Progress Lighting P5015-09 Transitional Pendel med Fire Lys Brugermanual

Indledning

Thank you for choosing the Progress Lighting P5015-09 Transitional Four Light Pendant. This fixture features a sleek metal frame supporting a white linen drum shade, designed to complement various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your new pendant light.

This image displays the Progress Lighting P5015-09 pendant light, featuring a brushed nickel finish frame and a white linen drum shade. The fixture is suspended by a central rod and supported by thin cables.

Vigtige sikkerhedsoplysninger

Please read all instructions carefully before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.

• ADVARSEL: For at undgå elektrisk stød skal strømmen afbrydes ved afbryderen eller sikringsboksen før installation.
• Al ledningsføring skal være i overensstemmelse med nationale og lokale el-forskrifter. Hvis du er usikker på ledningsføringen, skal du kontakte en kvalificeret elektriker.
• Sørg for, at armaturet er korrekt jordet.
• Overskrid ikke det maksimale wattage specificeret for pærerne.
• Håndter glaskomponenter forsigtigt for at forhindre brud.
• Hold brandfarlige materialer væk fra lysarmaturet.

Pakkens indhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture.

• Pendant Light Fixture Assembly (Metal Frame, Shade, Diffuser)
• Monteringssæt (baldakin, monteringsplade, skruer, trådmøtrikker)
• Hanging Stems: One (1) 6-inch stem, Four (4) 12-inch stems
• Chain: Six (6) links for sloped ceiling applications
• Instruktionsmanual

This diagram illustrates the various stem lengths (one 6-inch, four 12-inch) and six chain links provided for adjustable hanging heights and sloped ceiling installations.

Opsætning og installation

Professional installation is recommended for optimal safety and performance. Ensure power is disconnected at the circuit breaker before proceeding.

1. Forbered til installation

1. Sluk for strømmen ved hovedafbryderen.
2. Carefully unpack all components and inspect for damage.
3. Determine the desired hanging height and assemble the appropriate combination of stems. For sloped ceilings, use the provided chain links.

2. Monter armaturet

4. Attach the mounting plate to the junction box in the ceiling using the provided screws.
5. Thread the fixture wires through the center hole of the mounting plate and canopy.

3. Ledningsforbindelser

6. Connect the fixture's bare copper ground wire to the house's ground wire (usually bare copper or green) using a wire nut.
7. Tilslut armaturets hvide ledning til husets hvide (neutrale) ledning ved hjælp af en trådmøtrik.
8. Tilslut armaturets sorte ledning til husets sorte (varme) ledning ved hjælp af en trådmøtrik.
9. Stik forsigtigt alle ledninger ind i samledåsen.

4. Slutsamling

9. Secure the canopy to the mounting plate.
10. Install the light bulbs (not included) into the sockets. Refer to the 'Operating Instructions' section for bulb type.
11. Attach the glass diffuser and linen shade to the fixture according to the assembly diagram (if applicable).

The pendant light is shown installed above a dining table in a modern room, illustrating its scale and aesthetic integration within a living space.

Betjeningsvejledning

Bulb Information

• This fixture uses an E26 (Mellem base) pære.
• We recommend a frosted A19 light bulb with this fixture for optimal light diffusion.
• For cost and energy saving benefits, choose LED bulbs.
• Overskrid ikke det maksimale wattage rating for the fixture.

Dæmpningsinformation

This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs. Ensure both the dimmer switch and the bulbs are rated for dimming functionality.

This graphic specifies that the fixture uses an E26 (Medium Base) bulb, recommends frosted A19 bulbs, and confirms dimmable functionality with compatible wall dimmers and bulbs.

Tænder

Once installation is complete and all connections are secure, restore power at the circuit breaker. Operate the light using a standard wall switch or compatible dimmer switch.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din pendellampes levetid og udseende.

• Rensning: Turn off power and allow the fixture to cool before cleaning. Wipe the metal surfaces with a soft, dry cloth. For the linen shade, use a soft brush or vacuum with a brush attachment to remove dust. The glass diffuser can be cleaned with a mild glass cleaner. Avoid abrasive cleaners or solvents.
• Udskiftning af pære: Ensure power is off and bulbs are cool before replacing. Screw in new bulbs firmly but do not overtighten.
• Inspektion: Periodically check for loose connections or signs of wear. If any issues are found, consult a qualified electrician.

En detaljeret view highlighting the quality and finish of the metal components that form the structure of the pendant light.

Fejlfinding

If you experience issues with your pendant light, refer to the following common problems and solutions:

Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte en kvalificeret elektriker eller Progress Lightings kundesupport.

Specifikationer

A technical drawing indicating the overall height of 15-7/8 inches and a diameter of 24 inches for the pendant light fixture.

Garanti og support

Garantioplysninger

Denne Progress Lighting-armatur leveres med en 1 års garanti fra købsdatoen, dækker defekter i materialer og udførelse. Gem venligst din købsbevis i tilfælde af garantikrav.

Kundesupport

For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer service. Refer to the official Progress Lighting webhjemmeside for aktuelle kontaktoplysninger.