Blackvue DR430/DR450/DR470/DR590/DR590W frontkameramonteringsvejledning

1. Introduktion

This manual provides detailed instructions for the installation and maintenance of your Blackvue Front Camera Mount. This accessory is designed to securely attach your compatible Blackvue dashcam to your vehicle's windshield, ensuring optimal recording performance.

2. Produktet er slutview

The Blackvue Front Camera Mount (Model: 5823763600) is a replacement or additional mounting bracket for specific Blackvue dashcam models. It features a durable design with a strong double-sided adhesive for reliable attachment to a vehicle's window. The mount is engineered to hold the camera securely while allowing for easy insertion and removal of the dashcam unit.

Figur 2.1: The Blackvue Front Camera Mount, showing its cylindrical camera housing and flat adhesive base.

Kompatible modeller:

• Blackvue DR430 Series Front Camera
• Blackvue DR450 Series Front Camera
• Blackvue DR470 Series Front Camera
• Blackvue DR590 Series Front Camera
• Blackvue DR590W Series Front Camera

3. Pakkens indhold

Pakken indeholder typisk:

• 1 x Blackvue Front Camera Mount
• 1 x Double-sided Adhesive Tape (pre-applied or separate)

Figur 3.1: Side view of the mount, highlighting the red protective film over the double-sided adhesive tape.

4. Opsætning og installation

Follow these steps to properly install the Blackvue Front Camera Mount and your dashcam.

1. Vælg en placering: Select a suitable location on your vehicle's windshield. Ensure the chosen spot does not obstruct your view of the road and allows the dashcam to capture a clear, unobstructed view. The ideal position is typically behind the rearview spejl.
2. Rengør overfladen: Thoroughly clean the selected area on the windshield with an alcohol wipe or glass cleaner. Allow the surface to dry completely. A clean, dry surface is crucial for strong adhesion.
3. Forbered monteringen: If the double-sided adhesive tape is not already applied to the mount, attach it firmly to the flat base of the mount. Then, carefully peel off the protective film from the double-sided adhesive tape on the mount.
4. Fastgør beslaget: Press the mount firmly against the cleaned windshield surface. Apply steady pressure for at least 30 seconds to ensure maximum adhesion. Avoid repositioning the mount once it has been applied, as this can weaken the adhesive.
5. Insert the Dashcam: Slide your compatible Blackvue front camera into the cylindrical housing of the mount until it clicks securely into place. Ensure the camera lens is facing forward and is level with the horizon.
6. Secure the Camera (if applicable): Some Blackvue models feature a 'LOCK' button or mechanism on the mount to further secure the camera. If your mount has this, engage the lock.

Figur 4.1: Top view of the mount, showing the "LOCK" button for securing the dashcam.

Note: For optimal adhesion, it is recommended to wait at least 24 hours after installation before driving, especially in extreme temperatures.

5. Vedligeholdelse

To ensure the longevity and proper function of your Blackvue Front Camera Mount:

• Rensning: Periodically wipe the mount with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners, as these can damage the material or adhesive.
• Kontrol af klæbemiddel: Occasionally check the adhesion of the mount to the windshield. If the mount feels loose, it may need to be re-secured with new double-sided adhesive tape.
• Temperaturovervejelser: Extreme temperatures can affect the adhesive. If installing in very cold conditions, ensure the windshield is warmed first.

6. Fejlfinding

Her er løsninger på almindelige problemer, du kan støde på:

• Mount is not sticking to the windshield:
  • Ensure the windshield surface was thoroughly cleaned and dry before application.
  • Verify that the protective film was completely removed from the adhesive tape.
  • Apply firm and sustained pressure for at least 30 seconds during installation.
  • If the adhesive is old or has been repositioned, replace it with new, high-quality double-sided adhesive tape.
• Dashcam feels loose in the mount:
  • Ensure the dashcam is fully inserted into the mount until it clicks.
  • If your mount has a 'LOCK' button, ensure it is engaged.
  • Verify that the mount is compatible with your specific Blackvue dashcam model.

7. Specifikationer

8. Garanti og support

For specific warranty information and technical support, please refer to the documentation included with your original Blackvue dashcam or visit the official Blackvue website. This mount is an accessory and its warranty may be covered under the main dashcam unit's warranty or as a separate accessory purchase.

For further assistance, please contact Blackvue customer support through their official channels.