Indledning
This instruction manual provides detailed guidance for the setup, operation, and maintenance of your Amplicomms BKR-33 Universal Remote Control. Designed for ease of use, particularly for seniors or individuals with limited motor skills, this remote features large, illuminated buttons and a convenient learning function. Please read this manual thoroughly to ensure proper use and to maximize the functionality of your device.
Produkt overview
De Amplicomms BKR-33 is a universal remote control capable of operating up to four different devices, including TVs, stereo systems, SAT receivers, and radios. Its key features include:
- Large, Illuminated Buttons: For enhanced visibility and ease of pressing.
- Læringsfunktion: Allows copying functions directly from your original remote controls.
- Hukommelsesretention: Settings are retained even after battery replacement.
- Ergonomisk design: Behagelig at holde og betjene.
Figur 1: Amplicomms BKR-33 Universal Remote Control. This image shows the white remote control with large, clearly labeled buttons for power, numbers, volume, and channel control. The Amplicomms logo is visible at the bottom.
Opsætning
1. Batteriinstallation
- Find batterirummet på bagsiden af fjernbetjeningen.
- Åbn batterirummets dæksel.
- Isæt to AAA-batterier (medfølger ikke), og sørg for at polariteten (+/-) vender korrekt.
- Luk batterirummets dæksel forsvarligt.
2. Learning Function (Copying from Original Remote)
The BKR-33 remote learns functions directly from your existing remote controls. This process needs to be done for each button you wish to program.
- Placer Amplicomms BKR-33 and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 2-5 cm.
- Press and hold the desired device button (e.g., TV, SAT) on the BKR-33 for approximately 3 seconds until the indicator light flashes slowly.
- Press the button on the BKR-33 that you wish to program (e.g., Power button). The indicator light will now flash rapidly.
- Press and hold the corresponding button on your original remote control (e.g., Power button) until the indicator light on the BKR-33 flashes three times and then stays on. This indicates successful learning.
- Repeat steps 3 and 4 for all other buttons you wish to program for that device.
- To exit learning mode, press the device button again or wait for 10 seconds.
Note: If the indicator light does not flash as described, ensure batteries are fresh and the remotes are properly aligned. Some original remotes may have weaker IR signals, requiring closer proximity or a longer press.
Betjeningsvejledning
Once programmed, operating the Amplicomms BKR-33 is straightforward:
- Valg af enhed: Press the corresponding device button (e.g., TV, SAT) to select the device you wish to control. The indicator light will illuminate to confirm selection.
- Tænd/sluk-knap (⏻): Tænder eller slukker den valgte enhed.
- Number Buttons (0-9, *, #): For direct channel input or other numerical functions.
- Volume Buttons (Volume +, Volume -): Justerer lydstyrken på den valgte enhed.
- Channel Buttons (Channels ∧, Channels ∨): Skifter kanaler op eller ned.
- Illumination Button (💡): Activates the backlight for the buttons, improving visibility in low-light conditions.
- Favorite Buttons (♥1, ♥2): These buttons can be programmed for frequently used functions or favorite channels.
Opretholdelse
- Rensning: Tør fjernbetjeningen af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Udskiftning af batteri: When the remote's performance degrades, replace the AAA batteries. The remote retains its programming even after battery replacement, so no re-programming is necessary.
- Opbevaring: Opbevar fjernbetjeningen et tørt sted, væk fra direkte sollys og ekstreme temperaturer.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen reagerer ikke. | Døde eller forkert isatte batterier. | Udskift batterierne med nye AAA-batterier, og sørg for at polariteten vender korrekt. |
| Learning function fails or is inconsistent. | Remotes not aligned, too far apart, or original remote has a weak IR signal. | Ensure remotes are 2-5 cm apart and IR emitters are aligned. Try holding the original remote button longer. Ensure the BKR-33 is in learning mode. |
| Buttons control the wrong device. | Forkert enhed valgt. | Press the correct device button (TV, SAT, etc.) before operating. |
| Some functions are not working after programming. | Button not successfully learned or learned incorrectly. | Repeat the learning process for the specific non-working button. |
Specifikationer
| Mærke | Amplicomms |
| Modelnummer | 906436 |
| Modelnavn | Universelle Fernbedienung mit Großtasten (Universal Remote Control with Large Buttons) |
| Fabrikant | Audioline GmbH |
| Kompatible enheder | TV, stereo system, SAT receiver, radio |
| Maksimalt antal understøttede enheder | 4 |
| Særlige funktioner | Universal, Illuminated buttons, Learning function |
| Forbindelsesteknologi | Infrarød |
| Controller type | Knap kontrol |
| Batteritype | AAA (2 required, not included) |
| Produktdimensioner | 5 x 2.1 x 18.5 cm |
| Varens vægt | 122 g |
| ASIN | B01M6CLPML |
| GTIN | 04250711906436 |
Garanti og support
De Amplicomms BKR-33 Universal Remote Control comes with a to års garanti fra købsdatoen. Gem venligst din købsbevis i tilfælde af garantikrav.
For further assistance or technical support, please refer to the contact information provided with your product packaging or visit the official Amplicomms webwebsted.
