RISCO RK150DTG300B Dual Technology Loftdetektor Brugermanual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your RISCO RK150DTG300B Dual Technology Ceiling Detector. This advanced security device offers 360° coverage, combining passive infrared (PIR) and microwave (MW) technologies for reliable motion detection in various environments.

For optimal performance and safety, please read this manual thoroughly before installation and use. Keep it for future reference.

2. Sikkerhedsoplysninger

WARNING: Risk of electric shock. Installation should only be performed by qualified personnel.

• Afbryd strømmen, før du udfører nogen form for installation eller vedligeholdelse.
• Sørg for, at al ledningsføring overholder lokale elektriske forskrifter og regler.
• Udsæt ikke enheden for fugt, ekstreme temperaturer eller direkte sollys.
• Denne enhed er kun designet til indendørs brug.
• Tampering with the device may void the warranty and compromise security.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• RISCO RK150DTG300B Dual Technology Ceiling Detector Unit
• Monteringsudstyr (skruer, ankre)
• Brugervejledning (dette dokument)

Figur 1: Forside view of the RISCO RK150DTG300B Dual Technology Ceiling Detector.

4. Opsætning og installation

The RK150DTG300B is designed for ceiling mounting to provide optimal 360° detection coverage.

4.1. Valg af sted

• Choose a central location on the ceiling within the area to be protected.
• Avoid mounting near heat sources, air conditioning vents, or areas with significant air drafts that could cause false alarms.
• Sørg for, at detektionsområdet er frit for store forhindringer.

4.2. Montering af detektoren

1. Carefully separate the detector's base from its cover.
2. Position the base on the chosen ceiling location and mark the drilling points.
3. Drill holes and insert appropriate anchors if necessary.
4. Secure the detector base to the ceiling using the provided screws.

Figur 2: Eksample of detector mounting points and internal components.

4.3. Ledninger

The RK150DTG300B is powered by an electrical cable. Connect the detector to your security system's control panel according to the panel's instructions and the detector's terminal markings.

• Strømtilslutning: Tilslut strømforsyningsledningerne til de dertil indrettede terminaler.
• Alarmoutput: Connect the alarm output to the appropriate zone input on your control panel.
• Tamper Output: Tilslut tamper output to a 24-hour tamper zone on your control panel. The detector features anti-removal and anti-opening tampeh beskyttelse.
• EOL Resistors: Integrated End-Of-Line (EOL) resistors are selectable via jumpers. Refer to your control panel's manual for the required EOL resistor values and configure the detector accordingly.

4.4. Configuration and Testing

• Anti-Cloak Technology (ACT): This feature enhances detection capabilities by identifying attempts to mask the infrared signal.
• Green Line Feature: Allows for the deactivation of the microwave (MW) channel when the security system is disarmed, reducing power consumption and potential interference. This is typically configured during installation.
• Gåtest: After installation, perform a walk test to verify the detector's coverage and sensitivity. Walk through the entire protected area to ensure the detector triggers an alarm. Adjust sensitivity if necessary (refer to specific jumper settings or potentiometers if available on the device, though not explicitly detailed in product description).

5. Betjening af detektoren

The RISCO RK150DTG300B operates automatically once properly installed and powered. It continuously monitors the protected area using its dual technology sensors.

• Dobbelt teknologi: The detector combines Passive Infrared (PIR) and Microwave (MW) detection. Both technologies must typically be triggered simultaneously to generate an alarm, significantly reducing false alarms.
• 360° dækning: The ceiling mount design provides a full 360-degree detection pattern, covering an area up to 13 meters in diameter.
• Tampeh Beskyttelse: The integrated anti-removal and anti-opening tamper switches will trigger an alarm if the detector is tampered with or forcibly removed from its mounting location.

6. Vedligeholdelse

To ensure the long-term reliability and performance of your detector, follow these maintenance guidelines:

• Rensning: Rengør detektorens linse og hus med jævne mellemrum med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Regelmæssig test: Perform a walk test at least once a year, or as recommended by your security system provider, to confirm proper operation.
• Inspektion: Visually inspect the detector for any signs of damage or loose connections.

7. Fejlfinding

If you experience issues with your RK150DTG300B detector, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact your security system installer or RISCO technical support.

8. Specifikationer

9. Garanti og support

For warranty information, please refer to the terms and conditions provided by your point of purchase or contact RISCO Group directly. RISCO Group products are typically covered by a limited warranty against defects in materials and workmanship.

For technical support, installation assistance, or further inquiries, please contact your authorized RISCO installer or visit the official RISCO Group webwebsted for supportressourcer.

Fabrikant: RISCO Gruppen

Webwebsted: www.riscogroup.com