Behringer HA8000 V2 8-Channel High-Power Headphone Mixing and Distribution Amplivligere brugervejledning

Indledning

The Behringer HA8000 V2 is an 8-channel high-power headphone mixing and distribution amplifier designed for professional stage and studio applications. It offers superior performance, routing, and mixing functions to provide customized monitoring mixes for multiple listeners. With two independent stereo main inputs and a dedicated direct input on each channel, individual performers can achieve their desired audio mix. This unit ensures high-quality headphone mixing for diverse requirements.

Sikkerhedsinstruktioner

• Læs disse instruktioner.
• Gem disse instruktioner.
• Overhold alle advarsler.
• Følg alle instruktioner.
• Brug ikke dette apparat i nærheden af ​​vand.
• Rengør kun med en tør klud.
• Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
• Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det punkt, hvor de kommer ud af apparatet.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af ​​vognen/apparatet for at undgå skader ved at vælte.
• Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

Produkt overview

The Behringer HA8000 V2 is an 8-channel headphone amplifier designed for high-quality audio distribution. It features a main section for overall control and eight independent channels, each with its own controls and inputs.

Figur 1: Forside view of the Behringer HA8000 V2, showing the main section and eight individual channels with their respective controls and headphone outputs.

Figur 2: Vinklet view of the Behringer HA8000 V2, illustrating its rack-mountable design and overall physical appearance.

Opsætning

Udpakning og placering

• Carefully unpack the HA8000 V2 from its packaging.
• Ensure all components listed in the "What's in the Box" section are present (HA8000 unit, power cable).
• Place the unit on a stable, flat surface or install it into a standard 19-inch equipment rack. Ensure adequate ventilation around the unit.

Strømtilslutning

• Connect the provided power cable to the AC inlet on the rear panel of the HA8000 V2.
• Sæt den anden ende af strømkablet i en passende stikkontakt.
• Ensure the power switch on the front panel is in the "OFF" position before connecting to power.

Lydforbindelser

The HA8000 V2 offers flexible audio input options:

• Main Inputs: Connect your main stereo audio source (e.g., mixer output, audio interface) to the MAIN INPUTS (L/R) on the rear panel using 1/4" TRS or TS cables. These inputs feed all eight headphone channels.
• Direct Inputs (Per Channel): Each of the eight channels has a dedicated DIRECT INPUT on the rear panel. This allows you to feed a separate, individual audio source directly to that specific headphone channel, bypassing the main inputs. This is useful for creating custom monitor mixes for individual performers.
• Hovedtelefonudgange: Connect headphones to the 1/4" TRS PHONES OUT jacks on the front panel for each channel.

Figure 3: Close-up of the HA8000 V2 front panel, highlighting the main section controls and individual channel controls for level, input selection, and mono/stereo mode.

Betjeningsvejledning

Tænd/sluk

• To power on, press the POWER switch on the front panel to the "ON" position.
• To power off, press the POWER switch to the "OFF" position.

Main Section Controls

• MAIN INPUT LEVEL (L/R): These controls adjust the overall input level for the main stereo inputs. Monitor the INPUT LEVEL LEDs to ensure optimal signal without clipping.
• PHONES OUT (MAIN): This output provides a master headphone monitoring point for the main stereo input signal.

Individual Channel Controls (Channels 1-8)

• INPUT SELECT (MAIN IN / DIRECT IN): This button selects whether the channel receives its audio from the main stereo inputs or its dedicated direct input. When the button is engaged, the channel uses the direct input. When disengaged, it uses the main input.
• MONO/STEREO: This button switches the channel's output between mono and stereo modes. In mono mode, the left and right signals are summed.
• OUTPUT NIVEAU: This knob controls the headphone output volume for the respective channel.
• OUTPUT LEVEL LEDs: These LEDs provide visual feedback on the output level for each channel, helping to prevent clipping and ensure a healthy signal.
• TELEFON UD: 1/4" TRS jack for connecting headphones to the individual channel.

Typiske brugsscenarier

• Studiemonitorering: Connect the main mix from your audio interface or mixer to the HA8000 V2's main inputs. Each musician can then plug into a channel and adjust their individual headphone volume.
• Custom Monitor Mixes: For individual musicians requiring a specific mix (e.g., more vocals, less drums), connect a separate auxiliary send from your mixer to the DIRECT INPUT of their assigned HA8000 V2 channel. They can then switch their channel to "DIRECT IN" and control their personal mix level.
• Live ydeevne: Use the HA8000 V2 to distribute monitor mixes to multiple performers on stage using in-ear monitors or headphones.

Opretholdelse

• Rensning: Rengør enheden med en tør, blød klud. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
• Ventilation: Sørg for, at ventilationsåbningerne ikke er blokeret for at forhindre overophedning.
• Opbevaring: When not in use for extended periods, store the unit in a dry, dust-free environment.
• Kabelstyring: Regularly check all audio and power cables for damage. Replace any damaged cables immediately.

Fejlfinding

Specifikationer

Figure 4: Diagram illustrating the dimensions of the Behringer HA8000 V2, showing a width of 21.7 inches (55 cm) in comparison to a seated person.

Garanti og support

For warranty information, service, or technical support, please visit the official Behringer webwebstedet eller kontakt deres kundesupport direkte.

Officiel Webwebsted: https://www.behringer.com/

Gem venligst din købsbevis i tilfælde af garantikrav.