TCP dæmpbar 9W 4100K BR30 LED-pære brugsanvisning

1. Produktet er slutview

The TCP BR30 ENERGY STAR® qualified dimmable 9-watt LED bulb is designed to provide efficient and long-lasting illumination. This bulb generates light output comparable to many 65-watt halogen bulbs while consuming significantly less energy. It is engineered for environmental safety, containing no lead or mercury, which simplifies disposal.

This LED bulb boasts a very long operational life, rated to maintain at least 70% of its initial light output after 25,000 hours of use.

Image 1.1: The TCP BR30 LED Bulb, showcasing its standard BR30 shape and E26 screw base. The bulb is white with a frosted diffuser.

2. Vigtige sikkerhedsoplysninger

Læs og forstå alle instruktioner, før du installerer eller bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.

• ADVARSEL: To avoid electric shock, always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
• Do not "hot swap" this bulb. Always turn off the fixture before replacing an existing bulb.
• This bulb is not recommended for use in fully enclosed fixtures because heat buildup will shorten its operational life. Ensure adequate ventilation around the bulb.
• Velegnet til damp steder.
• Do not use with standard dimmers unless specifically rated for LED compatibility. Use only with dimmers designed for LED products to ensure proper performance and avoid damage.
• Pæren må ikke skilles ad eller ændres. Der er ingen dele indeni, som brugeren kan servicere.
• Sørg for, at pæren er skruet forsvarligt ind i fatningen.

3. Installationsvejledning

Follow these steps to properly install your TCP BR30 LED bulb:

1. Sluk for strømmen: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the circuit breaker or fuse box controlling the fixture.
2. Fjern gammel pære: Skru forsigtigt den eksisterende pære ud af armaturet. Lad den køle af, hvis den har været i brug for nylig.
3. Inspekter armatur: Check the fixture socket for any damage or debris. Ensure it is clean and dry.
4. Installer ny pære: Gently screw the TCP BR30 LED bulb into the socket until it is finger-tight. Do not overtighten.
5. Gendan strøm: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch to test the new bulb.

4. Betjening

This TCP BR30 LED bulb is designed for standard on/off operation and is fully dimmable. For optimal dimming performance, use with LED-compatible dimmers. Using non-LED compatible dimmers may result in flickering, reduced performance, or damage to the bulb.

The bulb provides a cool white light with a color temperature of 4100 Kelvin, suitable for various indoor applications.

5. Care and Disposal

Rensning: Sørg for, at strømmen er slukket, og at pæren er kold, inden rengøring. Tør pæren af ​​med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.

Bortskaffelse: This TCP LED bulb contains no lead or mercury, making it environmentally safer for disposal compared to traditional fluorescent bulbs. Please dispose of the bulb according to local regulations for electronic waste or general waste, as applicable in your region.

6. Fejlfinding af almindelige problemer

7. Tekniske specifikationer

8. Garanti og kundesupport

For information regarding product warranty, returns, or technical assistance, please contact TCP customer support directly. Refer to the product packaging or the official TCP webwebstedet for de seneste kontaktoplysninger og garantivilkår.

Fabrikant: TCP

Webwebsted: Visit the TCP Store on Amazon