SKYRC iMAX B6AC V2 AC/DC Dual Power Professionel LiPo Batteri Balanceoplader/Aflader Brugermanual

1. Introduktion

The SKYRC iMAX B6AC V2 is an advanced, microprocessor-controlled charge/discharge station designed for a wide range of battery types. This device features an integral equalizer for Lithium-Polymer (LiPo), Lithium High Voltage (LiHV), Lithium Iron Phosphate (LiFe), and Lithium-Ion (LiIon) batteries, supporting up to six cells. It also handles Nickel-Metal Hydride (NiMH), Nickel-Cadmium (NiCd), and Lead Acid (Pb) batteries. The B6AC V2 offers both AC and DC input power options, making it versatile for various charging environments. This manual provides detailed instructions for safe and efficient operation of your charger.

2. Sikkerhedsforanstaltninger

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in property damage, personal injury, or death.

• Never leave the charger unattended during operation. Always monitor the charging process.
• Sørg for, at opladeren bruges i et godt ventileret område, væk fra brandfarlige materialer.
• Verify that the battery type, cell count, voltage, and current settings match the battery being charged. Incorrect settings can cause fire or explosion.
• Avoid short-circuiting the output terminals. Always connect the charger to the battery before connecting to power.
• Opbevar opladeren og batterierne utilgængeligt for børn og kæledyr.
• Do not charge damaged, swollen, or leaking batteries.
• Use only genuine SKYRC accessories and power adapters.
• Disconnect the power supply immediately if any abnormal behavior is observed.

3. Produktet er slutview

The SKYRC iMAX B6AC V2 charger is designed for precision and versatility. Key features include:

• Dobbelt strømindgang: Operates on both AC (100-240V) and DC (11-18V) power.
• Multi-kemi-understøttelse: Compatible with LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, and Pb batteries.
• Integrated Balancer: Balancerer individuelle cellevolumenertages for Lithium batteries (1-6S).
• Flere driftstilstande: Charge, Balance Charge, Fast Charge, Storage, Discharge, Re-Peak, Cycle.
• Avancerede sikkerhedsfunktioner: Automatic charging current limit, capacity limit, temperature threshold, processing time limit.
• Datalagring: Stores up to 10 charge/discharge profiles.
• PC tilslutning: Allows for PC control and firmware upgrades.
• Battery Meter Functions: Measures Lithium battery voltage og indre modstand.

Figur 1: Front view of the SKYRC iMAX B6AC V2 charger. This image displays the blue metallic casing, the LCD screen showing "LiPo BALANCE 5.0A 22.2V (6S)", and the control buttons labeled "BATT/PROG", "DEC", "INC", and "ENTER". The right side features balance ports for 2 to 6 cells and output terminals.

4. Opsætning

4.1 Tilslutning til strøm

The B6AC V2 supports both AC and DC power inputs.

• Vekselstrøm (100-240V): Connect the supplied AC power cord to the AC input port on the side of the charger, then plug it into a wall outlet.
• DC Power (11-18V): Connect a DC power source (e.g., a 12V car battery or a regulated DC power supply) to the DC input ports on the side of the charger. Ensure correct polarity.

4.2 Tilslutning af batteriet

1. Identify the correct charging cable for your battery type.
2. Connect the main charging cable to the output terminals (red for positive, black for negative) on the charger.
3. For Lithium batteries, also connect the balance lead of the battery to the corresponding balance port on the right side of the charger. Ensure the correct cell count port is used (e.g., 6S battery to the 6-cell port).
4. Connect the other end of the main charging cable to your battery.

5. Betjeningsvejledning

5.1 Grundlæggende navigation

The charger is operated using four buttons:

• BATT/PROG: Enters the program selection menu or returns to the previous menu.
• DEC (<): Decreases values or moves left/up in menus.
• INKLUDERET (>): Increases values or moves right/down in menus.
• ENTER/START: Confirms selections or starts/stops a process (long press to start/stop).

5.2 Programvalg

Tryk på på hovedskærmen BATT/PROG to cycle through the main program menus:

• LiPo BATT
• NiMH-batteri
• Pb BATT
• GEM DATA
• INDLÆS DATA
• USER SET PROGRAM
• BATTERIMÅLER
• INDVENDIG MODSTAND

5.3 Charging Lithium Batteries (LiPo/LiFe/LiIon/LiHV)

After selecting the appropriate Lithium battery type (e.g., LiPo BATT), you can choose from several modes:

1. BALANCE CHARGE: Recommended for regular charging. This mode charges and balances individual cell voltages simultaneously. Set the charge current and cell count. Long press ENTER/START to confirm and begin.
2. OPLADE: Charges the battery without balancing. Use with caution. Set current and cell count. Long press ENTER/START at begynde.
3. HURTIG OPLADNING: Charges the battery faster than balance charge, but balancing is less precise. Set current and cell count. Long press ENTER/START at begynde.
4. OPBEVARING: Oplader eller aflader batteriet til et sikkert opbevaringsvolumentage (e.g., 3.85V/cell for LiPo). Set current and cell count. Long press ENTER/START at begynde.
5. UDLADNING: Aflader batteriet til et indstillet volumtage. Set discharge current and final voltage. Langt tryk ENTER/START at begynde.

5.4 Charging NiMH/NiCd Batteries

After selecting NiMH BATT, choose a mode:

1. OPLADE: Charges the battery. Set charge current. Long press ENTER/START at begynde.
2. AUTO CHARGE: Automatically adjusts charge current based on battery condition. Set maximum current. Long press ENTER/START at begynde.
3. UDLADNING: Discharges the battery. Set discharge current and final voltage. Langt tryk ENTER/START at begynde.
4. RE-PEAK: Charges the battery, then discharges and recharges to maximize capacity. Set charge current. Long press ENTER/START at begynde.
5. CYKLUS: Performs a charge/discharge or discharge/charge cycle multiple times. Set cycle count, charge/discharge current. Long press ENTER/START at begynde.

5.5 Charging Pb (Lead Acid) Batteries

After selecting Pb BATT, choose a mode:

1. OPLADE: Charges the battery. Set charge current and voltage. Langt tryk ENTER/START at begynde.
2. UDLADNING: Discharges the battery. Set discharge current and final voltage. Langt tryk ENTER/START at begynde.

5.6 User Set Program

This menu allows customization of various charger parameters, including:

• Safety Timer (e.g., 120 minutes)
• Capacity Cut-off (e.g., 5000mAh)
• Temperature Cut-off (requires optional temperature sensor)
• Indgangseffekt lav Voltage Afskæring
• Terminal Voltage Control (TVC) for Lithium batteries

5.7 Battery Meter and Internal Resistance

The charger can display the total voltage og individuel celle voltages of Lithium batteries, as well as their internal resistance. Navigate to these options from the main menu and connect the battery's balance lead.

6. Vedligeholdelse

• Hold opladeren ren og fri for støv og snavs. Brug en blød, tør klud til rengøring.
• Opbevar opladeren på et køligt, tørt sted, når den ikke er i brug.
• Regularly inspect cables and connectors for damage. Replace any worn or damaged components immediately.
• Firmware updates may be available from the SKYRC website. Connect the charger to a PC via a USB cable (not included) to perform updates.

7. Fejlfinding

8. Specifikationer

• Input bindtage: AC 100-240V / DC 11-18V
• Max Charge Power: 50W
• Max Discharge Power: 5W
• Opladningsaktuelt område: 0.1-6.0A
• Afladningsstrømområde: 0.1-2.0A
• LiPo/LiFe/LiIon/LiHV Cell Count: 1-6S
• NiMH/NiCd Cell Count: 1-15S
• Pb Batterivolumentage: 2-20V
• Balancestrøm: 300mA/celle
• Dimensioner: Cirka 135 x 144 x 36 mm (5.32 x 5.67 x 1.42 tommer)
• Vægt: Approximately 632 g (2.2 pounds)

9. Garanti og support

For warranty information and technical support, please refer to the official SKYRC webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis.