1. Introduktion
This manual provides essential instructions for the safe and efficient operation of your uxcell Intelligent 25A Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the product.
2. Sikkerhedsinstruktioner
- Ensure all connections are tight and correct to avoid excessive voltage drop and potential hazards.
- The controller is designed for indoor use. Protect it from water, moisture, and direct sunlight.
- Installer styreenheden i et godt ventileret område for at forhindre overophedning.
- Connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order.
- Do not attempt to disassemble or repair the controller yourself. Contact qualified personnel for service.
- Opbevares utilgængeligt for børn.
3. Produktet er slutview
The uxcell Intelligent 25A Solar Charge Controller is designed to manage the power flow from your solar panel to your battery and load. It features an LCD display for monitoring system status and buttons for adjusting settings.
Billede 3.1: Front view of the uxcell Intelligent 25A Solar Charge Controller. This image highlights the display screen, control buttons, and the connection terminals for the solar panel, battery, and load, clearly labeled for identification.
Nøglekomponenter:
- LCD-skærm: Shows real-time system information such as voltage, current, and charge status.
- Indstillingsknapper: Bruges til at navigere i menuer og justere parametre.
- Solpanelterminaler: Connect to your solar photovoltaic array.
- Batteriterminaler: Connect to your 12V or 24V battery bank.
- Belastningsterminaler: Tilslut til dine DC-belastninger.
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | uxcell |
| Modelnummer | a17031000ux0297 (PV2425) |
| Nominel strøm | 25A |
| System Voltage | 12V / 24V Auto-sensing |
| Display Type | LCD eller LED |
| Farve | Orange |
| Varens vægt | 331 g |
| Forsendelsesvægt | 0.33 kilo |
| UPC | 601382631143 |
Billede 4.1: Physical dimensions of the uxcell Intelligent 25A Solar Charge Controller, showing a width of 6.6 inches, height of 3.5 inches, and depth of 1.6 inches.
5. Opsætning og installation
Follow the wiring sequence carefully to ensure proper and safe operation of the solar charge controller. Incorrect wiring can damage the controller, battery, or other components.
- Tilslut batteriet: Connect the battery to the controller's battery terminals first. Ensure correct polarity (positive to positive, negative to negative). The controller will automatically detect the battery voltage (12V eller 24V).
- Tilslut solpanelet: Connect the solar panel to the controller's solar panel terminals. Ensure correct polarity.
- Tilslut belastningen: Connect your DC load to the controller's load terminals. Ensure correct polarity.
Important: Always connect the battery first and disconnect the solar panel and load before disconnecting the battery.
Billede 5.1: Wiring sequence diagram. This illustration shows the correct order of connections: 1) Battery to controller, 2) Solar panel to controller, and 3) Load to controller. It emphasizes connecting the battery first.
6. Betjeningsvejledning
Once connected, the controller will begin operating automatically. The LCD display provides real-time information about your solar system.
6.1. LCD Display Information
The display typically shows:
- PV Voltage: Voltage fra solpanelet.
- Batteri Voltage: Nuværende batteri voltage.
- Load Status: Indicates if the load is on or off.
- Opladningsstatus: Shows if the battery is charging.
- Batteritype: (If adjustable)
- Temperatur: Controller's internal temperature.
6.2. Justering af indstillinger
Use the setting buttons (usually labeled with symbols like 'menu' and 'up/down' or 'enter' and 'return') to navigate through the display menus and adjust parameters such as:
- Battery type (e.g., Gel, Sealed, Flooded)
- Load control mode (e.g., 24-hour, dusk-to-dawn, timer)
- Overafladningsbeskyttelse voltage
- Flydende ladning voltage
Refer to the on-screen prompts for specific button functions and parameter adjustments.
7. Vedligeholdelse
- Regularly inspect all wiring for loose connections, corrosion, or damage.
- Hold controlleren ren og fri for støv og snavs. Brug en tør klud til rengøring.
- Sørg for tilstrækkelig ventilation omkring controlleren.
- Overvåg batterivolumentage and charge status periodically to ensure proper system function.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet display/Controlleren tænder ikke | Batteri ikke tilsluttet eller lav spændingtage; reversed polarity. | Kontroller batteriforbindelser og voltage. Ensure correct polarity. Charge battery if too low. |
| Batteriet oplades ikke | Solar panel not connected; insufficient sunlight; faulty solar panel; reversed polarity. | Check solar panel connections and polarity. Ensure adequate sunlight. Test solar panel output. |
| Indlæsningen virker ikke | Load not connected; reversed polarity; battery low; load protection activated. | Check load connections and polarity. Ensure battery is sufficiently charged. Check load settings on controller. |
| Overophedning | Dårlig ventilation; overdreven belastning. | Ensure controller is in a well-ventilated area. Reduce load if necessary. |
9. Garanti og support
For warranty information or technical support, please refer to the product packaging or contact your retailer. Keep your purchase receipt as proof of purchase.