Progress Lighting Inspire P3696-2030K9 LED Flush Mount Instruction Manual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Inspire One-Light LED Flush Mount, Model P3696-2030K9. Please read these instructions thoroughly before beginning installation and retain them for future reference. This fixture features an antique bronze finish, an etched glass diffuser, and an off-white linen shade, designed for indoor residential use.

2. Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved afbryderen eller sikringsboksen før installation eller service.
All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
Brug kun UL/cUL-godkendte ledningsforbindelser.
This product is designed for indoor use only. Do not install in wet locations.
Sørg for, at armaturet er sikkert monteret på en strukturelt solid del af loftet.
Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, som staten Californien kender til at forårsage kræft og fosterskader eller anden reproduktionsskade.

3. Pakkens indhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

LED Flush Mount Fixture (P3696-2030K9)
Monteringshardwaresæt
Installation Sheet (this document)

Progress Lighting Inspire LED Flush Mount Fixture, Antique Bronze

Figure 1: Progress Lighting Inspire LED Flush Mount Fixture (P3696-2030K9) in Antique Bronze. This image shows the complete assembled light fixture.

4. Specifikationer

Problem	Mulig årsag	Løsning
Lyset tændes ikke.	Strømmen er afbrudt ved afbryderen. Løse ledningsforbindelser. Defekt vægafbryder.	Kontroller afbryderen og sørg for, at der er strøm på. Kontroller, at alle ledningsforbindelser er sikre (sørg for, at strømmen er slukket, før du kontrollerer). Test vægkontakten, eller udskift den om nødvendigt.
Lyset flimrer eller dæmpes forkert.	Inkompatibel lysdæmper. Løse ledningsforbindelser.	Ensure the dimmer switch is compatible with LED lighting. Check wire connections (ensure power is off before checking).
Fixture does not sit flush with the ceiling.	Improper mounting plate installation. Obstruction in the ceiling box.	Re-check mounting plate alignment and ensure all screws are tightened. Inspect the ceiling box for any obstructions.

Dimensions of Progress Lighting Inspire LED Flush Mount Fixture

Figure 2: Dimensional drawing of the Inspire LED Flush Mount, showing a 13-inch diameter and 6-inch height.

5. Opsætning og installation

Før du begynder: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, electrical tape, safety glasses).

Forbered monteringsplade: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is secure.
Elektriske forbindelser:
- Tilslut grøn eller bar kobberjordledning fra armaturet til grøn eller bar kobberjordledning from the junction box using a wire connector.
- Tilslut hvid ledning fra armaturet til hvid (neutral) ledning from the junction box using a wire connector.
- Tilslut sort ledning fra armaturet til sort (varm) ledning from the junction box using a wire connector.
- Sørg for, at alle forbindelser er tætte og sikre.
Monter armaturet: Carefully push the wired fixture up to the ceiling, aligning the mounting holes on the fixture with the screws on the mounting plate. Secure the fixture with the decorative nuts or screws provided.
Install Shade and Diffuser: Place the etched glass diffuser into the fixture, followed by the off-white linen shade. Secure them according to the specific design of your fixture (e.g., with a finial or retaining ring).
Gendan strøm: Once installation is complete and all components are secure, restore power at the circuit breaker.

Note: For detailed diagrams, refer to the separate installation sheet included with your product.

6. Betjeningsvejledning

The Progress Lighting Inspire LED Flush Mount is operated via a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted to your desired brightness level.

Tænd/sluk: Flip the wall switch connected to the fixture to turn the light on or off.
Dæmpningsfunktion: If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust the light intensity. Ensure your dimmer switch is rated for LED lighting.

7. Vedligeholdelse

To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:

Rensning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
Skyggepleje: The linen shade can be gently dusted with a soft brush or vacuumed with a brush attachment. Avoid getting the shade wet.
LED lyskilde: Den integrerede LED-lyskilde er designet til langvarig brug og kan ikke udskiftes af brugeren.

8. Fejlfinding

Problem	Mulig årsag	Løsning
Lyset tændes ikke.	Strømmen er afbrudt ved afbryderen. Løse ledningsforbindelser. Defekt vægafbryder.	Kontroller afbryderen og sørg for, at der er strøm på. Kontroller, at alle ledningsforbindelser er sikre (sørg for, at strømmen er slukket, før du kontrollerer). Test vægkontakten, eller udskift den om nødvendigt.
Lyset flimrer eller dæmpes forkert.	Inkompatibel lysdæmper. Løse ledningsforbindelser.	Ensure the dimmer switch is compatible with LED lighting. Check wire connections (ensure power is off before checking).
Fixture does not sit flush with the ceiling.	Improper mounting plate installation. Obstruction in the ceiling box.	Re-check mounting plate alignment and ensure all screws are tightened. Inspect the ceiling box for any obstructions.

9. Garanti og support

Dette Progress Lighting-produkt er dækket af en 5 års begrænset garanti. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or missing parts, please contact Progress Lighting customer service. Refer to the official Progress Lighting webhjemmeside for aktuelle kontaktoplysninger.

Online ressourcer: Besøg Progress Lighting Store på Amazon

	Installationsvejledning til Progress Lighting Latham loftslampe med 3 lyskilder Denne vejledning indeholder installationsvejledning til Progress Lighting Latham Collection 3-lyskaster loftslampe med indbygget montering (model P350261-009). Lær, hvordan du installerer din nye armatur sikkert og korrekt.
	Progress Lighting P350268 2-lys delvist indbygget installationsvejledning Detaljerede monterings- og installationsvejledninger til Progress Lighting P350268 halvplansmonteret armatur med 2 lyskilder. Indeholder deleliste, hardwareoplysninger, sikkerhedsforanstaltninger og trinvis vejledning.
	Progress Lighting P550133 Keegan Collection 1-Light Outdoor Flush Mount Installation Guide Step-by-step installation instructions for the Progress Lighting P550133 Keegan Collection 1-Light Outdoor Flush Mount fixture. Includes package contents, hardware, safety information, assembly instructions, and care tips.
	Progress Lighting Atwell Pendellampe - P500284-109 Oplev Progress Lighting Atwell pendellampen (P500284-109) i børstet bronze. Denne iøjnefaldende lampe har en unik blanding af cirkulære og arkitektoniske designs med klare globeformede skærme, ideel til entréer, køkkener og spisestuer i mid-century modern, moderne, nutidig eller luksuriøse omgivelser. Den bruger to maks. 60W E12-sokkelpærer og er fuldt dæmpbar.
	Progress Lighting P350257 4-LT halvplansmonteret installationsvejledning Detaljerede installationsvejledninger og sikkerhedsoplysninger til Progress Lighting P350257 4-LT halvindbygget armatur. Indeholder pakkens indhold, hardwareliste og trinvis monteringsvejledning.
	Progress Lighting P350232 3-LT Semi-Indbygget Konverter Installationsvejledning Detaljerede installationsvejledninger til Progress Lighting P350232 3-lys halvindbygget konvertibel armatur. Indeholder pakkens indhold, hardware, sikkerhedsoplysninger, forberedelse, pleje, monteringstrin til lofts- og hængende montering samt garantioplysninger.

Progress Lighting P3696-2030K9