1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of the TOPGREENER TSOS5-W In-Wall PIR Motion Sensor Light Switch. This device is designed to automatically control lighting, fans, and motors by detecting occupancy and vacancy in a room, offering both convenience and energy efficiency.
Læs venligst denne manual grundigt inden installation og brug for at sikre korrekt funktion og sikkerhed.
2. Sikkerhedsoplysninger
ADVARSEL: RISIKO FOR ELEKTRISK STØD.
Improper installation can result in serious injury or death. Always turn off power at the circuit breaker before beginning any electrical work. Consult a qualified electrician if you are unsure about any part of the installation process or if your wiring does not match the descriptions provided.
- This device requires a neutral wire for operation. Verify that a neutral wire is present in your electrical box before installation.
- This switch is for single-pole applications only. It is not compatible with 3-way or multi-way circuits.
- Do not exceed the maximum load ratings: 4 Amps, 500W.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Kun til indendørs brug.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- TOPGREENER TSOS5-W Motion Sensor Light Switch
- Trådmøtrikker
- Instruktionsmanual
- Vægplade
This image displays two TOPGREENER TSOS5-W in-wall PIR motion sensor light switches, each with a white wall plate. The switches feature a slider for OFF, AUTO, and ON modes, and a small dial for adjustments.
4. Specifikationer
| Modelnummer | TSOS5-W |
| Driftstilstand | Automatic, Off |
| Nuværende vurdering | 4 Amps |
| Operation Voltage | 120 volt |
| Kontakttype | Normalt åben |
| Connector Type | Skrueterminaler |
| Terminal | SPST (Single Pole Single Throw) |
| Kredsløbstype | 1-vejs |
| Aktuator type | Push Button / Slider |
| Produktmål (L x B x H) | 1.72 x 1.46 x 2.73 tommer |
| Max Sensor Coverage Area | 980 sq ft, 180° Field of View |
| Adjustable Range/Sensitivity | 30 % til 100 % |
| Variable Time Delay | 15 sec (test mode), 10 min, 20 min, 30 min |
| Certificeringer | UL-listet |
5. Installation
Før du begynder: Turn OFF power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.
- Sluk for strømmen: Find den afbryder, der styrer den kontakt, du udskifter, og sluk den. Kontroller, at strømmen er afbrudt med en lydstyrkemåler.tage tester.
- Fjern den gamle switch: Unscrew and carefully pull the old switch from the wall box. Disconnect the wires from the old switch.
- Identificér ledninger: You should have the following wires in your electrical box:
- Linjetråd (varm): Usually black, coming from the circuit breaker.
- Indlæs ledning: Usually black, going to the light fixture or appliance.
- Neutral ledning: Normalt hvid. This switch requires a neutral wire.
- Jordledning: Usually bare copper or green.
- Tilslut ny switch: Use the provided wire nuts to connect the wires from the wall box to the corresponding wires on the TOPGREENER TSOS5-W switch. Refer to the wiring diagram below.
- Tilslut Linje wire from the wall box to the Linje wire on the switch.
- Tilslut Indlæs wire from the wall box to the Indlæs wire on the switch.
- Tilslut Neutral wire from the wall box to the Neutral wire on the switch.
- Tilslut Jord wire from the wall box to the Jord wire on the switch.
- Monter afbryder: Carefully push the wired switch back into the wall box. Secure it with the mounting screws. Attach the wall plate.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
An internal diagram of the TOPGREENER motion sensor switch, highlighting its key components and features such as the precision PIR sensor, customizable controls, daylight detection, fault tolerance, and fire-resistant construction. This image also implies the wiring connections.
6. Betjening
The TOPGREENER TSOS5-W switch features a slider control with three main modes: OFF, AUTO, and ON.
- FRA -tilstand: When the slider is in the OFF position, the connected lights or appliance will remain off, regardless of motion detection. This acts as a manual override to keep the load off.
- AUTO Mode (Occupancy Sensor): When the slider is in the AUTO position, the switch functions as an occupancy sensor. It will automatically turn the lights/appliance ON when motion is detected and turn them OFF after a set time delay when no motion is detected.
- TIL-tilstand: When the slider is in the ON position, the connected lights or appliance will remain on continuously, regardless of motion detection. This acts as a manual override to keep the load on.
This image demonstrates the manual ON/OFF override feature of the TOPGREENER motion sensor switch, allowing users to switch between OFF, AUTO (sensor-controlled), and ON modes as needed.
The TOPGREENER motion sensor switch is shown in the 'OFF' position, indicating that the lights will remain off regardless of motion, suitable for situations where manual control is preferred.
7. Indstillinger og justeringer
The sensor switch includes three adjustable dials located behind the wall plate (or sometimes accessible via a small cover) to customize its behavior:
- Time Dial (Delay Time): This dial adjusts how long the lights/appliance remain ON after the last detected motion. Settings include 15 seconds (test mode), 10 minutes, 20 minutes, and 30 minutes. The 15-second test mode is useful for verifying detection and wiring during installation.
- Range Dial (Detection Sensitivity): This dial controls the sensor's detection coverage area and sensitivity. It can be adjusted from 30% to 100%. A higher setting provides broader coverage.
- Light Dial (Ambient Light Sensitivity): This dial sets the required ambient light level for the sensor to activate. Settings typically range from 1 to 4. Positions 1-2 are for darker locations, meaning the lights will turn on even if there is some ambient light. Positions 3-4 are for brighter locations, meaning the lights will only turn on when the room is quite dark.
This image highlights the adjustable dials on the TOPGREENER motion sensor switch: the Time Dial for setting the delay before reset, the Range Dial for detection sensitivity, and the Light Dial for ambient light activation levels.
En detaljeret view of the TOPGREENER motion sensor switch's adjustment knobs, illustrating the specific settings for time delay (15 seconds, 10, 20, 30 minutes), detection range (positions 1-4), and ambient light sensitivity (positions 1-4).
8. Fejlfinding
If you encounter issues with your TOPGREENER TSOS5-W motion sensor switch, refer to the following common problems and solutions:
- Lysene tænder ikke:
- Sørg for, at strømmen er tændt på afbryderen.
- Check all wiring connections for security and proper alignment (Line, Load, Neutral, Ground).
- Verify the switch is in AUTO or ON mode.
- Adjust the Range Dial to increase sensitivity.
- Adjust the Light Dial to a lower setting if the room is dark but the lights are not activating.
- Test the light bulb or fixture to ensure it is working correctly.
- Lights stay ON:
- Ensure the switch is in AUTO mode, not ON mode.
- Check for constant motion within the sensor's field of view.
- Adjust the Time Dial to a shorter delay.
- Adjust the Range Dial to decrease sensitivity if the sensor is detecting motion outside the desired area.
- Lights turn ON/OFF too frequently:
- Adjust the Time Dial to a longer delay.
- Adjust the Range Dial to decrease sensitivity.
- Ensure the sensor is not obstructed or exposed to drafts that might trigger it.
If the device does not work after installation or troubleshooting, please contact TOPGREENER customer support for assistance.
9. Vedligeholdelse
The TOPGREENER TSOS5-W motion sensor switch requires minimal maintenance.
- Rensning: To clean the switch and wall plate, gently wipe with a soft, damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen eller de indvendige komponenter.
- Inspektion: Periodically inspect the switch for any visible damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or contact a qualified electrician.
10. Garanti og support
TOPGREENER products are designed for reliability and performance. While specific warranty details are not provided in this manual, TOPGREENER typically offers a limited warranty on its products. Please refer to the product packaging or the official TOPGREENER webwebstedet for de seneste garantioplysninger.
For technical support, troubleshooting assistance, or warranty claims, please contact TOPGREENER customer service. Contact information can usually be found on the product packaging or the TOPGREENER official webwebsted.
