Indledning
This manual provides essential instructions for the safe and effective use of your Park Tool TWS-3 Torque Type Wrench Set. Please read this manual thoroughly before using the tool to ensure proper operation and to prevent damage to components or injury.
Produkt overview
The Park Tool TWS-3 is a Y-type wrench designed for Torx fasteners, commonly found on bicycle components. It features three distinct Torx head sizes for versatility in various applications.
- T10 Torx Head: For smaller fasteners.
- T25 Torx Head: A common size for disc brake rotors, stem bolts, and other bicycle components.
- T30 Torx Head: For larger fasteners requiring more torque.
Figure 1: Park Tool TWS-3 Torque Type Wrench Set. This image displays the green Y-shaped handle with three black Torx bits extending from each arm, labeled T10, T25, and T30.
Opsætning
The Park Tool TWS-3 is ready for immediate use. No assembly is required. Before each use, inspect the wrench for any signs of damage or wear. Ensure the Torx heads are clean and free of debris to ensure proper engagement with fasteners.
Betjeningsvejledning
- Vælg den rigtige størrelse: Identify the appropriate Torx head size (T10, T25, or T30) that matches the fastener you intend to work with. Using the incorrect size can damage both the fastener and the tool.
- Insert Wrench: Firmly insert the selected Torx head into the fastener, ensuring full engagement. The wrench should sit snugly in the fastener head.
- Påfør moment: Rotate the wrench clockwise to tighten or counter-clockwise to loosen. Apply steady, controlled pressure. Avoid sudden jerking motions.
- Observe Torque Specifications: When tightening, always refer to the component manufacturer's recommended torque specifications. While this wrench provides leverage, it is not a torque-measuring device. Overtightening can strip threads or damage components.
- Note on Twist Prevention Screws: This tool is not designed for use with twist prevention screws. Attempting to use it on such fasteners may result in damage to the fastener or the tool.
Opretholdelse
- Rensning: After each use, wipe the wrench clean with a dry cloth to remove dirt, grease, or grime. For stubborn residue, a mild degreaser can be used, followed by thorough drying.
- Opbevaring: Store the wrench in a dry environment, away from direct sunlight and extreme temperatures. Proper storage helps prevent corrosion and extends the tool's lifespan.
- Inspektion: Periodically inspect the Torx heads for signs of wear, rounding, or damage. A worn tool can damage fasteners. Replace the tool if significant wear is observed.
Fejlfinding
Most issues with a simple hand tool like the TWS-3 are related to improper use or wear. Consider the following:
- Fastener Slipping: Ensure the correct Torx size is selected and fully engaged. If the fastener head is stripped, the wrench will not be able to grip it.
- Værktøjsskade: If the wrench head appears rounded or bent, it indicates excessive force or improper use. Replace the tool to prevent damage to fasteners.
- Stuck Fastener: For very tight fasteners, apply penetrating oil and allow it to soak. Ensure you are turning in the correct direction (lefty-loosey, righty-tighty).
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | TWS-3 |
| Mærke | Parkeringsværktøj |
| Torx Sizes | T10, T25, T30 |
| Materiale | Værktøjsstål |
| Farve | Grøn/sort |
| Varelængde | 5 tommer |
| Varens vægt | 0.01 ounce |
| UPC | 763477008862 |
Garanti og support
For warranty information or technical support regarding your Park Tool TWS-3 Torque Type Wrench Set, please refer to the official Park Tool webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
Note: This manual is for informational purposes only. Park Tool reserves the right to make changes to products and specifications at any time without notice.
