EchoMaster Universal Backup Camera (Model Cam-LP1-N)

1. Introduktion

The EchoMaster Universal Backup Camera (Model Cam-LP1-N) is designed to provide enhanced visibility for your vehicle, assisting with parking and maneuvering. This camera can be installed for either front or rear views, offering a 170-degree wide viewing angle and night vision capabilities. Its IP68 waterproof rating ensures durability in various weather conditions. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance.

Billede 1.1: EchoMaster Universal Backup Camera with License Plate Mount. This image displays the compact camera module attached to a standard license plate bracket, ready for vehicle installation.

2. Pakkens indhold

Kontroller venligst, at alle nedenstående varer er til stede i din pakke:

• Backup Camera Module
• Nummerpladebeslag
• Optional Lip Mount Bracket
• Monteringsudstyr (skruer, møtrikker, skiver)
• Instruktionsmanual
• Video Cable (RCA type)
• Strømkabel

3. Produktfunktioner

• Universal kompatibilitet: Designed for use with various vehicles including cars, trucks, RVs, and mini-vans.
• Alsidig montering: Includes both a license plate bracket and an optional lip mount bracket for flexible installation.
• Bred Viewvinkel: Features a 170-degree lens for comprehensive coverage behind or in front of the vehicle.
• Nattesyn: Equipped with low-light capabilities for clear visibility in dark conditions.
• IP68 vandtæt rating: Ensures reliable operation in adverse weather conditions, protecting against dust and water immersion.
• Selectable Image Orientation: Allows for mirror image (rear view) or normal image (front view) display.
• Optional Parking Lines: Integrated parking guidelines can be activated or deactivated.

Billede 3.1: Close-up of the Camera Module. This image highlights the compact design and lens of the EchoMaster camera, demonstrating its discreet profile.

4. Sikkerhedsoplysninger

• Frakobl altid køretøjets batteri, før du påbegynder nogen form for elektrisk installation.
• Sørg for, at alle ledninger er korrekt isoleret og fastgjort for at forhindre kortslutninger eller skader.
• Route cables away from hot surfaces, moving parts, and sharp edges.
• Bloker ikke førerens view eller forstyrre køretøjets betjeningselementer under installationen.
• This camera is an aid for safe driving and parking; it does not replace the driver's responsibility to check surroundings.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret fagmand.

5. Installationsvejledning

The EchoMaster Universal Backup Camera offers two primary mounting options: license plate mount and lip mount. Choose the option best suited for your vehicle.

5.1. Valg af monteringssted

• Bag View: Typically mounted above the license plate or on the bumper. This provides a clear view of obstacles and parking lines when reversing.
• Front View: Can be mounted on the front bumper or grille. Useful for parking in tight spaces or navigating obstacles directly in front of the vehicle.

5.2. License Plate Mount Installation

1. Remove your vehicle's rear license plate.
2. Attach the camera module to the provided license plate bracket using the small screws and nuts. Ensure the camera lens faces outwards and downwards slightly for optimal viewvinkel.
3. Position the assembled camera and bracket behind your license plate, aligning the mounting holes.
4. Secure the license plate and camera bracket to the vehicle using your original license plate screws. Ensure the camera is stable and does not obstruct the license plate characters.
5. Carefully route the camera's video and power cables through a discreet opening into the vehicle's interior. This may require drilling a small hole if no existing access point is available. Seal any drilled holes with silicone sealant to prevent water entry.

Billede 5.1: License Plate Bracket. This image shows the metal bracket designed to integrate the camera discreetly with your vehicle's license plate.

5.3. Lip Mount Installation (Optional)

1. Identify a suitable flat surface on your vehicle's bumper or trunk lip where the camera can be mounted.
2. Attach the camera module to the optional lip mount bracket.
3. Mark the drilling points for the lip mount bracket and the cable pass-through hole.
4. Drill the necessary holes. Ensure the holes are appropriately sized for the mounting screws and cable.
5. Secure the lip mount bracket with the camera to the vehicle using the provided mounting hardware.
6. Route the camera's video and power cables through the drilled hole into the vehicle's interior. Seal the hole with silicone sealant.

Billede 5.2: Camera with Lip Mount Bracket. This side view illustrates the camera attached to the lip mount bracket, suitable for mounting on a flat surface.

5.4. Ledningsforbindelser

Refer to the wiring diagram below for proper electrical connections. It is recommended to have this step performed by a professional if you are not familiar with automotive electrical systems.

• Strømtilslutning (rød ledning): Connect the red power wire from the camera to a 12V switched power source. For rear view cameras, this is typically the vehicle's reverse light circuit, so the camera activates when reverse gear is engaged. For front view cameras, connect to an ignition-switched 12V source or a dedicated switch.
• Jordforbindelse (sort ledning): Connect the black ground wire to a clean, unpainted metal surface on the vehicle chassis.
• Video Connection (RCA Yellow Connector): Connect the yellow RCA video cable from the camera to the video input of your display monitor or head unit.
• Mirror Image / Parking Line Control: The camera features small loops (often green for parking lines, white for mirror image) near the camera end of the cable.
• To deactivate parking lines, cut the green loop.
• To switch between mirror image (default for rear view) and normal image (for front view), cut the white loop (if present, otherwise consult specific product documentation).

6. Ledningsdiagram

Billede 6.1: Wiring Diagram and Pin Out. This diagram illustrates the connections for the camera's power (red +12V, black GND) and video (yellow RCA), along with the green loop for parking line deactivation and the mirror image switch.

7. Betjening

Once properly installed and wired, the EchoMaster Universal Backup Camera operates automatically based on its power connection.

• Bag View Kamera: When connected to the reverse light circuit, the camera will automatically power on and display the rear view on your monitor when the vehicle is shifted into reverse gear.
• Front View Kamera: If wired to an ignition-switched power source or a dedicated switch, the camera will activate when the ignition is on or the switch is engaged, displaying the front view.
• Billedvisning: Kameraet giver et klart vidvinkelbillede view. If parking lines are enabled, they will appear on the screen to assist with judging distance.
• Nattesyn: The camera automatically adjusts to low-light conditions, providing enhanced visibility in the dark.

8. Vedligeholdelse

• Rengøring af linsen: Rengør kameralinsen regelmæssigt med en blød kludamp klud til at fjerne snavs, støv eller vandpletter, der kan blokere viewUndgå slibende rengøringsmidler.
• Kabelinspektion: Regularly inspect all cables and connections for signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• Monteringssikkerhed: Check the camera's mounting bracket periodically to ensure it remains firmly attached to the vehicle. Tighten any loose screws if necessary.
• Undgå højtryksspuling: While the camera is IP68 rated, direct high-pressure water jets from car washes can potentially damage seals over time. Exercise caution.

9. Fejlfinding

10. Specifikationer

11. Garanti og support

For warranty information and technical support, please refer to the official EchoMaster webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.

You can visit the EchoMaster store for more products and support information: EchoMaster Store