Columbia Lighting LLHV4-40M-WST-EDU LLHV VersaBay High Bay/LED brugsanvisning

1. Introduktion

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of the Columbia Lighting LLHV4-40M-WST-EDU LLHV VersaBay High Bay/LED fixture. Please read this manual thoroughly before installation and retain it for future reference.

The LLHV4-40M-WST-EDU is an LED linear high bay fixture designed for commercial and industrial applications. It features a 4-foot length, 4000K color temperature, medium lumen output (16313 lm), wide light distribution, and 0-10V dimming capabilities, operating on 120-277V.

2. Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen før installation eller service. Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle gældende nationale og lokale el-forskrifter.

• Sørg for, at forsyningen voltage is compatible with the fixture's requirements (120-277V).
• Do not handle live electrical components.
• Brug passende personlige værnemidler (PPE) under installationen.
• Dette produkt indeholder kemikalier, der af staten Californien vides at forårsage kræft og fødselsdefekter eller anden reproduktionsskade.
• Do not modify the fixture in any way not specified in this manual.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede ved udpakning:

• 1 x Columbia Lighting LLHV4-40M-WST-EDU LLHV VersaBay High Bay/LED Fixture
• Installation Hardware (may vary based on mounting accessories, sold separately)
• Instruktionsmanual (dette dokument)

Figure 1: Columbia Lighting LLHV4-40M-WST-EDU High Bay LED Fixture. This image shows the white linear LED high bay fixture with two rows of LED lights and a solid top housing.

4. Opsætning og installation

The LLHV4-40M-WST-EDU is designed for ceiling mounting. Specific mounting hardware and methods may vary based on the installation environment and local codes. Always consult a qualified electrician for installation.

4.1 Trin før installation

1. Strømafbrydelse: Ensure power to the installation area is completely disconnected at the circuit breaker before beginning any work.
2. Inspekter armatur: Carefully remove the fixture from its packaging and inspect for any shipping damage. Report any damage immediately.
3. Saml værktøjer: Prepare necessary tools, which may include screwdrivers, wire strippers, pliers, a drill, and appropriate mounting hardware.

4.2 Montering af armaturet

The fixture is designed for ceiling mounting. Refer to the specific mounting accessory instructions for detailed steps. Common methods include chain-hung or surface-mounted using appropriate brackets (not included).

1. Securely attach the chosen mounting hardware to the ceiling structure, ensuring it can support the fixture's weight (approximately 21.3 pounds).
2. Lift the fixture into position and attach it to the mounting hardware. Ensure it is stable and level.

4.3 Elektriske forbindelser

Al ledningsføring skal overholde nationale og lokale el-forskrifter.

1. Open the wiring compartment, typically located under the easy center driver cover.
2. Connect the supply wires to the fixture's wires:
   • Black (Line) to Black (Fixture)
   • White (Neutral) to White (Fixture)
   • Green or Bare Copper (Ground) to Green (Fixture)
3. For 0-10V dimming, connect the purple (dimming positive) and gray (dimming negative) wires from the fixture to the corresponding wires from the 0-10V dimmer control. Ensure proper polarity.
4. Fastgør alle forbindelser med passende ledningsforbindelser.
5. Carefully tuck all wires into the wiring compartment and close the cover.

4.4 Efterinstallation

Once installation is complete, restore power at the circuit breaker and test the fixture's operation and dimming functionality.

5. Betjeningsvejledning

The Columbia Lighting LLHV4-40M-WST-EDU fixture operates upon receiving power. If connected to a standard wall switch, simply toggle the switch to turn the light on or off.

5.1 Dæmpningsfunktionalitet

This fixture supports 0-10V dimming. If connected to a compatible 0-10V dimmer switch, adjust the dimmer control to achieve the desired light output level. Ensure the dimmer is rated for LED loads and compatible with 0-10V control protocols.

6. Vedligeholdelse

The LLHV4-40M-WST-EDU LED fixture is designed for long-term, low-maintenance operation. Regular cleaning and occasional inspection are recommended.

6.1 Rengøring

• Strømafbrydelse: Always disconnect power to the fixture before cleaning.
• Udvendig rengøring: Brug en blød, tør eller let damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or optical components.
• Optiske overflader: Gently clean optical surfaces with a lint-free cloth to maintain optimal light output.

6.2 Component Access

The easy center driver cover allows tool-less access to electrical components for modular replaceability. This should only be accessed by qualified personnel for servicing or component replacement.

7. Fejlfinding

Hvis armaturet ikke fungerer korrekt, skal du se følgende almindelige problemer og løsninger:

If troubleshooting steps do not resolve the issue, contact Columbia Lighting customer support or a qualified electrician.

8. Specifikationer

9. Garantioplysninger

The Columbia Lighting LLHV4-40M-WST-EDU fixture comes with a 5 års garanti. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, or to make a warranty claim, please refer to the official Columbia Lighting warranty documentation or contact customer support.

10. Support og kontakt

For technical assistance, replacement parts, or further inquiries, please contact Columbia Lighting customer support.

• Fabrikant: Hubbell Lighting, Inc.
• Webwebsted: www.hubbell.com/columbialighting
• Refer to the product packaging or the manufacturer's webhjemmeside for de seneste kontaktoplysninger.