Behringer EUROPOWER PMP2000D

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your Behringer EUROPOWER PMP2000D Powered Mixer. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its performance and longevity. The PMP2000D combines a powerful 2,000-Watt Class-D amplifier with a versatile 14-channel mixer, featuring premium mic preamps, a KLARK TEKNIK FX processor, and dual 9-band graphic EQs, making it an ideal solution for live sound applications.

Vigtige sikkerhedsinstruktioner

• Læs disse instruktioner.
• Gem disse instruktioner.
• Overhold alle advarsler.
• Følg alle instruktioner.
• Brug ikke dette apparat i nærheden af ​​vand.
• Rengør kun med en tør klud.
• Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
• Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det punkt, hvor de kommer ud af apparatet.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af ​​vognen/apparatet for at undgå skader ved at vælte.
• Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

Opsætning

Udpakning

Carefully unpack your EUROPOWER PMP2000D mixer and inspect it for any signs of damage that may have occurred during transit. Retain the original packing materials for future shipping or storage. Ensure all components listed in the packaging are present.

Placering

Place the mixer on a stable, flat surface. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation grilles on the sides or rear of the mixer.

Forbindelser

Before making any connections, ensure the mixer is powered off and unplugged from the mains.

Figure 1: Behringer EUROPOWER PMP2000D Powered Mixer with included XLR microphone cables.

• Strømtilslutning: Connect the supplied power cord to the AC IN socket on the rear panel of the mixer and then to a suitable mains outlet.
• Mikrofon-/instrumentindgange: Connect microphones to the XLR inputs (channels 1-9) and instruments or line-level devices to the 1/4" TRS inputs. For condenser microphones, ensure +48V phantom power is enabled (see Operating section).


Figure 2: An XLR microphone cable, commonly used for connecting microphones to the mixer.

• Højttalerudgange: Connect your passive loudspeakers to the OUTPUT A and OUTPUT B connectors on the rear panel. Ensure the impedance of your speakers matches the mixer's output requirements (typically 4-8 ohms).


Figure 3: Rear panel connections of the PMP2000D, including AC power input and speaker outputs.

• Hjælpeindgange/udgange: Use the 2-TRACK IN/OUT (RCA) for connecting external playback devices or recording outputs. The AUX IN can be used for additional line-level inputs.

Betjening af mixeren

Frontpanel overview

The front panel of the PMP2000D is divided into several sections: input channels, left/monitor section, right/main section, and the digital effects processor.

Figur 4: Detaljeret view of the PMP2000D front panel controls.

Kanalkontroller (kanal 1-14)

• GEVINST: Adjusts the input sensitivity for the microphone or line input. Set this to achieve a strong signal without clipping (indicated by the CLIP LED).
• PAD: Attenuates the input signal by 20 dB for very hot signals, preventing overload.
• LAVT SNIT: Activates a high-pass filter to remove unwanted low-frequency rumble (e.g., from stage vibrations or wind noise).
• EQ (HØJ, MELLEM, LAV): Three-band equalizer for shaping the tone of each channel. Adjust these controls to enhance or cut specific frequencies.
• FX: Sends a portion of the channel's signal to the internal digital effects processor.
• MON: Sends a portion of the channel's signal to the monitor mix output.
• NIVEAU: Adjusts the overall output level of the individual channel to the main mix.
• CLIP LED: Illuminates when the input signal is too high, indicating potential distortion. Reduce the GAIN control if this LED lights up frequently.

Hovedsektionens kontroller

• HOVEDNIVEAU: Styrer den samlede udgangsvolumen for hovedstereomixet.
• FX TIL HOVED: Adjusts the amount of the effects processor's output that is sent to the main mix.
• GRAFISK EQ: Dual 9-band graphic equalizers (one for Left/Monitor, one for Right/Main) allow for precise frequency shaping of the overall mix or monitor send.
• FANTOMKRAFT (+48V): Activates +48V phantom power for all XLR microphone inputs, required for condenser microphones. Ensure microphones are connected before activating.
• MAGT AMP KØRSELSVEJLEDNING: Selects the operating mode for the internal power amplivligere:
  • STEREOANLÆG: Left and Right channels are ampangives særskilt.
  • MONO: Begge amplifier channels output the summed mono signal.
  • BRO: Combines both amplifier channels for a single, higher-power mono output (requires specific speaker wiring).

Digital effektprocessor

The PMP2000D features a high-quality KLARK TEKNIK FX processor with 25 presets, including various reverbs, delays, chorus, flanger, phaser, pitch shifter, and multi-effects. Use the PROGRAM/PARAMETER knob to select effects and adjust their parameters. The FX MUTE button allows for quick muting of the effects return.

Opretholdelse

Rensning

To clean the mixer, use a soft, dry cloth. Do not use any liquid cleaners, solvents, or abrasive materials, as these can damage the finish and internal components.

Opbevaring

When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for protection during storage or transport.

Fejlfinding

Specifikationer

Garanti og support

This Behringer EUROPOWER PMP2000D Powered Mixer is covered by the manufacturer's warranty. For detailed warranty terms, conditions, and information on how to obtain technical support or service, please refer to the official Behringer website or contact their authorized customer service representatives. Keep your proof of purchase for warranty claims.