1. Introduktion og produktoversigtview
The DryEasy Plus Wireless Bedwetting Alarm is an electronic device designed to assist in overcoming nocturnal enuresis (bedwetting). This system utilizes a sensor to detect moisture and wirelessly transmit a signal to a receiver, which then activates an alarm (sound and/or vibration) to alert the user.
Nøglefunktioner omfatter:
- Wireless operation for enhanced comfort and mobility.
- Reliable sensor that detects the first drops of urine.
- Multiple alarm sounds (6 options) to prevent habituation.
- Adjustable digital volume control (4 levels).
- Three operation modes: sound only, vibration only, or sound plus vibration.
- No pairing required; the system is ready for use upon setup.
Vigtige overvejelser før brug:
- Forældreinddragelse: Parents play a critical role in the initial stages of alarm training. For children who are deep sleepers, active parental involvement (e.g., sleeping in the same room to wake the child) is crucial until the child can respond to the alarm independently.
- Gradual Process: It is normal for the child to not stop urinating quickly at the beginning of training. The brain requires time to condition itself to respond to bladder signals.
- Patience and Persistence: Alarm training is a gradual process, typically taking 1-3 months to observe improvement and up to 4 months for consistent dry nights. Success is not guaranteed, but motivation and persistence significantly improve outcomes.
2. Pakkens indhold
The DryEasy Plus Wireless Bedwetting Alarm package includes the following components:
- 1 x Receiver Unit (White)
- 1 x Transmitter Unit (Blue) with attached sensor
- Instruktionsmanual (dette dokument)
3. Komponentidentifikation
Familiarize yourself with the main components of the DryEasy Plus system:
3.1 Modtagerenhed
The receiver unit is the alarm component that produces sound and/or vibration. It is designed to be placed on a bedside table or near the user.
- Nulstil knap: Used to silence the alarm and reset the system after an event.
- Indikatorlys: Provides visual feedback, such as low battery or alarm status.
- Speaker/Vibrator: Emits audible alarms and/or vibrates to alert the user.
3.2 Transmitter Unit and Sensor
The transmitter unit is a small, blue device that attaches to the user's clothing. It is connected to a moisture-sensitive sensor that clips onto underwear.
- Sender: Sends a wireless signal to the receiver when moisture is detected.
- Fugtsensor: A small clip that attaches to the underwear to detect urine.
- Skift Clamp: Ensures secure attachment of the sensor to the underwear.
4. Opsætningsvejledning
Follow these steps to set up your DryEasy Plus Wireless Bedwetting Alarm:
4.1 Batteriinstallation
Both the Receiver and Transmitter units require batteries for operation.
- Open the battery compartment on the back of both the Receiver and Transmitter units.
- Indsæt to (2) AAA alkaliske batterier into each unit, ensuring correct polarity (+/-).
- Luk batterirummene forsvarligt.
Bemærk: Batterier er ikke inkluderet og skal købes separat.
4.2 Placement of Receiver Unit
Place the white Receiver unit on a bedside table or another stable surface within close proximity to the user. Ensure it is within a reasonable range (up to 30 meters) of the Transmitter for optimal signal reception.
4.3 Attaching the Transmitter and Sensor
The blue Transmitter unit and its attached sensor are designed to be worn by the user.
- Ensure the user is wearing underwear.
- Clip the small moisture sensor onto the outside of the user's underwear at the point where urine is most likely to be detected first. The toggle clamp should securely hold the sensor in place.
- Attach the blue Transmitter unit to the waistband of the user's underwear or pajamas. The transmitter should be positioned comfortably and securely.
The DryEasy Plus system uses advanced wireless technology and does not require manual pairing. Once batteries are installed and components are placed, the system is ready for operation.
5. Betjeningsvejledning
The DryEasy Plus alarm offers customizable settings for sound, vibration, and volume.
5.1 Valg af driftstilstand
The Receiver unit has three distinct operation modes:
- Kun lyd: The alarm will only produce an audible sound when triggered.
- Kun vibration: The alarm will only vibrate when triggered, providing a silent alert.
- Sound Plus Vibration: The alarm will both produce an audible sound and vibrate when triggered.
To change the mode, locate the mode selection button on the Receiver unit and press it until the desired mode is indicated (e.g., by an LED pattern or a brief test of the mode).
5.2 Adjusting Sound and Volume
The Receiver unit offers 6 different alarm sounds and 4 levels of digital volume control.
- Changing Sounds: Press the sound selection button (if available, or cycle through sounds using the mode button if combined) to choose a preferred sound. You can select a single sound or set it to play the 6 sounds at random to prevent the user from becoming accustomed to one sound.
- Lydstyrkekontrol: Use the volume control buttons (up/down) on the Receiver unit to adjust the alarm volume to one of the 4 available levels.
5.3 Alarm Activation and Reset
When the sensor detects moisture, the Transmitter will send a signal to the Receiver, activating the alarm according to the selected mode (sound, vibration, or both).
To silence and reset the alarm after it has been triggered:
- Tryk på Nulstil button on the Receiver unit. This will stop the alarm.
- Remove the wet underwear and sensor. Clean and dry the sensor thoroughly before re-attaching it to fresh underwear.
- Ensure the sensor is completely dry before re-use to prevent false alarms.
6. Vedligeholdelse
Proper maintenance ensures the longevity and effective operation of your DryEasy Plus alarm.
6.1 Rengøring af sensoren
After each use, especially if the sensor has detected urine, it is crucial to clean it:
- Gently wipe the sensor with a damp klud og mild sæbe.
- Rinse with clean water and ensure all soap residue is removed.
- Vigtig: Allow the sensor to air dry completely before re-attaching it to underwear. Moisture on the sensor can trigger false alarms.
- Do not immerse the Transmitter unit in water.
6.2 Udskiftning af batteri
The Receiver and Transmitter units are powered by AAA batteries. A low battery indicator on the Receiver will signal when batteries need replacement.
- When the low battery indicator activates, replace both AAA batteries in the affected unit.
- Always replace both batteries at the same time with new alkaline batteries.
- Bortskaf brugte batterier i henhold til lokale regler.
6.3 Opbevaring
When not in use for extended periods, remove batteries from both units and store the alarm in a cool, dry place.
7. Fejlfinding
If you encounter issues with your DryEasy Plus Wireless Bedwetting Alarm, refer to the following troubleshooting guide:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Alarm does not sound/vibrate when wetness is detected. |
|
|
| Alarm triggers without wetness (false alarm). |
|
|
| Alarm sounds/vibrates but user does not wake up. |
|
|
| Alarm does not stop after pressing Reset button. |
|
|
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | DE300 |
| Mærke | DRYEASY |
| Strømkilde | Batteridrevet |
| Batteritype | 2 x AAA Alkaline batteries (per unit) |
| Voltage | 1.5 volt (DC) |
| Kontrolmetode | Røre |
| Støjniveau | 85 dB |
| Monteringstype | Tabletop Mount (Receiver) |
| Maksimal trådløs rækkevidde | 30 meter |
| Sensor Technology | Kontakt sensor |
| Varens vægt | 11.6 g (samlet pakke) |
| Pakkedimensioner | 9.1 x 5.39 x 1.34 tommer |
| Farve | White (Receiver), Blue (Transmitter) |
| UPC | 634654799074, 634654799067 |
| Fabrikant | Marvelworks Ltd. |
9. Garanti og support
9.1 Garantioplysninger
Specific warranty details for the DryEasy Plus Wireless Bedwetting Alarm are not provided in this manual. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.
9.2 Kundesupport
For further assistance, technical support, or inquiries, please contact:
- Webwebsted: www.bedwettingsolving.com
- E-mail: info@bedwettingsolving.com
- Fabrikant: Marvelworks Ltd.
