1. Introduktion
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your Prity K1CPW8 cast iron wood-burning stove with an integrated water exchanger. Please read this manual thoroughly before installation and use.
1.1 Produkt overview
The Prity K1CPW8 is a highly efficient wood-burning stove designed for heating living spaces and integrating with a central heating system via its built-in water exchanger. It features a durable cast iron construction, a ceramic heat-resistant glass in the combustion chamber, and a secondary door for convenience.
Figur 1: Forside view of the Prity K1CPW8 Cast Iron Stove, showing the combustion chamber with visible flames and the lower compartment.
1.2 Sikkerhedsadvarsler
- Brandfare: Always maintain safe distances from combustible materials. Refer to the specifications section for minimum clearances.
- Carbonmonoxid: Ensure proper ventilation and chimney draft to prevent carbon monoxide buildup. Install carbon monoxide detectors.
- Varme overflader: The stove surfaces become extremely hot during operation. Use protective gloves when handling parts like the door handle. Keep children and pets away.
- Brændstoftype: Only use dry wood as fuel. Do not burn plastics, treated wood, or other unsuitable materials.
- Vandsystem: Ensure the water exchanger system is properly installed, filled, and vented before operating the stove. Overpressure can be dangerous.
2. Opsætning og installation
Proper installation is crucial for the safe and efficient operation of your stove. It is highly recommended that installation be performed by a qualified professional.
2.1 Udpakning og inspektion
Carefully unpack the stove and inspect it for any damage that may have occurred during transit. Report any damage to your supplier immediately.
2.2 Placering og rydninger
Choose a suitable location on a non-combustible floor. Ensure adequate clearance from walls, furniture, and other combustible materials. Refer to the technical specifications for exact minimum distances.
- Minimum afstand til brændbare materialer:
- Bag: 400 mm
- Side: 400 mm
- Front: 800 mm (within the radiant area of the glass)
Figure 2: The Prity K1CPW8 stove positioned in a living room, demonstrating typical installation with a visible chimney pipe and wood storage.
2.3 Skorstenstilslutning
Connect the stove to a suitable, properly sized chimney flue. Ensure all connections are sealed and airtight to prevent smoke leakage and ensure proper draft. The chimney must be clean and free of obstructions.
Figur 3: Øverst view of the Prity K1CPW8 stove, showing the circular opening for chimney connection and a removable cover for a cooking plate.
2.4 Water Exchanger Connection
The integrated water exchanger requires connection to your central heating system. This must be done by a certified plumber. Ensure the system includes an expansion tank, circulating pump, safety valve, and pressure gauge. Fill the system with water and bleed all air before operation.
Figur 4: Bagside view of the Prity K1CPW8 stove, highlighting the two pipe connections for the integrated water exchanger system.
3. Betjeningsvejledning
3.1 Brændstoftype
Only use dry, seasoned firewood. Wood moisture content should be 16% ± 4% according to EN 13240:2006. Do not use wet wood, treated wood, coal, or any other combustible materials not specified for this stove.
3.2 Optænding af ovnen
- Open the primary air intake fully.
- Place crumpled paper or firelighters at the bottom of the combustion chamber.
- Add a small amount of kindling on top of the paper/firelighters.
- Tænd papiret/optændingsblæksprutterne.
- Once the kindling is burning well, gradually add larger pieces of dry firewood.
- Luk døren forsvarligt.
3.3 Temperaturkontrol
Adjust the primary and secondary air intakes to control the burn rate and heat output. Closing the air intakes will reduce the burn rate, while opening them will increase it. Avoid over-firing the stove, as this can damage the unit and lead to unsafe conditions.
Note: The manufacturer recommends not overloading the stove with too much wood to avoid high temperatures at the boiler outlet, especially if not connected to a regulated system.
4. Vedligeholdelse
Regular maintenance ensures the longevity and safe operation of your Prity K1CPW8 stove.
4.1 Askefjernelse
Remove ash regularly from the ash pan located below the cast iron grate. Do not allow ash to build up and block the air intake. Always ensure ashes are cold before disposal.
4.2 Glasrengøring
The ceramic glass in the combustion chamber may accumulate soot. Clean it when the stove is cold using a specialized glass cleaner for wood stoves or a damp cloth dipped in ash. Avoid abrasive cleaners.
4.3 Rengøring af skorsten og røgrør
Have your chimney and flue pipes inspected and cleaned by a certified chimney sweep at least once a year, or more frequently depending on usage. This prevents creosote buildup, which can lead to chimney fires.
4.4 Generelt eftersyn
Periodically check all seals, gaskets, and connections for wear and tear. Replace any damaged parts immediately to maintain efficiency and safety.
5. Fejlfinding
This section addresses common issues you might encounter with your stove.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Røg ind i rummet | Poor chimney draft, blocked flue, downdraft, door not sealed. | Check chimney for blockages, ensure proper ventilation, inspect door seals, pre-heat flue. |
| Stove not heating efficiently | Wet wood, insufficient air supply, excessive ash buildup, chimney issues. | Use dry wood, open air intakes, remove ash, check chimney. |
| Glas bliver hurtigt sort | Wet wood, low burning temperature, insufficient air wash. | Use dry wood, increase burn rate, ensure air wash vents are clear. |
| Water system not heating | Air in system, pump malfunction, insufficient heat from stove. | Bleed air from system, check pump, ensure stove is burning at optimal temperature. Consult a plumber. |
6. Tekniske specifikationer
Below are the key technical specifications for the Prity K1CPW8 stove.
| Attribut | Værdi |
|---|---|
| Mærke | Prity |
| Model | K1CPW8 |
| Farve | Graphic Black |
| Materiale | Støbejern |
| Produktmål (L x B x H) | 46 x 44 x 76 cm |
| Varens vægt | 74 kilo (163.14 pund) |
| Nominel varmeeffekt | 13.1 kW |
| Rumvarmeeffekt | 6.1 kW |
| Udgang for vandopvarmning | 7.0 kW |
| Effektivitet | 77.4% (High Efficiency) |
| Maksimalt arbejdstryk (vand) | 1.25 bar |
| Ventilationstype | Direkte udluftning |
| Montering påkrævet | Ingen |
| Minimum Clearances (Rear) | 400 mm |
| Minimum Clearances (Side) | 400 mm |
| Minimum Clearances (Front) | 800 mm |
Figure 5: Energy efficiency label for Prity K1CPW8, indicating an A-class rating with 6.0 kW room heating and 7.0 kW water heating output.
Figure 6: Declaration of Performance document for the Prity K1CPW8, outlining compliance with EU regulations and technical specifications.
7. Garanti og support
For garantioplysninger henvises til de vilkår og betingelser, som din forhandler oplyste på købstidspunktet. Gem din købsbevis til eventuelle garantikrav.
For technical support or spare parts inquiries, please contact your authorized Prity dealer or the manufacturer directly. While specific spare parts availability information is not always provided, your dealer should be able to assist with service and parts.
Figure 7: Product label with barcode and manufacturer details, including "Prity 95 Ltd Bulgaria" and model K1CPW8.
