Philips Lighting 1735093PN

Philips 1735093PN MOONSHINE Udendørs loftslampe Brugermanual

1. Introduktion

1.1 Produkt overview

Thank you for choosing the Philips 1735093PN MOONSHINE Outdoor Ceiling Light. This luminaire is designed to provide effective and stylish outdoor illumination. Constructed from high-quality aluminum and synthetic materials, it features a durable anthracite finish and is built to withstand various weather conditions.

The MOONSHINE ceiling light is specifically engineered for garden and patio environments, offering easy installation and reliable performance. It utilizes two E27 type bulbs (not included) to deliver bright, diffused light.

Philips MOONSHINE Outdoor Ceiling Light, front view

Billede 1.1: Forside view of the Philips MOONSHINE Outdoor Ceiling Light.

1.2 Sikkerhedsoplysninger

  • Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter.
  • Sørg for, at monteringsfladen kan bære armaturets vægt.
  • Overskrid ikke det maksimale wattage specified for the E27 bulb sockets.
  • This product is rated IP44 for outdoor use, meaning it is protected against solid objects larger than 1mm and splashing water from any direction.
  • Modificer ikke produktet på nogen måde.

2. Pakkens indhold

Please check that all components are present and undamaged before proceeding with installation. The package should contain:

  • Philips MOONSHINE Outdoor Ceiling Light fixture (1 unit)
  • Monteringsudstyr (skruer, vægdyvler)
  • Instruktionsmanual

Note: E27 bulbs are not included and must be purchased separately.

3. Opsætning og installation

Follow these steps for safe and correct installation of your Philips MOONSHINE Outdoor Ceiling Light.

3.1 Nødvendigt værktøj

  • Skruetrækker (Phillips hoved)
  • Bor med et passende bor til vægdyvler
  • Afisoleringstænger
  • Blyant
  • Målebånd

3.2 Installationstrin

  1. Strømafbrydelse: Before starting, ensure the power supply to the installation area is switched off at the main circuit breaker or fuse box.
  2. Marking Mounting Points: Hold the fixture's mounting bracket against the desired ceiling or wall location. Use a pencil to mark the drilling points.
  3. Bore huller: Drill holes at the marked points. Insert the provided wall plugs into the drilled holes.
  4. Monteringsbeslag: Fastgør monteringsbeslaget til loftet/væggen med de medfølgende skruer.
  5. Ledningsføring: Connect the electrical wires from the ceiling/wall to the terminal block on the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. All connections must be secure.
  6. Fastgørelse af beslag: Carefully attach the main light fixture body to the mounted bracket, ensuring all wires are tucked safely inside and not pinched. Secure the fixture using the designated screws, typically two screws on the sides.
  7. Installation af pærer: Insert two E27 bulbs (max 14W LED or equivalent) into the sockets. Do not overtighten.
  8. Strømgendannelse: Once the fixture is securely installed and bulbs are in place, restore power at the main circuit breaker.
Philips MOONSHINE Outdoor Ceiling Light installed on a wooden wall

Billede 3.1: Eks.ample of the Philips MOONSHINE Outdoor Ceiling Light installed on an exterior wall.

4. Betjeningsvejledning

The Philips MOONSHINE Outdoor Ceiling Light operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the connected wall switch to turn the light ON or OFF.

  • Ensure compatible E27 bulbs are installed.
  • The light is designed for continuous outdoor use within its specified IP rating.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din lampes levetid og optimale ydeevne.

5.1 Rengøring

  • Afbryd altid strømmen før rengøring.
  • Tør armaturet af med en blød kludamp klæde.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and synthetic materials.
  • Sørg for, at armaturet er helt tørt, før du genopretter strømmen.

5.2 Udskiftning af pære

  • Afbryd strømmen ved hovedafbryderen.
  • Carefully unscrew the two side screws to open the fixture.
  • Unscrew the old E27 bulb(s) counter-clockwise.
  • Screw in new E27 bulb(s) clockwise, ensuring they are compatible and do not exceed the maximum wattage (14W LED or equivalent).
  • Close the fixture and secure the side screws.
  • Gendan strømmen.

6. Fejlfinding

Hvis du støder på problemer med din lampe, kan du se følgende almindelige problemer og løsninger:

ProblemMulig årsagLøsning
Lyset tændes ikke.Ingen strømforsyning.Check circuit breaker/fuse. Ensure wall switch is ON.
Løs ledningsforbindelse.Disconnect power and check wiring connections. Consult a qualified electrician.
Faulty bulb(s).Replace bulb(s) with new, compatible E27 bulbs.
Lyset er svagt eller flimrer.Forkert pære wattage.Ensure bulbs are of the correct wattage and type (E27).
Løs pæreforbindelse.Disconnect power and gently tighten bulb(s).

If the problem persists after attempting these solutions, please contact Philips Lighting customer support or a qualified electrician.

7. Specifikationer

FeatureSpecifikation
MærkePhilips belysning
Modelnummer1735093PN
StilMoonshine
FarveAntracit
MaterialeAluminum, Synthetic Materials
Produktmål (L x B x H)26 x 26 x 8.1 cm (10.24 x 10.24 x 3.19 tommer)
Varens vægt933 gram
IP-vurderingIP44
Antal pærer2
Cap TypeE27
Max Wattage pr. pære14 Watts (LED equivalent)
Voltage230 volt
Lysstrøm2000 Lumen (total, with appropriate bulbs)
Specifikke anvendelserHave, gårdhave
InstallationstypeLoftmontering
Diagram showing dimensions of Philips MOONSHINE Outdoor Ceiling Light

Image 7.1: Dimensional drawing of the Philips MOONSHINE Outdoor Ceiling Light (dimensions in mm).

8. Garanti og support

This Philips product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Philips Lighting webhjemmeside for detaljerede garantivilkår.

For technical assistance, troubleshooting not covered in this manual, or to inquire about spare parts, please contact Philips Lighting customer support. Contact information can typically be found on the Philips Lighting webwebstedet eller på din produktemballage.

Online support: www.philips.com/lighting

Relaterede dokumenter - 1735093PN

Preview Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: Datablad for højtydende LED-armaturer
Teknisk datablad for Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, en højeffektiv LED-armatur med avancerede funktioner, specifikationer og anvendelsesdata. Indeholder detaljer om ydeevne, mekaniske og elektriske detaljer.
Preview Philips TubePoint: Højtydende armaturserie til trafikkunneler
Udforsk Philips TubePoint-armaturserien, der er udviklet til effektive, omkostningseffektive og pålidelige belysningsløsninger i trafikkunneler. Denne produktseriebrochure beskriver funktioner, fordele, tekniske specifikationer og modelvariationer for optimal tunnelbelysning.
Preview Philips belysningskvalitetsmanual
Denne kvalitetsmanual beskriver Philips Lighting Quality System og beskriver dets processer, standarder og engagement i kvalitet. Den fungerer som et supplement til Philips Lighting Business System og sikrer, at produkter og tjenester opfylder ISO 9001-kravene og kundernes forventninger.
Preview Philips CoreLine vægmonterede LED-armaturer
Oplev Philips CoreLine vægmonterede LED-armatur, en innovativ, brugervenlig og højkvalitets belysningsløsning til forskellige anvendelser som gange, trapper og offentlige indgange. Denne brochure beskriver dens funktioner, fordele, tekniske specifikationer og produktinformation.
Preview Philips OccuSwitch LRM1070/00 PIR Anwesenheitssensor databladt
datablade for den intelligente Philips OccuSwitch LRM1070/00 Anwesenheitssensor. Bietet PIR-teknologi, tageslichtabhängige Schaltung, integriertes Relais und Deckeneinbau. Enthält technische Spezifikationen und Abmessungen.
Preview Philips OccuSwitch LRM1070/00 Bevægelsesdetektor og lysafbryder
Oplev Philips OccuSwitch LRM1070/00, en intelligent bevægelsesdetektor med en integreret kontakt, der er designet til at spare energi ved automatisk at slukke lyset i ubeboede rum. Den er ideel til rum på op til 25 m², håndterer belastninger på op til 6 A og er nem at installere med et aftageligt stik.