Indledning
Thank you for choosing the Hoffen Adjustable Fold-up Cup Holder. This product is designed for convenient and secure storage of beverages in marine, automotive, and recreational vehicle environments. Constructed from high-quality 304 stainless steel, it offers durability and corrosion resistance, making it ideal for harsh conditions. Its space-saving folding design and adjustable retainer arms accommodate various cup and mug sizes.
Sikkerhedsoplysninger
- Ensure the cup holder is securely mounted to a stable surface before use.
- Do not overload the cup holder beyond its intended capacity.
- Avoid placing extremely hot liquids in the holder without proper insulation, as the stainless steel can conduct heat.
- Keep mounting hardware out of reach of children.
- Regularly inspect the cup holder for any signs of wear or damage. Discontinue use if damaged.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x Hoffen 304 Adjustable Stainless Steel Cup Holder
- 4 x Stainless Steel Mounting Screws
Image: The Hoffen adjustable cup holder shown with the included stainless steel mounting screws in a small plastic bag.
Specifikationer
| Feature | Detalje |
|---|---|
| Materiale | 304 rustfrit stål |
| Farve | Sølv |
| Mount Base Length (closed) | 4 tommer (102 mm) |
| Mount Base Width (closed) | 3-7/8 tommer (94.5 mm) |
| Depth (closed) | 1 tomme (25.4 mm) |
| Depth (open) | 4-1/4 tommer (102 mm) |
| Adjustable Retainer Arms Opening | 1 inch to 3-1/4 inches diameter |
| Vægt (pr. Enhed) | 0.82 pund (0.37 kg) |
| Pakkedimensioner | 4.8 x 4.6 x 1.3 tommer |
| Fabrikant | Baisen |
Image: Detailed dimensions of the cup holder, illustrating its compact folded size and open dimensions.
Opsætning og installation
The Hoffen cup holder is designed for easy surface mounting. Follow these steps for proper installation:
- Vælg en placering: Select a flat, stable surface for mounting. Ensure there is enough clearance for the cup holder to fold open and close without obstruction. Consider the type of beverage containers you will be using to ensure they fit comfortably when the holder is open.
- Marker monteringspunkter: Hold the cup holder in the desired mounting position. Use a pencil or marker to mark the locations for the four mounting screws through the pre-drilled holes on the base.
- Bor forboringshuller (valgfrit, men anbefalet): Depending on the mounting surface material, it may be beneficial to drill small pilot holes at the marked locations. Use a drill bit slightly smaller than the diameter of the mounting screws to prevent splitting or cracking the surface.
- Fastgør kopholderen: Align the cup holder with the marked or drilled holes. Insert the provided stainless steel screws into the holes and tighten them securely with a screwdriver. Do not overtighten, as this can strip the screws or damage the mounting surface.
- Test stabilitet: Once mounted, gently pull on the cup holder to ensure it is firmly attached and does not wobble.
Image: Visual guide showing the cup holder's adjustable arms and its simple mounting process.
Image: Underside of the cup holder, highlighting the screw mounting points.
Betjeningsvejledning
Using your Hoffen Adjustable Fold-up Cup Holder is straightforward:
- For at åbne: Gently pull the front panel of the cup holder downwards until it locks into the open position. The retainer arms will extend upwards.
- To Place a Beverage: Insert your can, cup, cozy, or mug into the holder. The molded silicone retainer arms will adjust to securely grip the container, accommodating diameters from 1 inch to 3-1/4 inches.
- To Close/Fold Up: When not in use, lift the front panel of the cup holder upwards until it folds flat against the mounting surface. This space-saving design keeps the area clear.
Image: The cup holder in use, holding a standard beverage can.
Billede: Eksamples of different cup and bottle sizes that fit the holder.
Image: Progression of the cup holder from open to folded positions.
Opretholdelse
To ensure the longevity and appearance of your stainless steel cup holder, follow these simple maintenance guidelines:
- Rensning: Wipe the cup holder regularly with a soft, damp cloth. For stubborn spots, use a mild soap solution and rinse thoroughly. Dry immediately with a clean, soft cloth to prevent water spots.
- Undgå skrappe rengøringsmidler: Do not use abrasive cleaners, steel wool, or harsh chemicals (e.g., bleach, ammonia-based cleaners) as they can scratch or damage the stainless steel finish.
- Korrosionsforebyggelse: While 304 stainless steel is highly corrosion-resistant, prolonged exposure to saltwater or corrosive substances without cleaning can lead to surface discoloration. Rinse with fresh water after marine use.
- Smøring: Periodically, a small amount of silicone-based lubricant can be applied to the hinge points to ensure smooth folding action.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Cup holder feels loose after installation. | Screws are not fully tightened or mounting surface is unstable. | Ensure all mounting screws are securely tightened. If the surface is unstable, consider reinforcing it or choosing a different mounting location. |
| Retainer arms do not grip beverage securely. | Beverage container is outside the adjustable diameter range (1" to 3-1/4"). | Verify the diameter of your beverage container. The holder is designed for specific sizes. |
| Cup holder does not fold smoothly. | Dirt or debris in hinges, or lack of lubrication. | Clean hinges thoroughly. Apply a small amount of silicone-based lubricant to the hinge points. |
| Surface discoloration on stainless steel. | Exposure to harsh chemicals, saltwater, or lack of regular cleaning. | Clean with a stainless steel cleaner and polish. Ensure regular cleaning, especially after exposure to marine environments. |
Garanti og support
Hoffen products are manufactured to high standards. For specific warranty information or technical support, please refer to the product packaging or contact the seller directly. Please have your purchase details and the product ASIN (B06WRWQJH9) ready when contacting support.
Manufacturer: Baisen
Mærke: Hoffen
