Roca NAIA MEZ LAV ALTO LISO High Basin Brugermanual til blandingsbatteri

Indledning

This manual provides essential information for the installation, operation, and maintenance of your Roca NAIA MEZ LAV ALTO LISO high basin mixer tap. Please read these instructions carefully before installation and retain them for future reference.

Image 1: The Roca NAIA MEZ LAV ALTO LISO high basin mixer tap, featuring a sleek chrome finish and a single lever for water control.

Sikkerhedsoplysninger

Always ensure the main water supply is turned off before beginning any installation or maintenance work. If you are unsure about any part of the installation process, consult a qualified plumber.

• Brug ikke slibende rengøringsmidler eller skuresvampe på forkromet overflade.
• Sørg for, at alle forbindelser er vandtætte for at forhindre lækager.
• Beskyt produktet mod frost.

Opsætning og installation

The Roca NAIA MEZ LAV ALTO LISO tap is designed for single-hole deck mounting. Installation should be performed by a competent individual or a qualified professional.

Inkluderede komponenter:

• Mixer tap unit
• Flexible connection hoses (G 3/8" thread)
• Mounting hardware (M8 bolt)
• Click-clack drain

Nødvendige værktøjer (ikke inkluderet):

• Justerbar skruenøgle
• Skruetrækker
• Tætningsbånd (PTFE-tape)

Installationstrin:

1. Forbered B'etasin: Ensure the mounting hole on your basin is clean and free of debris. The tap requires a single hole for installation.
2. Attach Flexible Hoses: Screw the flexible connection hoses into the base of the tap unit. Hand-tighten first, then use a wrench for a final snug turn, ensuring not to overtighten.
3. Monter hanen: Insert the tap unit into the basin hole. From underneath the basin, secure the tap using the provided mounting hardware (washer and nut) onto the M8 bolt. Tighten securely to prevent movement.
4. Tilslut vandforsyning: Connect the flexible hoses to your hot and cold water supply lines. The hose with the red marking typically connects to hot water, and the blue marking to cold water. Use sealant tape on the threads and tighten connections with a wrench.
5. Install Click-Clack Drain: Follow the instructions provided with the click-clack drain for proper installation into the basin's drain hole. Ensure a watertight seal.
6. Test for lækager: Slowly turn on the main water supply. Check all connections for leaks. Operate the tap to ensure proper water flow and temperature mixing.

Image 2: Technical diagram showing the dimensions of the Roca NAIA MEZ LAV ALTO LISO tap and its installation components, including the M8 bolt and G 3/8" flexible hoses.

Betjeningsvejledning

The Roca NAIA MEZ LAV ALTO LISO tap features a single lever for controlling both water flow and temperature.

• Vandflow: Lift the lever upwards to increase water flow. Push it downwards to decrease and turn off the water.
• Temperaturkontrol: Move the lever to the right for cold water and to the left for hot water. The tap is designed to open in cold water when the lever is in the front position, promoting energy saving.

Note: This tap is designed to save water and energy, with a flow rate of 5 liters per minute at 3 bar pressure.

Pleje og vedligeholdelse

Regular cleaning and proper maintenance will ensure the longevity and appearance of your Roca tap.

Rengøring af overfladen:

• Clean the chrome surface with a soft cloth and mild soap or a non-abrasive liquid cleaner specifically designed for chrome finishes.
• Skyl grundigt med rent vand og tør straks med en blød klud for at undgå vandpletter.
• Må ikke bruges abrasive cleaners, scouring pads, acids, or solvents, as these can damage the chrome finish.

Rengøring af belufteren:

Periodically unscrew the aerator at the tip of the spout and clean any accumulated debris or limescale. Rinse it under running water and reattach it securely.

Fejlfinding

Tekniske specifikationer

• Model: NAIA MEZ LAV ALTO LISO
• Modelnummer: A5A3796C00
• Mærke: Roca
• Overfladefinish: Chrome
• Materiale: Brass, Stainless Steel, Zinc
• Installationsmetode: Single-hole, Deck-mounted
• Antal håndtag: 1
• Håndtag Materiale: Messing
• Handle Placement: Centrum
• Flowhastighed: 5 L/min (at 3 bar)
• Særlige funktioner: Water and energy saving, Cold water opening in front position, Lightweight
• Produktdimensioner: 9.4 x 26 x 46.6 cm (Længde x Bredde x Højde)
• Varens vægt: 2.62 kilo
• Inkluderede komponenter: Click-clack drain, Flexible connection hoses

Garantioplysninger

Specific warranty details for Roca products may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for detailed warranty terms and conditions. Generally, Roca products are covered against manufacturing defects.

Kundesupport

For further assistance, technical support, or to inquire about spare parts, please contact Roca customer service or visit the official Roca website. When contacting support, please have your product model number (A5A3796C00) and purchase details available.

Official Roca Webwebsted: www.roca.com