Igloo MWC8988 Bundbetjent Vanddispenser Brugermanual

Indledning

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Igloo MWC8988 Bottom Loading Water Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Igloo MWC8988 is a freestanding water dispenser designed to provide cold, hot, and room temperature water. Its bottom-loading design eliminates the need for lifting heavy water bottles, concealing them neatly within the base of the unit. The dispenser features a compressor for efficient cooling and a heating element for hot water on demand.

Vigtige sikkerhedsoplysninger

To reduce the risk of injury or property damage, observe the following safety precautions:

• Slut altid dispenseren til en jordet stikkontakt. Brug ikke forlængerledninger.
• Hold dispenseren væk fra direkte sollys og varmekilder.
• Ensure proper ventilation around the unit. Maintain at least 4 inches (10 cm) clearance from walls.
• Do not operate the dispenser without a water bottle installed.
• Supervise children when they are near the dispenser, especially when dispensing hot water.
• Tag stikket ud af dispenseren, før du rengør eller udfører vedligeholdelse.
• Nedsænk ikke dispenseren, ledningen eller stikket i vand eller andre væsker.
• Hvis forsyningsledningen er beskadiget, skal den udskiftes af producenten, dennes serviceagent eller lignende kvalificerede personer for at undgå en fare.
• Dette apparat er beregnet til at blive brugt i husholdninger og lignende applikationer såsom personalekøkkenområder i butikker, kontorer og andre arbejdsmiljøer; gårde og af kunder i hoteller, moteller og andre boligtyper; miljøer af typen bed and breakfast; catering og lignende ikke-detailapplikationer.

Pakkens indhold

Ved udpakning skal du sørge for, at alle genstande er til stede og ubeskadigede:

• Igloo MWC8988 Bottom Loading Water Dispenser
• Water Probe Assembly
• Brugervejledning (dette dokument)

Produkt overview

Familiarize yourself with the components of your water dispenser.

Figur 1: Front view of the Igloo MWC8988 water dispenser with the bottom compartment door open, revealing a water bottle and the water probe assembly. The top features dispensing buttons and indicator lights for cooling, heating, and power.

Figur 2: Side view of the Igloo MWC8988 water dispenser highlighting key features such as bottom loading, freestanding design, compressor cooling, 420W heating power, and 100W cooling power.

Opsætningsinstruktioner

1. Unpack the Dispenser: Carefully remove all packaging materials. Place the dispenser on a flat, level surface.
2. Placering: Ensure the dispenser is placed in a cool, dry location, away from direct sunlight and heat sources. Allow at least 4 inches (10 cm) of clearance from walls for proper ventilation.
3. Installer vandflaske:
   • Open the bottom compartment door of the dispenser.
   • Remove the protective cap from a new 3 or 5-gallon water bottle.
   • Insert the water probe assembly into the opening of the water bottle. Ensure the probe is fully inserted and the bottle is sealed.
   • Slide the water bottle into the bottom compartment.
   • Luk kammerdøren forsvarligt.
4. Klargør systemet: Before plugging in the unit, place a cup under each dispenser faucet (hot, cold, room temperature) and press the buttons until water flows steadily from each. This removes air from the lines.
5. Tilslut: Sæt dispenseren i en jordet 120V AC stikkontakt.
6. Aktivér opvarmning/køling: The cooling and heating functions will begin automatically. Allow approximately 15-30 minutes for the water to reach optimal cold and hot temperatures. The indicator lights on the front panel will show when the desired temperatures are reached.

Betjeningsvejledning

Your Igloo MWC8988 dispenser offers three temperature options:

• Koldt vand: Press the blue button to dispense chilled water.
• Rumtemperatur vand: Press the green button to dispense water at ambient temperature.
• Varmt vand: For safety, the hot water faucet typically has a child-safety lock. Simultaneously press the red button and slide the safety lock (if present) to dispense hot water. Exercise caution as hot water can cause burns.

When the water bottle is empty, the "Bottle Empty" indicator light will illuminate. Replace the bottle following the "Install Water Bottle" steps in the Setup section.

Opretholdelse

Regelmæssig rengøring og vedligeholdelse sikrer optimal ydeevne og hygiejne.

1. Udvendig rengøring: Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
2. Rengøring af drypbakke: Drypbakken bør tømmes og rengøres regelmæssigt for at forhindre overløb og bakterievækst. Fjern bakken, vask den med mild sæbe og vand, skyl grundigt, og sæt den tilbage på plads.
3. Indvendig rengøring (afkalkning):
   • Tag stikket ud af dispenseren og fjern vandflasken.
   • Drain all water from the hot and cold tanks using the drain plugs located at the back of the unit (refer to your specific model's diagram for exact location).
   • Prepare a cleaning solution of 1 gallon (3.8 liters) of water mixed with 2 tablespoons of household bleach or a food-grade descaling solution.
   • Pour the cleaning solution into the water reservoir (where the probe usually sits).
   • Lad opløsningen sidde i 15-20 minutter.
   • Drain the solution completely from both hot and cold water faucets and the drain plugs.
   • Rinse the system thoroughly by filling the reservoir with clean water and draining it several times until no bleach odor remains.
   • Replace the drain plugs, install a new water bottle, and plug in the dispenser.

Fejlfinding

Specifikationer

Garanti og support

Specific warranty details and customer support contact information were not provided in the product data. For warranty claims or technical assistance, please refer to the documentation included with your purchase or visit the official Igloo webwebsted for de nyeste oplysninger.