1. Introduktion
This user manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ROGER TECHNOLOGY E80/TX52R/2 remote control. This 2-channel fixed code remote operates at 433.92 MHz and features a convenient copy function, allowing it to duplicate signals from compatible existing remotes. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2. Sikkerhedsoplysninger
- Opbevar fjernbetjeningen utilgængeligt for børn for at forhindre utilsigtet betjening eller indtagelse af små dele.
- Do not expose the remote control to water, excessive moisture, or extreme temperatures.
- Avoid dropping or subjecting the remote control to severe impacts.
- Only use the specified battery type (AAA) and ensure correct polarity during installation.
- Bortskaf brugte batterier ansvarligt i henhold til lokale regler.
- Do not attempt to disassemble or modify the remote control, as this will void the warranty and may cause malfunction.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x ROGER TECHNOLOGY E80/TX52R/2 Remote Control
- 1 x Brugermanual (dette dokument)
- (Batteries may or may not be included, depending on the retailer. Typically, 1x AAA battery is required.)
4. Produktet er slutview
The E80/TX52R/2 remote control is designed for ease of use and reliability. It features two distinct buttons for controlling two separate channels, making it suitable for various applications such as garage doors, gates, or other compatible fixed-code receivers. The integrated copy function allows for simple duplication of existing fixed-code remote signals.
Figur 1: Forside view of the E80/TX52R/2 Remote Control. Note the two primary control buttons, the LED indicator, and the ROGER TECHNOLOGY branding.
Nøglekomponenter:
- Knap 1: Top left button, typically used for Channel 1.
- Knap 2: Top right button, typically used for Channel 2.
- LED-indikator: Small light at the top center, illuminates during transmission or programming.
- Programming Port/Hole: Small hole at the bottom left, used for specific programming procedures.
5. Opsætning
5.1 Batteriinstallation
The E80/TX52R/2 remote control requires one AAA battery. To install or replace the battery:
- Find batterirummets dæksel på bagsiden af fjernbetjeningen.
- Carefully slide or unclip the cover to open the compartment.
- Insert one AAA battery, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
- Luk batterirummets dæksel forsvarligt.
5.2 Programming the Remote (Copy Function)
This remote control can copy the signal from an existing fixed-code remote. Ensure your existing remote is functional and has a fixed code operating at 433.92 MHz.
- Ryd eksisterende kode: Press and hold both buttons (Button 1 and Button 2) simultaneously on the new E80/TX52R/2 remote until the LED indicator flashes rapidly (approximately 5-10 seconds). Release both buttons. The LED should now flash slowly, indicating it's ready to learn.
- Gå ind i læringstilstand: Press and hold the button on the new remote that you wish to program (e.g., Button 1). The LED will illuminate steadily.
- Position fjernbetjeninger: Hold your existing remote control close to the new E80/TX52R/2 remote, ideally back-to-back or side-by-side, ensuring their transmitters are aligned.
- Send signal: While holding the button on the new remote, press and hold the corresponding button on your existing remote that you want to copy.
- Confirm Copy: The LED on the new E80/TX52R/2 remote should flash rapidly, then turn solid, indicating a successful copy. Release both buttons.
- Gentag for andre knapper: If you wish to program the second button, repeat steps 2-5 for Button 2.
- Test funktionalitet: After programming, test the new remote control with your receiver to ensure it operates correctly.
Note: If the LED does not flash rapidly or the copy process fails, ensure the existing remote is transmitting a strong signal and try repositioning the remotes. Some rolling code remotes are not compatible with this copy function.
6. Betjeningsvejledning
Once programmed, operating the E80/TX52R/2 remote control is straightforward:
- To Activate Channel 1: Press and hold Button 1. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
- To Activate Channel 2: Press and hold Button 2. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
Ensure you are within the effective operating range of your receiver (up to 10 meters, depending on environmental factors and receiver sensitivity).
7. Vedligeholdelse
- Rensning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Udskiftning af batteri: Replace the AAA battery when the LED indicator becomes dim or the remote's range decreases significantly. Follow the battery installation steps in Section 5.1.
- Opbevaring: Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer, når den ikke er i brug i længere perioder.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen virker ikke efter programmering. | Incorrect programming; incompatible original remote; low battery. | Re-attempt programming carefully following Section 5.2. Ensure the original remote is fixed code and 433.92 MHz. Replace battery. |
| LED does not light up when pressing a button. | Dødt eller forkert installeret batteri. | Check battery polarity or replace with a new AAA battery. |
| Reduceret rækkevidde. | Low battery; interference; obstruction. | Replace battery. Ensure clear line of sight to receiver. Move away from sources of interference. |
| Cannot clear existing code (LED doesn't flash rapidly). | Buttons not pressed simultaneously or long enough. | Ensure both buttons are pressed firmly and held for the required duration (5-10 seconds). |
9. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | E80/TX52R/2 |
| Mærke | ROGER TEKNOLOGI |
| Frekvens | 433.92 MHz |
| Antal kanaler | 2 |
| Kodetype | Fixed Code (with copy function) |
| Strømkilde | 1 x AAA batteri |
| Max rækkevidde | Op til 10 meter (33 fod) |
| Farve | Lysegrå |
| Kompatible enheder | Home automation devices, household appliances (with compatible 433.92 MHz fixed code receivers) |
10. Garanti og support
For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. ROGER TECHNOLOGY products are designed for reliability, and support is available for any operational issues or inquiries.
For further assistance, you may visit the official ROGER TECHNOLOGY website or contact their customer service department. Please have your model number (E80/TX52R/2) ready when seeking support.
