Indledning
The TOGUARD H50 Game and Wildlife Trail Camera is an advanced device designed for capturing high-quality images and videos of wildlife or for surveillance purposes. It features a rapid 0.5-second trigger speed, 120-degree wide-angle detection, and infrared night vision capabilities, ensuring comprehensive coverage day and night. This manual provides detailed instructions for setting up, operating, and maintaining your H50 trail camera.
Produktegenskaber
- Ultrahurtig udløserhastighed: Captures images in 0.5 seconds with a 1-second delay between triggers (for photos only) and up to 3 multi-shot photos.
- Billedbehandling af høj kvalitet: 12 Megapixel HD photos and Full HD 1080p video recording, providing clear color images during the day and black & white images at night.
- Wide Detection & Night Vision: Equipped with a 120° PIR motion detection angle, a 120° viewing angle lens, and 48 invisible 940nm infrared LEDs for a night vision range of up to 20 meters (65 feet).
- Brugervenlig betjening: Pre-configured settings for most wildlife applications. Simple setup requiring only AA batteries and a Micro SD card. Remote control for easy adjustments.
- Holdbart design: Robust, waterproof (IP54 rated) construction suitable for outdoor use over extended periods. Features a tripod thread and a strap mount for versatile placement.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- TOGUARD H50 Trail Camera
- Monteringsstrop
- Fjernbetjening
- USB kabel
- Brugermanual
Note: 4 or 8 AA 1.5V batteries and a Micro SD card (up to 32GB) are ikke inkluderet og skal købes separat.
Opsætning
- Batteri installation: Open the battery compartment. Insert 4 or 8 new 1.5V AA batteries, ensuring correct polarity. Close the compartment securely.
- Indsættelse af Micro SD-kort: Locate the Micro SD card slot. Insert a Micro SD card (Class 10 or higher, up to 32GB) with the contacts facing the correct direction until it clicks into place.
- Tænd: Switch the camera to the "ON" position. The camera will enter standby mode.
- Montering af kameraet:
- Remmontering: Thread the provided mounting strap through the slots on the back of the camera and secure it to a tree or pole.
- Stativmontering: Use the 1/4-inch threaded insert on the bottom of the camera to attach it to a tripod or other compatible mounting accessory.
- Initial Settings (Optional): While the camera has ideal default settings, you can use the remote control to access the menu and adjust parameters such as photo/video resolution, trigger interval, and multi-shot settings if desired.
Betjeningsvejledning
Once powered on and in standby mode, the H50 camera is ready to detect motion and capture media. The camera's PIR sensor will trigger recording when motion is detected within its range.
- Automatisk drift: The camera will automatically capture photos or videos based on your selected mode and settings when motion is detected.
- Adgang til indstillinger: Use the included remote control to navigate the camera's menu on the 2.0 TFT LCD screen. This allows you to change recording modes (photo, video, photo+video), resolution, video length, trigger interval, and other advanced settings.
- Viewing Medier: Til view captured images and videos, remove the Micro SD card from the camera and insert it into a compatible card reader connected to a computer or other viewing enhed.
- Lydoptagelse: Audio recording can be toggled on or off via the camera settings.
Opretholdelse
- Rensning: Gently wipe the camera lens and PIR sensor window with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Udskiftning af batteri: Replace batteries when the low battery indicator appears or when performance degrades. Always use fresh, high-quality AA batteries.
- SD-kortadministration: Regularly check the Micro SD card capacity. Format the card periodically to maintain optimal performance and prevent data corruption. Back up important files før formatering.
- Opbevaring: Når kameraet ikke er i brug i længere perioder, skal du fjerne batterierne og SD-kortet, og opbevare det et køligt og tørt sted.
- Vandtæthed: The camera is IP54 rated for water resistance, meaning it is protected against splashing water. However, avoid submerging the camera in water. Ensure all ports and compartments are securely closed.
Fejlfinding
| Problem | Mulig årsag/løsning |
|---|---|
| Kameraet tænder ikke. | Kontroller batteriinstallationen, og sørg for, at batterierne er friske. Bekræft, at tænd/sluk-knappen er i "ON"-positionen. |
| No images/videos captured. | Ensure the Micro SD card is inserted correctly and has sufficient free space. Check PIR sensitivity settings. Verify the camera is in an active mode (not just setup). |
| Dårlig billed-/videokvalitet om natten. | Ensure there are no obstructions in front of the IR LEDs. Check battery level, as low power can affect IR performance. |
| Camera triggers too often or not enough. | Adjust PIR sensitivity settings in the menu. Consider camera placement to avoid false triggers from swaying branches or direct sunlight. |
| Fjernbetjening virker ikke. | Ensure the remote's battery is functional. Point the remote directly at the camera's IR receiver. |
Specifikationer
| Feature | Detalje |
|---|---|
| Billedsensor | 12 megapixel farve CMOS |
| LCD Display | 2.0" TFT LCD Color |
| Video opløsning | 1080p/30fps, 720p/30fps, 640x480/30fps |
| Videolængde | 10s/30s/60s/90s (configurable) |
| Videoformat | AVI |
| Foto opløsning | 12MP/8MP/5MP |
| Multi-Shot | 1/3/6/9 Photos |
| Fotoformat | JPEG |
| PIR -detektionsvinkel | 120 grader |
| Linse Viewi vinkel | 120 degrees (F=3.1) |
| IR LEDs | 48 Invisible 940nm LEDs |
| PIR-detektionsafstand | Op til 20 meter (65 fod) |
| Udløserhastighed | 0.5 sekunder |
| Triggerinterval | 1 second ~ 30 minutes (default 1 sec) |
| Vandtæt niveau | IP54 |
| Opbevaring | Micro SD-kort op til 32GB (medfølger ikke) |
| Strømforsyning | 4/8 Pcs 1.5V AA batteries (not included), supports 5-9V DC power in (solar power compatible) |
| Driftstemperatur | -30 ° C ~ + 70 ° C (-22 ° F ~ + 158 ° F) |
| Sprogsupport | English, French, German, Spanish, Russian |
Garanti og support
TOGUARD products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official TOGUARD website. If you encounter any issues or require technical assistance, please contact TOGUARD customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
For de seneste supportoplysninger og ofte stillede spørgsmål, besøg venligst: www.toguard.cc
