Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your EchoMaster PCAM-BS1-N Flexible Housing Self-Adhesive Blind Spot Camera. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Produkt overview
The EchoMaster PCAM-BS1-N is a versatile camera designed to enhance vehicle safety by providing a clear view of blind spots. Its flexible housing and self-adhesive mounting allow for discreet and secure placement. The camera is suitable for front, side, or rear view applikationer.
Nøglefunktioner:
- 1/4" CMOS Sensor: Provides clear image capture.
- 0.1 LUX Operation: Sikrer synlighed under dårlige lysforhold.
- IP67 Water/Debris Proof Rating: Designed for durability against environmental elements.
- Self-Adhesive Mounting: Gør installationen nem og sikker.
- 80° Viewvinkel: Offers a wide field of vision.
- Adjustable Camera Orientation: Allows for precise aiming after mounting.
Hvad er der i æsken
Pak forsigtigt indholdet ud, og sørg for, at alle genstande er til stede:
- EchoMaster PCAM-BS1-N Camera
- Instruktionsmanual
- Monteringshardware
- U-formet kameravinkeljusteringsværktøj
- Video Cable (approximately 20 feet)
- Strømkabel
Image: The EchoMaster PCAM-BS1-N camera, wiring harness, and user manual as packaged in the product box.
Opsætning og installation
The PCAM-BS1-N camera is designed for flexible installation on various surfaces using its self-adhesive backing. It is a wired camera and requires connection to a compatible monitor or head unit.
Installationstrin:
- Vælg monteringssted: Select a flat, clean surface for mounting. The camera can be used for front, side (e.g., under side mirrors), or rear applications.
- Ren overflade: Thoroughly clean the chosen mounting area to ensure optimal adhesion.
- Test Angle (Crucial Step): Before permanently adhering, temporarily position the camera and connect it to your monitor to verify the desired viewing angle. Once the self-adhesive is applied, repositioning may damage the adhesive.
- Påfør klæbemiddel: Remove the protective film from the self-adhesive backing and firmly press the camera onto the prepared surface.
- Adjust Camera Orientation: Use the provided U-shaped adjustment tool to fine-tune the camera's aim. Insert the tool into the small holes near the lens to rotate the camera module within its housing.
- Ledningsføring:
- Connect the camera's video output (RCA connector) to the video input of your compatible monitor or head unit. The included video cable is approximately 20 feet long.
- Connect the camera's power cable to a 12-volt power source in your vehicle. Ensure proper polarity.
- Sikker ledningsføring: Route and secure all cables away from moving parts, heat sources, and sharp edges to prevent damage.
Image: The EchoMaster PCAM-BS1-N camera, ready for installation.
Billede: Detaljeret view of the camera and its connection cables.
Betjeningsvejledning
Once properly installed and connected, the EchoMaster PCAM-BS1-N camera will provide video output to your connected monitor. The camera is designed for continuous operation or can be triggered by specific vehicle actions (e.g., reverse gear, turn signal) depending on how it is wired to your vehicle's electrical system and integrated with your monitor.
- Tænd: The camera activates when it receives 12V power.
- Viewing: The video feed will display on your connected monitor.
- Lav lys ydeevne: The 0.1 LUX sensitivity allows for clear images even in dimly lit environments.
- Vidvinkel View: 80 grader viewing angle helps minimize blind spots.
Opretholdelse
The EchoMaster PCAM-BS1-N camera is designed for minimal maintenance due to its durable construction and IP67 rating.
- Rensning: Rengør kameralinsen regelmæssigt med en blød kludamp klud til at fjerne snavs, støv eller vandpletter, der kan blokere viewUndgå slibende rengøringsmidler.
- Inspektion: Regularly check the camera's mounting and wiring for any signs of loosening or damage.
- Water/Debris Protection: The IP67 rating ensures protection against dust ingress and temporary immersion in water (up to 1 meter for 30 minutes). However, avoid high-pressure washing directly on the camera.
Fejlfinding
If you encounter issues with your PCAM-BS1-N camera, refer to the following common troubleshooting steps:
- Intet billede på skærmen:
- Verify that the camera is receiving power (12V).
- Check all video cable connections (RCA) between the camera and the monitor. Ensure they are securely plugged in.
- Confirm the monitor is set to the correct video input channel.
- Dårlig billedkvalitet:
- Rengør kameralinsen for at fjerne snavs, støv eller pletter.
- Ensure the protective film, if any, has been removed from the lens.
- Kontroller videokablet for knæk eller skader.
- Verify the monitor's display settings.
- Camera Not Sticking:
- Sørg for, at monteringsfladen er grundigt rengjort og tør inden påføring.
- The adhesive is designed for a single, firm application. If repositioned, new adhesive may be required.
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | PCAM-BS1-N |
| Sensortype | 1/4" CMOS |
| Minimum belysning | 0.1 LUX |
| Water/Debris Proof Rating | IP67 |
| Viewi vinkel | 80 grader (faktisk vinkel på View) |
| Linsetype | Vidvinkel, fast |
| Installationstype | Selvklæbende |
| Voltage | 12 volt |
| Connector Type | RCA |
| Kompatible enheder | Overvåge |
| Produktdimensioner | 6.5 x 4.5 x 2.5 tommer; 9.59 ounce |
| Revisionsnummer | 1621 |
Image: Product box highlighting key features.
Image: Product box with model and revision details.
Garantioplysninger
For specific warranty details, please refer to the warranty card included with your product or visit the official EchoMaster webwebsted. Gem din købsbevis til garantikrav.
Kundesupport
If you require further assistance or have questions not covered in this manual, please contact EchoMaster customer support. Contact information can typically be found on the product packaging or the official EchoMaster webwebsted.
