Petrainer Dog Training Collar with Remote

Produkt overview

The Petrainer Dog Training Collar with Remote is designed to assist pet owners in training their dogs effectively and humanely. This electronic training collar offers multiple stimulation modes to help correct various behavioral issues, ensuring a well-behaved companion.

Nøglefunktioner omfatter:

• 3 træningstilstande: Static, vibration, and beep with adjustable intensity levels (0-100) for static and vibration.
• Rainproof Receiver: Allows for training in various weather conditions.
• Genopladeligt: Both the remote transmitter and receiver collar are rechargeable simultaneously.
• 1000 fod fjernbetjeningsrækkevidde: Giver ample range for training in diverse environments.
• Behavioral Aid: Effective for correcting barking, walking, sitting, aggression, and other disobedience.

Opsætning

Pakkens indhold

Figure 1: Contents of the Petrainer Dog Training Collar package.

Ved udpakning skal du kontrollere, at alle komponenter er til stede:

• 1 x fjernbetjening
• 1 x modtagerhalsbånd
• 1 x Nylon Belt
• 3 Sets of Contact Points (short, medium, long)
• 1 x testpære
• 1 x vekselstrømsadapter
• 1 x Splitter Charging Cable
• 1 x brugermanual

Opladning af enheden

Figure 2: Both the remote and receiver can be charged at the same time.

Before first use, fully charge both the remote transmitter and the receiver collar. Connect the splitter charging cable to the AC adapter, then plug the two ends of the splitter cable into the charging ports on the remote and receiver. Plug the AC adapter into a wall outlet. The indicator lights will show charging status.

Parring af fjernsender og modtagerhalsbånd

To ensure proper communication between the remote and collar, follow these pairing steps:

1. Turn on the remote transmitter by pressing the 'M' button for 2 seconds.
2. Turn on the receiver collar by pressing its power button once. You will hear a beep.
3. Immediately press and hold the receiver's power button again until you hear a second beep. The indicator light will flash.
4. While the receiver's light is flashing, press the 'Y' button on the remote transmitter. The receiver will beep, indicating successful pairing.
5. If you have multiple collars, use the '1/2' button on the remote to switch channels and repeat the pairing process for each additional collar.

Attaching the Collar to Your Dog

Figure 3: The adjustable nylon collar ensures a comfortable and secure fit.

Proper fit is crucial for the collar's effectiveness and your dog's comfort. Ensure the contact points are positioned directly against your dog's skin on the underside of their neck. You should be able to fit two fingers snugly between the collar strap and your dog's neck. Adjust the nylon strap as needed.

Select the appropriate contact points based on your dog's coat length. Longer hair may require longer contact points to ensure proper contact with the skin.

Betjening af træningshalsbåndet

Træningstilstande

The Petrainer collar offers three distinct training modes:

• Bip-tilstand: Provides an audible tone. Ideal for initial training and gaining your dog's attention.
• Vibrationstilstand: Delivers a non-harmful vibration. Useful for dogs that respond well to tactile cues or as a step up from the beep. Intensity is adjustable from 0-100.
• Static Electric Mode: Provides a static stimulation. This mode should be used as a last resort and at the lowest effective level. Intensity is adjustable from 0-100.

To switch between modes, press the 'Mode' button on the remote transmitter. The remote's screen will display the active mode icon.

Justering af intensitetsniveauer

For Vibration and Static modes, you can adjust the intensity from 0 to 100 using the up and down arrow buttons on the side of the remote. Always start with the lowest level and gradually increase until your dog responds.

Lommelygte funktion

The remote transmitter includes a small flashlight. Press the flashlight button (usually indicated by a light bulb icon) to activate it. This can be useful for visibility in low-light conditions.

Opretholdelse

Vandmodstand

Figure 4: The receiver collar is designed to be rainproof, allowing for outdoor training.

The receiver collar is rainproof, meaning it can withstand splashes and light rain. However, it is not designed for submersion in water. Ensure the charging port cover is securely closed when not charging to maintain water resistance.

Rengøring og pleje

Regularly inspect the collar and contact points for any signs of irritation on your dog's skin. Clean the contact points and the area around them with a damp cloth to prevent dirt buildup. Ensure the collar is dry before charging.

Fejlfinding

If you encounter issues with your Petrainer training collar, consider the following common solutions:

• Intet svar fra halsbåndet:
  • Sørg for, at både fjernbetjeningen og modtageren er fuldt opladet.
  • Verify that the remote and receiver are properly paired (refer to the Pairing section).
  • Check that the contact points are making proper skin contact. Adjust the collar or use longer contact points if necessary.
• Weak or Inconsistent Stimulation:
  • Increase the intensity level on the remote.
  • Ensure the contact points are clean and free of debris.
  • Confirm proper fit of the collar.
• Collar Not Holding Charge:
  • Sørg for, at opladningskablet og adapteren fungerer korrekt.
  • Check the charging port for any damage or debris.

For further assistance, please refer to the customer support information in the Warranty & Support section.

Specifikationer

Garanti & Support

Garanti: Petrainer offers a 1-YEAR WARRANTY. Register your product after purchase to receive an EXTENDED 3 YEARS Warranty. For any issues with your dog bark collar, contact iPets US Based Customer Service.

Kundeservice:

• Telefon: 1-866-877-7949
• Availability: Mon-Fri 8:00 AM - 6:00 PM (EST)

(Phone & Email support available 5 Days a Week)