Acme Louis Philippe III Queen-seng med opbevaring Brugermanual

1. Introduktion

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your Acme Louis Philippe III Queen Storage Bed. Please read this manual thoroughly before assembly and retain it for future reference. This bed features a classic design with integrated storage, including drawers and open compartments, designed for convenience and functionality.

2. Sikkerhedsoplysninger

• Følg altid samlevejledningen nøje. Forkert montering kan føre til ustabilitet og skader.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
• Do not exceed the maximum weight limit of 820 pounds for the bed.
• Hold små dele og emballagematerialer væk fra børn for at forhindre kvælningsfare.
• Use caution when moving the bed to prevent damage or injury. It is recommended to have at least two people for assembly and moving.
• Dette produkt er beregnet til voksenbrug.

3. Pakkens indhold

Before beginning assembly, verify that all components listed in your product's packaging are present and undamaged. Refer to the parts list provided with your specific packaging for a complete inventory. Typical components include:

• Headboard with integrated storage (drawers and open compartments)
• Fodplade
• Sideskinner
• Bed slats or support system
• Storage drawers for the bed base
• Monteringsudstyr (skruer, bolte, skiver osv.)

4. Monteringsvejledning

Assembly of the Acme Louis Philippe III Queen Storage Bed is required. It is highly recommended that two adults perform the assembly to ensure safety and proper construction. Please follow the step-by-step instructions and diagrams provided in the separate assembly guide included with your product packaging. A box spring is not required for this bed.

Trin for generalforsamling:

1. Pak alle komponenter ud, og læg dem på en ren, blød overflade for at forhindre ridser.
2. Identify all parts and hardware using the provided parts list.
3. Fastgør sideskinnerne til hovedgærdet og fodgærdet med det angivne beslag.
4. Install the bed slats or support system across the side rails.
5. Assemble and insert the storage drawers into their designated compartments in the bed base and headboard.
6. Ensure all connections are secure and stable before placing a mattress on the bed.

Figure 1: Fully assembled Acme Louis Philippe III Queen Storage Bed, showcasing the headboard with drawers and open compartments, and the storage drawers in the bed base.

5. Betjeningsvejledning

The Louis Philippe III Queen Storage Bed is designed for ease of use with its integrated storage features.

Brug af opbevaringsskuffer:

• The bed includes five drawers: two in the headboard and three in the bed base.
• To open a drawer, gently pull the handle. To close, push the drawer firmly until it is fully seated.
• Avoid overloading drawers to ensure smooth operation and prevent damage to the drawer slides.

Using the Open Compartments:

• The headboard features two open compartments, ideal for books, decorative items, or small electronics.
• Ensure items placed in these compartments are stable and do not protrude in a way that could cause injury or fall.

Figure 2: Detail of an open storage drawer, highlighting the brushed nickel hardware and interior finish.

6. Vedligeholdelse og pleje

Proper care will extend the life and appearance of your bed. This product is made from wood and veneers with a white finish.

• Rensning: Tør overflader af med en blød, damp cloth. Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spild: Dup spild straks op med en ren, tør klud.
• Sollys: Undgå langvarig udsættelse for direkte sollys, da dette kan forårsage falmning eller misfarvning.
• Varme og fugt: Keep the bed away from direct heat sources and areas of high humidity.
• Hardware: Periodically check all bolts and screws and tighten them as necessary to maintain stability.

7. Fejlfinding

If you encounter issues with your bed, refer to the following common solutions:

• Ustabil ramme: Ensure all assembly hardware is fully tightened. If the issue persists, disassemble and reassemble, paying close attention to the alignment of parts.
• Skuffer glider ikke jævnt: Check for obstructions in the drawer slides. Ensure the drawers are correctly aligned on their tracks. Avoid overloading the drawers.
• Manglende dele: If any parts were missing upon delivery, contact customer support immediately with your purchase information.
• Beskadigede dele: If any parts arrived damaged, do not proceed with assembly. Contact customer support for replacement parts.

8. Specifikationer

9. Garantioplysninger

This Acme Louis Philippe III Queen Storage Bed comes with a Limited Warranty. Details regarding the duration and coverage of this warranty are typically provided in a separate warranty document included with your purchase. The limited warranty generally covers manufacturing defects in materials and workmanship under normal use. It typically does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

10. Kundesupport

For assistance with assembly, missing parts, damaged components, or warranty inquiries, please contact Acme Furniture customer support. Have your model number (AC-24490Q) and proof of purchase readily available when contacting support.

You may find contact information on the packaging, the Acme Furniture webhjemmeside eller gennem din forhandler.