Intermatic MIL72ASTUZH-24 24 timers elektromekanisk tidsstyring brugermanual

Model: MIL72ASTUZH-24

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic MIL72ASTUZH-24 24 Hr. Electromechanical Time Control. This device is designed for surface mounting and features a synchronous SPDT switch with a 21 Amp capacity at 24 Volts. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Billede 1.1: Forside view of the Intermatic MIL72ASTUZH-24 Electromechanical Time Control. The device features a circular dial with hour markings (AM/PM) and numerous white trippers around its circumference, indicating its 24-hour timing capability. A clear plastic cover protects the dial, and the main body is white plastic, designed for surface mounting.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

Disconnect power at the circuit breaker or fuse box before installing or servicing the timer.
Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
Overskrid ikke den angivne voltage og amperage ratings (24 Volt, 21 Amps).
Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
This device is intended for indoor use unless otherwise specified for outdoor enclosures.

3. Produktet er slutview

The MIL72ASTUZH-24 is an electromechanical time control designed for precise 24-hour scheduling. Key features include:

24-timers opkald: Provides a full day's timing cycle.
Captive Trippers: Integrated trippers for setting ON/OFF times, eliminating the risk of losing them.
SPDT Switch: Single-Pole Double-Throw switch type for versatile control applications.
Synchronous Motor: Sikrer præcis tidtagning.
Overflademontering: Designed for easy installation on flat surfaces or DIN rail.

4. Opsætning og installation

4.1 Montering

Select a suitable mounting location that is clean, dry, and free from excessive vibration or temperature fluctuations.
For surface mounting, use appropriate screws to secure the timer housing to the desired surface. Ensure the timer is level.
Alternatively, the unit can be mounted on a DIN rail if applicable.

4.2 Ledningsføring

Refer to the wiring diagram provided on the unit or in the packaging for specific connections. General steps include:

Sørg for, at strømmen er afbrudt ved hovedafbryderen.
Connect the incoming 24 Volt power supply to the designated terminals.
Connect the load (device to be controlled) to the appropriate SPDT switch terminals (Common, Normally Open, Normally Closed) as required by your application.
Kontroller, at alle forbindelser er stramme og korrekte, før strømmen genoprettes.

5. Betjeningsvejledning

5.1 Indstilling af aktuel tid

Rotate the dial clockwise until the current time aligns with the time indicator arrow.
Ensure to distinguish between AM and PM hours on the 24-hour dial.

5.2 Indstilling af tænd/sluk-tider

The dial has captive trippers around its circumference. Each tripper represents a specific time interval.
To set an ON time, push the corresponding tripper segment outwards.
To set an OFF time, push the corresponding tripper segment inwards.
Multiple ON/OFF cycles can be set within a 24-hour period.

5.3 Manuel tilsidesættelse

Some models may include a manual override switch. Consult the specific product labeling for its presence and operation. This typically allows you to temporarily turn the controlled device ON or OFF, overriding the programmed schedule until the next programmed event.

6. Vedligeholdelse

The Intermatic MIL72ASTUZH-24 is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines:

Rensning: Tør regelmæssigt timerens yderside af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Inspektion: Annually inspect wiring connections for tightness and signs of wear or damage.
Ingen dele, der kan serviceres af brugeren: Do not attempt to open or repair the internal components of the timer. Refer all servicing to qualified personnel.

7. Fejlfinding

Problem	Mulig årsag	Løsning
Timeren virker ikke / Ingen strøm	Ingen strøm til enheden; udløst afbryder; løse ledninger.	Check power supply; reset circuit breaker; verify wiring connections.
Belastningen tænder/slukker ikke på programmerede tidspunkter	Incorrect time setting; trippers not set correctly; faulty load connection.	Verify current time setting; ensure trippers are pushed in/out correctly; check load wiring.
Timer motor not running	No power to motor; motor failure.	Check power supply to timer; if power is present and motor still not running, unit may require replacement.

8. Specifikationer

Attribut	Værdi
Mærke	Intermatic
Modelnummer	MIL72ASTUZH-24
Voltage	24 volt
Ampslette	21 Amps
Switch Type	SPDT (enkeltpolet dobbeltkast)
Montering	Surface / DIN Rail
Materiale til hus	Plast
Farve	Hvid
Produktdimensioner	2.06" D x 2.83" B x 4" H
Varens vægt	0.96 ounce
Antal indstillinger	3 (referring to tripper types or general settings)
UPC	061457313105

9. Garanti og support

9.1 Garantioplysninger

Intermatic products are typically covered by a limited warranty against defects in material and workmanship. For specific warranty terms and duration, please refer to the warranty card included with your product or visit the official Intermatic webwebstedet. Behold din købskvittering som købsbevis.

9.2 Kundesupport

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Intermatic Customer Support. Contact information can typically be found on the product packaging or the official Intermatic webwebsted.

Online ressourcer: www.intermatic.com

	Intermatic T105 24-timers tidsafbryder: Installations-, ledningsførings- og betjeningsvejledning Omfattende vejledning til Intermatic T105 24-timers mekanisk tidsafbryder. Dækker modelspecifikationer, sikkerhedsadvarsler, ledningsføringsinstruktioner til forskellige konfigurationer (SPNO, SPNC, SPDT), programmeringsprocedurer og manuel betjening. Indeholder en detaljeret tabel over elektriske klassificeringer og anbefalinger til ledningstykkelse.
	Intermatic WHQ-seriens 40A vandvarmertimere med batteribackup - Installations- og betjeningsmanual Detaljeret information om Intermatic WHQ-seriens 24-timers/7-dages elektromekaniske vandvarmertimere, inklusive funktioner, specifikationer, installationsvejledning, programmeringsinstruktioner og garantioplysninger. Designet til bolig-, erhvervs- og industriel brug.
	Intermatic HB880R Udendørs 7-dages digital timer: Brugsanvisning og opsætningsvejledning Omfattende brugermanual til Intermatic HB880R udendørs 7-dages digital timer. Lær, hvordan du installerer, programmerer, indstiller tidsplaner og fejlfinder denne alsidige tidsafbryder.
	Installations- og betjeningsvejledning til Intermatic Spring Wound Interval Timer Detaljeret installations-, betjenings- og anvendelsesvejledning til Intermatic fjederviklede intervaltimere (FF- og FD-modeller). Indeholder kontaktklassificeringer, ledningsdiagrammer og garantioplysninger.
	Intermatic KM2-seriens vægindbygningstimer: Installations- og betjeningsvejledning Omfattende vejledning til installation og betjening af Intermatic KM2-serien af vægindbygningstimere. Lær om funktioner, specifikationer, programmering og ledningsføring til automatisk styring af belysning og andre kredsløb.
	Intermatic DT101 24-timers digital tidsafbryder: Installations- og betjeningsvejledning En omfattende vejledning til installation, programmering og betjening af Intermatic DT101 24-timers digital tidsafbryder. Dækker sikkerhedsforanstaltninger, produktspecifikationer, opsætning, programmering, driftstilstande og garantioplysninger.