Dynojet Power Vision PV-2B CAN-Bus brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dynojet Power Vision PV-2B CAN-Bus device. The Power Vision is a performance tuning and diagnostic device for vehicles utilizing a CAN-Bus system, designed to optimize engine performance and provide real-time data monitoring.

Læs venligst denne manual grundigt, inden du bruger enheden, for at sikre korrekt funktion og forhindre skader.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger:

• Ensure the vehicle's ignition is off before connecting or disconnecting the Power Vision device.
• Do not attempt to modify the device or its internal components.
• Hold enheden væk fra ekstreme temperaturer, fugt og direkte sollys.
• Only use the provided cables and accessories with the Power Vision.
• Consult a qualified technician if you are unsure about any installation or tuning procedures.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Dynojet Power Vision Black PV-2B CAN-Bus Device
• Vehicle Connection Cable
• USB-kabel (til pc-forbindelse)
• Lynstartguide (se denne manual for yderligere oplysninger)

4. Produktet er slutview

Figure 4.1: Dynojet Power Vision PV-2B Device

The Dynojet Power Vision PV-2B is a compact, handheld device featuring a color touchscreen display. It includes a multi-pin connector cable for direct interface with your vehicle's diagnostic port. The screen displays various menu options such as "Program Vehicle" for flashing custom tunes, "Datalog" for recording vehicle data, "Vehicle Tools" for diagnostic functions, "Settings" for device configuration, "Device Info" for firmware details, and "Dealer Info". A USB port is also present for connecting to a computer for updates and file overførsler.

4.1 Enhedsfunktioner

• Flash tunes to your vehicle's ECU.
• Display real-time vehicle data (sensors, RPM, speed, etc.).
• Read and clear diagnostic trouble codes (DTCs).
• Perform diagnostic tests.
• Log data for analysis.
• Kompakt og holdbart design.

5. Opsætning

5.1 Indledende enhedsopsætning

1. Oplad enheden: Connect the Power Vision to a computer using the supplied USB cable. Allow the device to charge fully before first use.
2. Installer software: Download and install the latest WinPV software from the official Dynojet website onto your computer. This software is required for device updates and tune management.
3. Opdater firmware: Once WinPV is installed, connect the Power Vision to your computer. Follow the on-screen prompts in WinPV to update the device firmware to the latest version.

5.2 Tilslutning til køretøj

1. Locate your vehicle's diagnostic port (typically a 4-pin or 6-pin connector for motorcycles, or an OBD-II port for other vehicles). Refer to your vehicle's service manual for exact location.
2. Sørg for, at køretøjets tænding er i OFF-positionen.
3. Connect the Power Vision vehicle cable to the diagnostic port. Ensure a secure connection.
4. Connect the other end of the vehicle cable to the Power Vision device.
5. Turn the vehicle's ignition to the ON position (do not start the engine unless instructed by a specific procedure). The Power Vision device should power on automatically.

6. Betjeningsvejledning

6.1 Navigering i menuen

The Power Vision features a touchscreen interface. Tap on the desired icon to select a function.

• Program køretøj: Used to flash custom tunes or restore stock tunes to your vehicle's ECU.
• Datalog: Initiates data logging sessions to record various vehicle parameters.
• Køretøjsværktøj: Access diagnostic functions such as reading/clearing DTCs, performing system tests, and viewlive-data.
• Indstillinger: Configure device preferences, display options, and unit measurements.
• Enhedsoplysninger: Displays device serial number, firmware version, and other internal information.
• Forhandlerinformation: Provides contact information for your Dynojet dealer (if configured).

6.2 Flashing a Tune

1. Ensure the device is connected to the vehicle and the ignition is ON.
2. Fra hovedmenuen skal du vælge "Program Vehicle".
3. Follow the on-screen prompts to select the desired tune file.
4. Confirm the tune selection and initiate the flashing process. IMPORTANT: Do not interrupt the flashing process. Ensure the vehicle battery is fully charged.
5. Once complete, the device will indicate success. Turn the ignition OFF, then ON again to reset the ECU.

6.3 Datalogning

1. Fra hovedmenuen skal du vælge "Datalog".
2. Choose the parameters you wish to log.
3. Start the logging session. The device will record data until stopped.
4. To retrieve logged data, connect the Power Vision to your computer and use the WinPV software.

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to clean the device screen and casing. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the Power Vision in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Firmwareopdateringer: Regularly check the Dynojet website for firmware updates to ensure optimal performance and compatibility with new vehicle models.
• Kabelinspektion: Periodically inspect the connection cables for any signs of wear or damage. Replace if necessary.

8. Fejlfinding

9. Specifikationer

10. Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Dynojet Research directly.

• Webwebsted: www.dynojet.com
• Refer to the official Dynojet webwebstedet for de seneste kontaktoplysninger og supportressourcer.