Indledning
This instruction manual provides essential information for the proper setup, operation, and maintenance of your Timex Transcend 34mm Women's Analog Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Produkt overview
The Timex Transcend watch combines a modern stylish design with reliable analog-quartz movement. It features a 34mm case diameter and a stainless steel mesh bracelet, offering both elegance and comfort. The watch is water-resistant to 30 meters (100 feet).
Opsætning
Indstilling af tid
- Find kronen på højre side af urkassen.
- Gently pull the crown outwards to position 2. You will feel a slight click.
- Drej kronen med eller mod uret for at indstille time- og minutviserne til det korrekte klokkeslæt.
- Once the time is set, push the crown back into its original position (position 1) to start the watch movement.
Adjusting the Mesh Bracelet
The stainless steel mesh bracelet features an adjustable clasp for a comfortable fit. To adjust:
- Open the safety clasp and lift the main clasp lever.
- Using a small, flat tool (like a small screwdriver or a paperclip), gently pry open the locking plate on the clasp.
- Slide the clasp along the mesh band to the desired position. Ensure the clasp is centered on your wrist.
- Press the locking plate back down firmly until it clicks into place. Ensure it is securely fastened.
- Close the main clasp lever and then the safety clasp.
Drift
Your Timex Transcend watch is designed for reliable timekeeping. Once the time is set, the watch will operate continuously until the battery requires replacement.
Vandmodstand
This watch is water resistant to 30 meters (100 feet). This means it can withstand splashes or brief immersion in water. It is ikke suitable for swimming, bathing, showering, or diving. Avoid operating the crown while the watch is wet to prevent water intrusion.
Opretholdelse
Udskiftning af batteri
The watch requires one CR2 battery (included). When the watch stops running, it indicates the battery needs replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Rensning
To clean your watch, wipe the case and bracelet with a soft, damp cloth. For the mesh bracelet, a soft brush can be used to gently remove dirt from the links. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.
Fejlfinding
- Uret går ikke: Kontroller, om kronen er trykket helt ind. Hvis den er det, skal batteriet muligvis udskiftes.
- Tidspunktet er unøjagtigt: Ensure the crown is fully pushed in after setting the time. If the issue persists, the battery may be low or the movement may require servicing.
- Bracelet feels loose/tight: Refer to the "Adjusting the Mesh Bracelet" section for instructions on how to resize the band.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Timex |
| Modelnummer | TW2R361009J |
| Æske diameter | 34 mm |
| Bevægelse | Analog-Quartz |
| Vandmodstand | 30 m (100 fod) |
| Materiale | Brass (case) |
| Armbånd materiale | Rustfrit stålnet |
| Batteritype | 1 CR2 batteri |
Garanti og support
Your Timex watch is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, registration, or to access customer support, please visit the official Timex webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.
For yderligere hjælp kan du besøge Timex-butik på Amazon.
