Teknetics LIBERATOR metaldetektor brugermanual

Indledning

The Teknetics LIBERATOR is a high-performance metal detector designed for various treasure hunting and metal detecting applications. It features advanced capabilities such as V-Break variable tone breakpoint, pinpoint mode with depth indication, and computerized ground balancing. This manual provides essential information for setting up, operating, and maintaining your LIBERATOR metal detector to ensure optimal performance and longevity.

Sikkerhedsoplysninger

Always exercise caution when using the metal detector. Be aware of your surroundings, especially in areas with potential hazards like uneven terrain, sharp objects, or buried utilities. Do not operate the detector near active electrical lines or in hazardous environments. Always obtain permission before detecting on private property. When digging, use appropriate tools and be mindful of potential underground obstacles. Keep the device away from extreme temperatures and moisture to prevent damage.

Opsætning og montering

Proper assembly is crucial for the performance of your Teknetics LIBERATOR. Follow these steps carefully:

Attach the Searchcoil: Secure the 11-inch waterproof DD searchcoil to the lower stem using the provided bolt and washers. Ensure it is firmly attached but do not overtighten.
Saml akslen: Connect the lower, middle, and upper stems. Adjust the length of the shaft to a comfortable position that allows the searchcoil to be parallel to the ground when you are standing upright.
Monter kontrolhuset: Slide the control housing onto the upper stem. Ensure it is securely fastened.
Installer batterier: The LIBERATOR requires one 9V battery. Locate the battery compartment on the control housing, open it, and insert the battery, observing the correct polarity. Close the compartment securely.
Connect the Searchcoil Cable: Carefully wrap the searchcoil cable around the stem, leaving enough slack for the coil to pivot. Plug the cable connector into the corresponding port on the control housing. Ensure the connection is snug to prevent signal interference.

Image: The fully assembled Teknetics LIBERATOR metal detector, showing the control housing, adjustable shaft, and 11-inch DD searchcoil.

Betjeningsvejledning

Familiarize yourself with the control panel and its functions to effectively use your metal detector.

Image: Close-up of the Teknetics LIBERATOR control panel, displaying the LCD screen with target ID numbers, depth indicator, and various control buttons.

Grundlæggende betjening

Tænd/sluk: Press and hold the power button (usually marked with a power symbol) to turn the detector on or off.
Juster følsomhed: Use the sensitivity controls (often labeled SENS or with +/- buttons) to adjust the detector's sensitivity. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
Ground Grab (Computerized Ground Balancing): This feature automatically cancels out ground mineralization signals. Press the "Ground Grab" button and pump the searchcoil up and down over the ground until the ground balance reading stabilizes. This is crucial for stable operation.
Søgetilstande: The LIBERATOR offers 2 search modes. Consult the on-screen display or specific buttons to switch between modes, such as All-Metal or Discrimination modes.

Avancerede funktioner

Forskelsbehandling: This function allows the detector to ignore unwanted metals (like iron) and respond only to desired targets. Adjust the discrimination level using the DISC controls. The LIBERATOR supports motion and no-motion discrimination.
Variable Notching: Use the notching feature to selectively eliminate specific ranges of target IDs from detection. This is useful for ignoring common trash items.
V-Break (Variable Tone Breakpoint): This allows you to set a specific target ID point where the audio tone changes. For example, you can set it so that iron produces a low tone, and non-ferrous metals produce a higher tone.
Target-ID Numbers (1-99): The large 2-digit numeric display provides a Target-ID number, helping you identify the probable type of metal detected before digging. Higher numbers generally indicate more conductive metals.
Pinpoint Mode with Depth Indicator: Press the "PP" (Pinpoint) button to activate pinpoint mode. This helps you narrow down the exact location of a target and provides an estimated depth reading on the display.
4-Tone Audio-ID: The detector provides distinct audio tones for different types of metals, aiding in target identification without constantly looking at the display.

Opretholdelse

Proper maintenance will extend the life and performance of your Teknetics LIBERATOR.

Rensning: Efter hver brug skal søgespolen og stilken tørres af med enamp cloth to remove dirt and debris. The 11-inch DD searchcoil is waterproof and can be rinsed with fresh water, but ensure the control housing is kept dry.
Batteripleje: Always remove the 9V battery if the detector will not be used for an extended period to prevent leakage and damage to the electronics. Store batteries in a cool, dry place.
Opbevaring: Store the detector in a dry, temperate environment. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
Kabelinspektion: Periodically check the searchcoil cable for any signs of wear, cuts, or damage. Ensure the connector is clean and free of corrosion.

Fejlfinding

If you encounter issues with your Teknetics LIBERATOR, try these common troubleshooting steps:

Problem	Mulig årsag	Løsning
No power or intermittent power	Dead or improperly installed battery; loose cable connection.	Replace the 9V battery with a fresh one. Ensure the battery is inserted with correct polarity. Check that the searchcoil cable is securely connected to the control housing.
Excessive false signals or chatter	High sensitivity setting; improper ground balance; electromagnetic interference.	Reduce the sensitivity setting. Perform a proper Ground Grab procedure. Move away from power lines, cell phones, or other electronic devices.
Dårlig målidentifikation eller dybde	Incorrect discrimination settings; highly mineralized ground; coil not parallel to ground.	Adjust discrimination settings to allow desired targets. Re-ground balance. Ensure the searchcoil is swept parallel to the ground surface.
No audio response	Volume too low; faulty headphones (if used); internal issue.	Increase the volume. Test with different headphones or without headphones. If the problem persists, contact customer support.

Specifikationer

Model: LIBERATØR
Mærke: Teknetics
Fabrikant: First Texas Products, LLC
Farve: Sort
Materiale: Metal
Skærmtype: LCD (Large 2-digit numeric Target-ID numbers, 1-99)
Søgespole: 11-inch waterproof DD searchcoil
Strømkilde: Batteridrevet
Batterier påkrævet: 1 x 9V batteri (medfølger ikke)
Søgetilstande: 2 (e.g., All-Metal, Discrimination)
Lydtoner: 4-Tone Audio-ID
Jordbalance: Ground Grab (Computerized Ground Balancing)
Forskelsbehandling: V-Break, variable tone breakpoint; Pinpoint mode with depth indicator, Discrimination (motion, no motion); Variable notching
Produktdimensioner: 73.66 x 27.94 x 17.78 cm (assembled, approximate)
Varens vægt: 1.18 kg (ca.)

Garanti og support

For warranty information, technical support, or service inquiries regarding your Teknetics LIBERATOR metal detector, please contact the manufacturer directly.

Fabrikant: First Texas Products, LLC

Se produktemballagen eller producentens officielle webwebstedet for de seneste kontaktoplysninger og garantivilkår.

	Teknetics T2 Special Edition Professionel Metaldetektor: Omfattende betjeningsvejledning Oplev Teknetics T2 Special Edition, en højtydende professionel metaldetektor. Denne manual dækker dens avancerede funktioner, VLF Induction Balance-teknologi, brugervenlighed og teknikker til møntjagt, relikviejagt og guldprospektering.
	Teknetics Omega 8000 metaldetektor brugermanual Omfattende brugermanual til Teknetics Omega 8000 metaldetektoren. Dækker samling, betjening, kontroller, funktioner som jordbalancering og diskrimination, søgeteknikker, fejlfinding, garanti og tilbehør. Lær, hvordan du bruger din metaldetektor effektivt til skattejagt.
	Teknetics Omega 8500 metaldetektor brugermanual Omfattende brugermanual til Teknetics Omega 8500 metaldetektoren, der dækker samling, betjening, funktioner, fejlfinding og vedligeholdelse. Lær, hvordan du bruger din metaldetektor effektivt til skattejagt.
	Teknetics T2+ metaldetektor: Omfattende betjeningsvejledning og vejledning Detaljeret betjeningsvejledning og vejledning til den professionelle Teknetics T2+ metaldetektor, der dækker samling, funktioner, betjeningselementer, søgeteknikker og detektionsaktiviteter. Lær, hvordan du bruger din metaldetektor til møntjagt, relikviejagt og guldprospektering.
	Teknetics T2 Special Edition metaldetektor: Omfattende betjeningsvejledning og vejledning Udforsk Teknetics T2 Special Edition Professional metaldetektoren med denne omfattende betjeningsmanual og vejledning. Lær om dens funktioner, samling, betjening, søgeteknikker og specifikke detektionsaktiviteter som møntjagt, relikviejagt og guldprospektering.
	Teknetics T2 metaldetektor: Omfattende betjeningsvejledning Denne omfattende betjeningsmanual indeholder detaljerede instruktioner og vejledning til Teknetics T2 metaldetektoren, et højtydende værktøj til møntjagt, relikviejagt og guldprospektering. Lær om dens funktioner, betjeningselementer og teknikker til optimal metaldetektion.