Scott Essential Manual Hard Roll Towel Dispenser User Manual

Indledning

This manual provides essential information for the proper installation, operation, and maintenance of your Scott Essential Manual Hard Roll Towel Dispenser. Please read these instructions thoroughly before use to ensure safe and efficient operation.

Sikkerhedsoplysninger

• Always ensure the dispenser is securely mounted to a stable surface to prevent accidental falls.
• Keep hands clear of moving parts during towel loading and dispensing.
• Use only compatible hard roll towels as specified by the manufacturer.
• Do not attempt to modify or disassemble the dispenser beyond the instructions provided.
• Opbevares utilgængeligt for små børn.

Pakkens indhold

Kontroller, at alle elementer er til stede, før installationen påbegyndes:

• Scott Essential Manual Hard Roll Towel Dispenser (Model KCC46253)
• Monteringsudstyr (skruer, ankre) - typically included, but may vary by package
• Key for dispenser access - hvis det er relevant

Opsætning og installation

Follow these steps for proper installation of your towel dispenser:

1. Vælg placering: Select a suitable wall location, ensuring sufficient clearance for operation and maintenance. Consider ADA compliance if applicable.
2. Marker monteringspunkter: Hold the dispenser against the wall at the desired height. Use a pencil to mark the locations for the mounting screws through the pre-drilled holes on the back of the dispenser.
3. Bor pilothuller: Using an appropriate drill bit for your wall type (e.g., drywall, concrete), drill pilot holes at the marked locations. If installing into drywall, insert wall anchors.
4. Sikker dispenser: Align the dispenser with the drilled holes. Insert screws through the dispenser's mounting holes and into the pilot holes/anchors. Tighten securely, but do not overtighten.

Image: Scott Essential Manual Hard Roll Towel Dispenser (Model KCC46253). This image illustrates the overall appearance of the dispenser, which is black with the "Scott" logo on the front. The lower part shows the dispensing slot and hand icons indicating how to pull the towel.

Betjeningsvejledning

Loading Paper Towels

1. Lås op og åbn: Use the provided key (if applicable) to unlock the dispenser cover. Open the cover fully.
2. Insert Roll: Place a new hard roll towel onto the internal spindle or cradle, ensuring the paper feeds from the bottom of the roll.
3. Thread Paper: Carefully thread the leading edge of the paper towel through the dispensing mechanism until it protrudes slightly from the dispensing slot. Ensure it is properly aligned to prevent jamming.
4. Luk og lås: Close the dispenser cover firmly until it latches. Lock it with the key if necessary.

Dispensing Towels

To dispense a towel, simply pull the exposed paper downwards from the dispensing slot. The manual mechanism will feed the next towel for use.

Opretholdelse

Rensning

• Tør dispenserens yderside regelmæssigt af med en blød klud.amp klud og mild sæbe.
• Undgå slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
• Periodically open the dispenser and remove any paper dust or debris from the interior.

Inspektion

• Check mounting screws periodically to ensure they remain tight.
• Inspect the dispensing mechanism for any signs of wear or damage.

Fejlfinding

Specifikationer

Garanti og support

For information regarding warranty coverage, technical support, or replacement parts, please contact Kimberly-Clark Professional customer service. Refer to the official Kimberly-Clark Professional webwebstedet eller produktemballagen for at få de seneste kontaktoplysninger og garantivilkår.

Bemærk: Specifikke garantivilkår kan variere afhængigt af region og forhandler. Gem venligst din købsbevis.