Kommerciel elektrisk 7 tommer hvid LED Low Profile Lys instruktionsmanual

Indledning

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Commercial Electric 7-inch White LED Low Profile Light, model 54663141. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This 7-inch LED flush mount fixture is designed for various indoor applications such as basements, garages, closets, and bathrooms. It features integrated LEDs for long-lasting illumination and is approved for damp steder.

Vigtige sikkerhedsoplysninger

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til sikringen eller strømafbryderen før installation eller servicering.
• ADVARSEL: Risk of fire. Use only in circuits rated for the fixture.
• Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
• Installer ikke dette armatur med våde hænder eller mens du står på våde eller våde stederamp overflader.
• Sørg for, at alle forbindelser er sikre og korrekte for at forhindre elektriske farer.
• This fixture is designed for indoor use and damp locations only. Do not expose to direct water spray.
• Forsøg ikke at ændre armaturet. Enhver ændring kan ugyldiggøre garantien og skabe sikkerhedsrisici.

Pakkens indhold

Carefully unpack your fixture and inspect for any damage. Ensure all parts are present before discarding packaging materials.

• LED Low Profile Lysarmatur (1)
• Mounting Hardware (Screws, Wire Nuts) (1 set)
• Instruktionsmanual (1)

Opsætning og installation

Nødvendige værktøjer: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Safety Glasses.

Trin 1: Forbered dig til installation

1. Sluk for strømmen: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the power completely. Verify power is off using a voltage tester.
2. Fjern eksisterende beslag: If replacing an existing fixture, carefully remove it and disconnect the wiring.

Figur 1: Øverst view of the Commercial Electric 7-inch White LED Low Profile Light fixture. This image shows the overall design of the light, which is round and white, with a low profile suitable for flush mounting.

Trin 2: Monter armaturbasen

3. Position the fixture: Align the fixture base with the junction box in the ceiling.
4. Fastgør basen: Use the provided mounting screws to securely attach the fixture base to the junction box. Ensure the fixture is flush against the ceiling.

Figur 2: Tilbage view of the LED light fixture, illustrating the pre-attached wiring for connection. The black and white wires are visible, ready for connection to the household electrical system.

Trin 3: Tilslutning af armaturet

5. Tilslut ledninger:
   • Tilslut sort ledningen fra armaturet til sort (varm) ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut hvid ledningen fra armaturet til hvid (neutral) ledningen fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut jord wire from the fixture (if present, typically bare copper or green) to the jord ledningen fra samledåsen.
   Ensure all wire nuts are securely tightened and no bare wire is exposed.

Figure 3: Image showing the light fixture with a label indicating "Brightness 800 lumens" and "LED Technology". This highlights the light output and the type of technology used in the fixture.

Trin 4: Fuldfør installationen

6. Tuck wires: Stik forsigtigt alle ledninger ind i samledåsen.
7. Attach diffuser: Secure the light diffuser or cover to the fixture base according to the manufacturer's design (e.g., twist-lock or snap-on).
8. Genopret strøm: Tænd for strømmen igen ved afbryderen eller sikringsboksen.
9. Test fixture: Turn on the light switch to ensure the fixture operates correctly.

Betjeningsvejledning

The Commercial Electric 7-inch LED Low Profile Light is designed for simple operation.

• Standarddrift: Once installed and powered, the light operates via a standard wall switch connected to the circuit.
• Dæmpningsfunktion: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed in your wall. Refer to your dimmer switch's instructions for proper operation.

Opretholdelse

The integrated LED technology in this fixture requires minimal maintenance.

• Rensning: Sørg for, at strømmen er slukket for at rengøre armaturet. Brug en blød, tør eller let fugtet klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektriske komponenter.
• lysdioder: The LEDs are integrated and not replaceable. The fixture is designed for a long operational life.

Fejlfinding

Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kundesupport.

Specifikationer

Garanti og support

For garantioplysninger eller teknisk support henvises til producentens officielle webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.

Producent: Commercial Electric