1. Introduktion
This manual provides essential information for the safe and effective use of your MakerBot Replicator+ Desktop 3D Printer. The Replicator+ is designed for reliable 3D printing, featuring a Smart Extruder+, full-color LCD display, and various connectivity options. Please read this manual thoroughly before operating the device.
The MakerBot Replicator+ offers a 25% larger build volume and prints up to 30% faster than its predecessor. It incorporates improved hardware for enhanced reliability and precision.
2. Opsætning
2.1 Udpakning og placering
Carefully remove the printer from its packaging. Place the MakerBot Replicator+ on a stable, level surface with adequate space around it for ventilation and access. Ensure the area is free from excessive dust and direct sunlight.
2.2 Tilslutning af strøm og netværk
- Connect the provided power cable to the printer and a suitable power outlet.
- For network connectivity, you can use Wi-Fi, Ethernet, or a direct USB connection to your computer. Refer to the on-screen prompts for Wi-Fi setup or connect an Ethernet cable.
2.3 Installing the Smart Extruder+
The Smart Extruder+ is designed for easy installation. Align the extruder with its carriage on the printer and gently push it into place until it clicks. Ensure it is securely seated.
2.4 Indlæsning af filament
Load the MakerBot PLA filament spool onto the designated holder. Feed the filament into the extruder's intake port. The printer's LCD display will guide you through the filament loading process.
3. Betjeningsvejledning
3.1 Powering On and User Interface
Press the power button to turn on the printer. The full-color LCD display will show the printer's status and menu options. Navigate through the menus using the control knob.
3.2 Forberedelse af et udskriftsjob
Use the MakerBot Print software on your computer to prepare 3D models for printing. The software allows you to orient, scale, and slice your models, generating the necessary print files.
3.3 Initiating a Print
Once your model is prepared in MakerBot Print, send the print job to the Replicator+ via Wi-Fi, Ethernet, or USB. Confirm the print on the printer's LCD display to begin the process.
3.4 Monitoring and Print Removal
The on-board camera allows for remote monitoring of your print progress through the MakerBot Print software or mobile application. Once a print is complete, the flexible build plate can be removed from the printer. Gently flex the plate to detach the printed object.
4. Vedligeholdelse
4.1 Generel rengøring
Regularly wipe down the exterior of the printer with a soft, dry cloth. Keep the build chamber free of filament debris and dust.
4.2 Smart Extruder+ Care
Periodically inspect the Smart Extruder+ nozzle for any filament buildup or clogs. If a clog is suspected, follow the cleaning procedures outlined in the MakerBot support documentation. Avoid using sharp objects that could damage the nozzle.
4.3 Flexible Build Plate Maintenance
Clean the build plate surface with isopropyl alcohol to ensure optimal print adhesion. Inspect the grip surface for wear or damage. Replacement build plates are available if needed.
5. Fejlfinding
5.1 Problemer med trykadhæsion
- Ensure the build plate is clean and free of grease or debris.
- Verify that the first layer settings in the MakerBot Print software are appropriate for your filament and model.
- Confirm the build plate is properly seated and factory-leveled.
5.2 Problemer med udskriftskvaliteten
- Check that the correct filament type is selected in the software.
- Inspect the Smart Extruder+ for any signs of wear or damage.
- Ensure the filament is not tangled and feeds smoothly into the extruder.
5.3 Forbindelsesproblemer
- For Wi-Fi, verify the printer is connected to the correct network and has a strong signal.
- For Ethernet, ensure the cable is securely connected to both the printer and the network router.
- For USB, confirm the cable is properly connected and the necessary drivers are installed on your computer.
5.4 Fejlmeddelelser
If an error message appears on the LCD display, consult the MakerBot support webwebstedet eller kontakt kundeservice for specifik vejledning.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | MP07825EU |
| Fabrikant | MakerBot |
| Produktmål (D x B x H) | 17.4" x 20.8" x 16.2" (44.2 cm x 52.8 cm x 41.1 cm) |
| Varens vægt | 16 kilogram (35.27 pund) |
| Print Material Compatibility | PLA; MakerBot Tough PLA |
| Farve | Sort |
| Forbindelse | USB, Ethernet, Wi-Fi |
| Særlige funktioner | Swappable Smart Extruder+, Factory-Leveled Flex Build Plate, On-board Camera, Full-color LCD Display |
7. Garantioplysninger
The MakerBot Replicator+ 3D Printer is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official MakerBot website or the warranty documentation included with your purchase. The Smart Extruder+ specifically carries an extended warranty.
8. Support og ressourcer
For further assistance, technical support, or to access additional resources such as software updates and troubleshooting guides, please visit the official MakerBot support webwebsted:
Du kan også finde mere information og produkter på MakerBot Store on Amazon.
