the main Brita corporate webwebsted.
