Eurotime 5999007 Radio-Controlled Wall Clock

Indledning

Thank you for choosing the Eurotime Radio-Controlled Wall Clock. This clock is designed for maximum precision and convenience, automatically adjusting to the exact time, including daylight saving and standard time changes, by receiving the DCF77 transmitter signal. Its timeless design with a matte black stainless steel casing and authentic glass cover makes it an ideal addition to any kitchen, dining room, living room, or office.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new clock to ensure optimal performance and longevity.

Opsætning

1. Batteriinstallation

Your Eurotime wall clock requires one 1.5V AA battery (not included). Follow these steps to install the battery:

1. Find batterirummet på bagsiden af ​​uret.
2. Åbn batterirummets dæksel.
3. Insert one 1.5V AA battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Luk batterirummets dæksel forsvarligt.

Figur 1: Bagside view of the clock with battery compartment.

2. Indledende synkronisering

After battery installation, the clock will automatically search for the DCF77 radio signal. This process may take a few minutes. During synchronization, the hands will typically move to the 12 o'clock position and then adjust to the correct time once the signal is received.

• Place the clock near a window or in an area with good radio reception, away from electronic devices that might cause interference.
• Allow the clock sufficient time (up to 24 hours in some cases, especially during initial setup or after a long period of no signal) to receive the signal and set itself.
• Once synchronized, the clock will display the precise time and automatically adjust for daylight saving time changes.

Betjeningsvejledning

Automatisk tidsjustering

The Eurotime radio-controlled wall clock is designed for hassle-free operation. It continuously receives the DCF77 radio signal from Mainflingen, Germany, which ensures atomic-clock precision. This means you will never need to manually set the time, including adjustments for daylight saving time (summer/winter time).

• The clock automatically checks and updates its time daily.
• In case of signal loss, the clock will continue to run on its internal quartz movement and attempt to re-synchronize periodically.

Figur 2: Forside view af uret.

Opretholdelse

• Rensning: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the casing eller glas.
• Udskiftning af batteri: Replace the AA battery annually or when the clock hands stop moving or become erratic. Always use a fresh, high-quality 1.5V AA battery. Dispose of used batteries responsibly.
• Placering: Avoid placing the clock in direct sunlight or near extreme temperature changes, as this can affect its performance and longevity.

Fejlfinding

Specifikationer

Garanti og support

Eurotime products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the specific warranty terms provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official Eurotime webwebsted eller kontakt deres kundeserviceafdeling.

Note: As a traditional family company based in Germany, Eurotime stands for decades of experience and high-quality products.