Rode SVMPR

Rode Stereo VideoMic Pro Rycote brugsanvisning

Model: SVMPR

Indledning

The Rode Stereo VideoMic Pro Rycote is a high-quality stereo on-camera microphone designed for videographers. It is ideal for capturing music, atmospheric ambiance, and general audio for video production. Featuring matched half-inch condenser capsules in a coincident XY pair, it delivers a wide stereo image with natural depth. This manual provides comprehensive instructions for setting up, operating, and maintaining your microphone.

Nøglefunktioner

Close-up of the Rode Stereo VideoMic Pro without foam windshield, revealing the two condenser capsules in an XY configuration.

Figure 0: The matched half-inch condenser capsules of the Stereo VideoMic Pro.

Pakkens indhold

Please ensure all items are present before proceeding with setup.

Note: This microphone requires a 12V battery (not included) for operation. Please refer to the "Powering the Microphone" section for details.

Opsætning

1. Powering the Microphone

  1. Locate the battery compartment on the underside of the microphone.
  2. Open the compartment and insert a fresh 12V battery, observing the correct polarity.
  3. Luk batterirummet forsvarligt.

2. Attaching to a Camera or Boompole

The Stereo VideoMic Pro features an integrated camera shoe mount and a 3/8-inch thread for versatile mounting options.

Rode Stereo VideoMic Pro mounted on a camera, capturing audio from a musician playing guitar.

Figure 1: Rode Stereo VideoMic Pro mounted on a camera, ready for recording.

3. Tilslutning til din enhed

Connect the attached 3.5mm TRS output cable from the microphone to the microphone input jack on your camera or recording device. Ensure the connection is secure.

Betjeningsvejledning

The Stereo VideoMic Pro features intuitive controls on its rear panel for optimal audio capture.

Bag view of the Rode Stereo VideoMic Pro showing the power switch, high-pass filter, and level control switches.

Figure 2: Rear controls of the Rode Stereo VideoMic Pro.

1. Tænd/sluk

Slide the power switch (located on the left side of the rear panel) to the "ON" position to power on the microphone. The power indicator LED will illuminate green. Slide to "OFF" when not in use to conserve battery life.

2. High-Pass Filter (HPF)

The HPF switch (left switch on the rear panel) allows you to reduce unwanted low-frequency rumble from sources like traffic, air conditioning, or handling noise. Set it to the "80Hz" position to activate the filter, or "OFF" for a full-range response.

3. Niveaukontrol

The three-step level control switch (right switch on the rear panel) adjusts the microphone's output level:

4. Vindstøjreduktion

The included foam windshield helps to reduce light wind noise. For outdoor recording in windy conditions, it is highly recommended to use an additional furry windshield (e.g., Rode Dead Kitten, sold separately) for maximum wind protection.

Rode Stereo VideoMic Pro with foam windshield attached.

Figure 3: Rode Stereo VideoMic Pro with foam windshield.

5. Understanding Polar Pattern and Frequency Response

The Stereo VideoMic Pro utilizes a cardioid polar pattern in an XY configuration, providing a wide stereo image. The frequency response is optimized for clear audio capture across a broad range of sounds.

Polar pattern graph for the Rode Stereo VideoMic Pro, showing cardioid pickup.

Figure 4: Polar Pattern of the Stereo VideoMic Pro.

Frequency response graph for the Rode Stereo VideoMic Pro, showing a relatively flat response with a slight boost in higher frequencies.

Figure 5: Frequency Response of the Stereo VideoMic Pro.

6. Produktet er slutview Video

For a visual guide on the features and operation of the Rode Stereo VideoMic Pro Rycote, please watch the official product overview video below.

Video 1: Officielt produkt slutview of the Rode Stereo VideoMic Pro Rycote, detailing its features and benefits for videographers.

Opretholdelse

Fejlfinding

ProblemMulig årsagLøsning
Ingen lydudgangMicrophone not powered on; dead battery; incorrect cable connection; camera input settings.Ensure power switch is ON; replace 12V battery; check 3.5mm cable is fully inserted into both microphone and camera; verify camera's audio input settings are correct and input level is not muted or too low.
Forvrænget lydInput level too high (clipping); very loud sound source.Engage the -10dB pad on the microphone; reduce the input gain on your camera.
Excessive background noise/hissCamera's preamp noise; environmental low-frequency rumble; RF interference.Engage the +20dB boost on the microphone and lower your camera's input gain; activate the 80Hz high-pass filter; ensure wireless systems or Wi-Fi are not too close to the microphone or cable.
Wind noise in recordingsInsufficient wind protection.Ensure the foam windshield is properly fitted. For strong winds, use an additional furry windshield (e.g., Rode Dead Kitten).
Handling noise/vibrationsPhysical contact with camera/microphone during recording.The Rycote Lyre shock mount minimizes this, but avoid unnecessary contact with the camera or microphone during recording.

Specifikationer

FeatureDetalje
Audio Følsomhed38 dB
Varens vægt0.11 kilo (3.87 ounce)
Impedans200 Ohm
Mikrofon formfaktorHaglgevær
Varedimensioner (L x B x H)8 x 3 x 5 tommer
StrømkildeBatteridrevet
Antal påkrævede batterier1 x 12V batteri (medfølger ikke)
MaterialeFoam (windshield)
Signal-støjforhold73 dB
Hardware platformKamera
Antal kanaler2 (Stereo Output)
Frekvensområde40Hz - 20kHz
Støjniveau20 dB
ModelnavnSVMPR
ForbindelsesteknologiHjælpe
Connector Type3.5 mm Jack
Kompatible enhederKamera
FarveSort
Polar mønsterUnidirectional (Cardioid in XY configuration)

Garanti og support

Rode Microphones products are designed and manufactured to the highest quality standards. For detailed warranty information, product registration, and technical support, please visit the official Rode Microphones webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.

Officiel Webwebsted: www.rode.com

Relaterede dokumenter - SVMPR

Preview RODE NTH-100 Professional Over-Ear hovedtelefoner brugervejledning
Oplev de professionelle RODE NTH-100 over-ear hovedtelefoner, der er konstrueret til exceptionel lydgengivelse, overlegen komfort og holdbarhed for indholdsskabere. Lær om nøglefunktioner, design og specifikationer.
Preview Røde Wireless GO II hurtigstartguide
En hurtigstartguide til Rode Wireless GO II, der dækker oplysninger om opsætning, betjening og sikkerhed.
Preview RØDECaster Video: Alt-i-en produktionskonsol til video og lyd
Oplev RØDECaster Video, en revolutionerende alt-i-én-konsol til problemfri video- og lydproduktion, livestreaming og podcasting. Med avanceret switching, professionel lydmixning og kraftfuld processor.
Preview RØDE Stereo VideoMic Pro brugsanvisning - Opsætning, funktioner og specifikationer
Omfattende guide til RØDE Stereo VideoMic Pro-mikrofonen til kameraet, der dækker opsætning, betjeningselementer, funktioner, specifikationer, fejlfinding og vedligeholdelsesinstruktioner. Lær, hvordan du opnår lyd i broadcastkvalitet til dine videoer.
Preview Performance til virtuelt: Videoproduktionsguide til teater og dans
Lær essentielle værktøjer, tips og teknikker til at konvertere live teater- og danseforestillinger til video, herunder lyd, green screen, storyboarding og vigtigt udstyr fra Video Association of Dallas.
Preview ZGCINE ZG-R30 Opladningsetui til RODE Wireless Go - Brugermanual
Omfattende brugermanual til ZGCINE ZG-R30 opladningsetui, designet til RODE Wireless Go-mikrofoner. Lær om funktioner, specifikationer, betjening, sikkerhed, opbevaring, transport og garantioplysninger.