Indledning
The APC UPS 1500VA (Model BX1500M) is an Uninterruptible Power Supply designed to provide guaranteed power and surge protection for your electronic devices. It safeguards wireless networks, computers, and other sensitive electronics from power outages, bindtage fluctuations, and damaging power surges. This unit ensures your data is protected and your devices remain connected during unexpected power events.
Vigtige sikkerhedsinstruktioner
Please read and follow all instructions carefully before installing or operating the UPS. Save this manual for future reference.
- Denne UPS er kun beregnet til indendørs brug.
- Brug ikke denne UPS i direkte sollys, i kontakt med væsker, eller hvor der er meget støv eller fugt.
- Tilslut UPS -strømkablet direkte til en stikkontakt. Brug ikke overspændingsbeskyttere eller forlængerledninger.
- Ensure the UPS is properly grounded.
- Service af batterier bør udføres eller overvåges af personale, der har kendskab til batterier og de nødvendige forholdsregler.
- Smid ikke batterier i ild. Batterier kan eksplodere.
- Batterier må ikke åbnes eller ødelægges. Frigivet elektrolyt er skadelig for hud og øjne. Det kan være giftigt.
Pakkens indhold
Verify that all contents are present upon opening the package:
- APC UPS Unit
- Brugermanual
- USB kabel
- Koaksial kabel
Opsætningsvejledning
1. Udpakning og batteritilslutning
The UPS is shipped with the battery disconnected for safety. Before use, you must connect the internal battery. Refer to the instructions on the yellow sticker on the unit for proper battery orientation and connection.
2. Placering
Place the UPS on a flat, stable surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit to prevent overheating.
3. Tilslutning af udstyr
The UPS features 10 outlets (NEMA 5-15R). Five outlets provide battery backup and surge protection, while the other five offer surge protection only. Connect critical devices like your computer, monitor, and router to the battery backup outlets. Non-critical devices like printers or scanners can be connected to the surge-only outlets.
4. Første opstart
Plug the UPS into a grounded wall outlet. Press the power button on the front panel to turn on the unit. The LCD display will illuminate, indicating the UPS status.
Operation
Frontpanel display og kontroller
The front panel features an LCD display and three control buttons: Power, Mute, and Display. The LCD provides real-time information on utility and UPS status, including estimated runtime, load, and battery charge.
PowerChute software
For advanced management and monitoring, install the PowerChute UPS management software. This software allows for graceful shutdown of connected computers during extended power outages, preventing data loss. It also provides detailed information on power consumption and UPS performance.
Automatisk voltage Forordning (AVR)
UPS'en har automatisk spændingtage Regulation (AVR), which instantly corrects low/high voltage fluctuations without discharging the battery. This ensures a clean, consistent power supply to your connected devices, prolonging their lifespan and maintaining optimal performance.
Opretholdelse
Udskiftning af batteri
The UPS battery is user-replaceable. The typical battery lifespan is 3-5 years, but this can vary based on usage and environmental conditions. When the battery needs replacement, the UPS will indicate this on its display. Use only genuine APC replacement batteries, model APCRBC124 (sold separately), to ensure optimal performance and safety.
Rensning
Brug en blød, tør klud til at rengøre UPS'en udvendigt. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosolbasis. Sørg for, at enheden er taget ud af stikkontakten, inden rengøring.
Fejlfinding
Se tabellen nedenfor for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| UPS'en tænder ikke | Batteri ikke tilsluttet eller lav opladning | Sørg for, at batteriet er korrekt tilsluttet. Oplad UPS'en i mindst 8 timer. |
| Konstant bip | On battery power or overload | If on battery, power has been lost. Save work and shut down. If overloaded, remove non-essential devices. Press Mute button to silence alarm. |
| Battery icon shows depleted / False alarm | Temporary sensor anomaly | Mute the alarm. The unit may self-correct within 24 hours. If persistent, contact support. |
| Ingen strøm til tilsluttede enheder | Strømafbryder udløst | Press the circuit breaker reset button on the rear of the unit. Reduce load if necessary. |
Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | BX1500M |
| Kapacitet | 1500VA / 900W |
| Input bindtage | 120 volt |
| Outlets | 10 (5 Batteribackup og overspænding, 5 Kun overspænding) |
| Batteritype | Forseglet blysyre |
| Produktdimensioner (DxBxH) | 15.04 cm x 3.94 cm x 9.84 cm |
| Varens vægt | 24.2 pund |
| Datalinjebeskyttelse | 1 GB Network Dataline Protection |
Garanti og support
The APC UPS 1500VA (BX1500M) typically comes with a 3-year warranty. For detailed warranty terms and conditions, please refer to the official APC webwebstedet eller garantikortet, der følger med dit produkt.
For technical support, troubleshooting assistance, or warranty claims, please contact APC Customer Service. You can also find additional resources and frequently asked questions on the official APC support webwebsted.
En omfattende brugervejledning i PDF-format kan downloades: Download brugervejledning (PDF)
