HP P1B11A papirføder og stativ brugermanual

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of your HP P1B11A Paper Feeder and Stand. This accessory is designed to enhance the paper handling capabilities of compatible HP Color LaserJet Enterprise M652, M653, and LaserJet Enterprise Flow series printers by adding three additional 550-sheet input trays, totaling an extra 1650 sheets of capacity.

Figur 1: The HP P1B11A Paper Feeder and Stand. This image shows the white, rectangular unit with three distinct paper trays, designed to sit beneath a compatible HP LaserJet printer. The top surface is where the printer would be mounted.

2. Pakkens indhold

Verify that all items are present in the package before proceeding with installation. If any items are missing or damaged, contact your vendor or HP support.

• HP Color LaserJet 3x550-sheet Paper Feeder with Stand
• Documentation (Hardware Install Guide)

3. Sikkerhedsoplysninger

Read all safety instructions before using this product to prevent injury or damage to the equipment.

• Tung genstand: The paper feeder and stand unit is heavy (approximately 52 pounds or 23.6 kg). Use proper lifting techniques or seek assistance when moving or installing the unit to prevent injury.
• Stabil overflade: Ensure the unit is placed on a stable, level surface capable of supporting its weight and the weight of the printer.
• Ventilation: Bloker ikke ventilationsåbningerne. Sørg for tilstrækkelig luftgennemstrømning omkring enheden.
• Elektrisk sikkerhed: This unit connects to a compatible printer. Ensure the printer's power supply is disconnected before connecting or disconnecting the paper feeder.

4. Opsætning og installation

Follow these steps to properly install the HP P1B11A Paper Feeder and Stand with your compatible HP LaserJet printer.

1. Pak enheden ud: Carefully remove the paper feeder and stand from its packaging. Retain all packaging materials for future transport if needed.
2. Placer stativet: Place the stand in the desired location, ensuring it is on a stable and level surface. Consider the space required for paper loading and printer operation.
3. Klargør printeren: Turn off and unplug your HP LaserJet printer. Remove any existing paper trays or accessories from the bottom of the printer as instructed in your printer's manual.
4. Mount the Printer: Carefully lift the printer and align it with the top surface of the HP P1B11A Paper Feeder and Stand. Lower the printer onto the feeder, ensuring it seats correctly and securely. Refer to the included Hardware Install Guide for specific alignment instructions.
5. Tilslut kabler: Reconnect the printer's power cable and any data cables (e.g., USB, Ethernet). The paper feeder typically connects directly to the printer's internal paper path and does not require separate power or data cables.
6. Tænd og konfigurer: Plug in the printer's power cable and turn on the printer. The printer should automatically detect the new paper feeder. You may need to access the printer's control panel or web interface to configure the new trays, such as setting paper types and sizes for each tray.

5. Betjeningsvejledning

This section details how to load paper into the trays of the HP P1B11A Paper Feeder.

5.1 Ilægning af papir

1. Open a Tray: Gently pull out one of the three paper trays until it stops.
2. Juster hjælpelinjer: Adjust the paper width and length guides to match the size of the paper you intend to load. Ensure the guides fit snugly against the paper stack without bending the paper.
3. Ilæg papir: Place a stack of paper into the tray. Ensure the paper is flat and not creased. Do not exceed the maximum fill line indicated inside the tray. The maximum input sheet capacity per tray is 550 sheets.
4. Luk bakke: Carefully push the tray back into the unit until it clicks into place.
5. Configure Paper Settings (if necessary): If prompted by the printer, confirm or adjust the paper type and size settings for the loaded tray on the printer's control panel.

Note: The paper feeder supports various media types and sizes, including plain paper up to 8.5 x 14 inches (Legal). Refer to your printer's documentation for a complete list of supported media.

6. Vedligeholdelse

Regular maintenance helps ensure optimal performance and longevity of your paper feeder.

6.1 Rengøring af enheden

• Udvendig rengøring: Wipe the exterior surfaces of the paper feeder with a soft, lint-free cloth dampskylles med vand. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Indvendig rengøring: Periodically remove the paper trays and inspect the interior for dust or paper debris. Use a dry, soft cloth or a small vacuum cleaner to remove any accumulation.
• Papirsti: If paper jams occur frequently, inspect the paper path within the trays for any obstructions or worn rollers. Refer to your printer's service manual for detailed paper path cleaning instructions, as the feeder integrates with the printer's system.

6.2 Generel pleje

• Avoid placing heavy objects on top of the unit (other than the printer it supports).
• Keep the unit away from direct sunlight, excessive heat, and moisture.

7. Fejlfinding

This section addresses common issues you might encounter with the HP P1B11A Paper Feeder.

For more detailed troubleshooting, refer to your HP LaserJet printer's user manual or visit the official HP support webwebsted.

8. Specifikationer

9. Garanti og support

9.1 Garantioplysninger

The HP P1B11A Paper Feeder and Stand comes with a limited warranty. Please refer to the documentation included in your package or visit the official HP webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region.

9.2 Kundesupport

For technical assistance, troubleshooting, or to inquire about service, please contact HP Customer Support. You can find contact information and additional resources on the official HP support webwebsted:

HP's officielle support Webwebsted

When contacting support, please have your product model number (P1B11A) and serial number ready.