ROGER R30/804 230V AC irreversibel elektromekanisk gearmotor brugsanvisning

1. Introduktion

This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of the ROGER R30/804 230V AC irreversible electromechanical gear motor. This motor is designed for sliding gates weighing up to 800 kg. Please read this manual thoroughly before proceeding with any installation or operation to ensure proper functionality and safety.

2. Sikkerhedsoplysninger

• Installation and maintenance must be performed by qualified personnel only, in compliance with local regulations and safety standards.
• Always disconnect the main power supply before performing any installation, maintenance, or troubleshooting procedures.
• Ensure all electrical connections are properly insulated and protected from environmental elements.
• Lad ikke børn eller uautoriserede personer betjene portsystemet.
• Hold området omkring porten fri for forhindringer under drift.
• Regularly inspect the gate and motor for any signs of wear, damage, or malfunction.

3. Produktet er slutview

The ROGER R30/804 is a robust 230V AC electromechanical gear motor engineered for reliable operation of sliding gates up to 800 kg. It features an integrated H70 control unit, which manages the gate's movement and safety functions. The motor is equipped with both optical and magnetic limit switches for precise gate positioning.

Standard accessories included with the motor are:

• KT210: Steering rods and fixing screws for secure mounting.
• MC775: Magnetic limit switch kit complete with magnets for accurate end-of-travel detection.

Figur 1: ROGER R30/804 Electromechanical Gear Motor. This image displays the compact, grey and black casing of the motor unit, designed for outdoor installation next to a sliding gate.

4. Opsætning og installation

Installation of the ROGER R30/804 motor requires adherence to specific guidelines to ensure safe and efficient operation. It is strongly recommended that installation be carried out by a certified professional.

4.1 Forberedelse af stedet

• Ensure the gate track is clean, level, and free from obstructions.
• Prepare a stable and level concrete base for mounting the motor, ensuring adequate drainage.

4.2 Montering af motoren

• Securely fasten the motor to the prepared base using appropriate anchor bolts.
• Ensure the motor's pinion gear aligns correctly with the gate's rack, maintaining a small clearance (approximately 1-2 mm) to prevent binding.

4.3 Elektriske forbindelser

• Connect the main power supply (230V AC) to the integrated H70 control unit, following the wiring diagram provided in the full technical manual.
• Connect all safety devices (e.g., photocells, safety edges) and control devices (e.g., remote receivers, push buttons) to the control unit as per the wiring instructions.
• Ensure proper grounding of the motor and all associated components.

4.4 Justering af grænsekontakt

• Install the magnetic limit switches (MC775) at the desired open and closed positions of the gate.
• Adjust the position of the magnets to ensure the gate stops precisely at the intended end-of-travel points.

5. Betjeningsvejledning

Once installed and configured, the ROGER R30/804 motor operates automatically based on commands from connected control devices.

5.1 Normal drift

• Activate the gate by pressing the designated button on your remote control or wall switch.
• The gate will open or close until it reaches the set limit switch position or detects an obstruction via safety devices.
• The integrated control unit manages acceleration and deceleration for smooth movement.

5.2 Manuel udløsning

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the motor unit (refer to the detailed product diagram in the full manual). Insert the provided key and turn it to disengage the motor, allowing the gate to be moved by hand. Remember to re-engage the motor after manual operation.

6. Vedligeholdelse

Regular maintenance ensures the longevity and reliable operation of your ROGER R30/804 motor.

6.1 Månedlige kontroller

• Inspect the gate track and wheels for debris or damage.
• Check the motor casing for any signs of damage or loose fasteners.
• Verify that safety devices (e.g., photocells) are clean and functioning correctly.

6.2 Bi-Annual Checks (by qualified technician)

• Inspect internal electrical connections for corrosion or wear.
• Check the motor's gear and pinion for wear and proper lubrication.
• Verify the accuracy of the limit switches.
• Test the manual release mechanism.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer. Kontakt en kvalificeret tekniker ved komplekse problemer.

• Motoren reagerer ikke: Check power supply, circuit breaker, and remote control battery. Ensure the manual release is fully engaged.
• Porten stopper uventet: Check for obstructions in the gate's path. Verify that safety photocells are clean and aligned.
• Gate not closing/opening fully: Re-check the adjustment of the magnetic limit switches. Inspect the gate track for debris.
• Usædvanlige lyde: Disconnect power and inspect the motor's gear and the gate's rack for foreign objects or wear.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the terms and conditions provided by your seller or the official ROGER TECHNOLOGY website. For technical support, spare parts, or professional assistance with installation and complex repairs, please contact a qualified ROGER TECHNOLOGY service center or your authorized dealer.