OSRAM Night Breaker Laser H7 halogenforlygtepærer brugsanvisning

1. Introduktion

Thank you for choosing OSRAM Night Breaker Laser H7 Halogen Headlight Bulbs. These high-performance bulbs are engineered to provide significantly brighter light, a longer beam, and a whiter light color compared to standard halogen bulbs, enhancing visibility and safety during night driving. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new headlight bulbs.

Figure 1: Packaging for OSRAM Night Breaker Laser H7 Halogen Headlight Bulbs.

2. Sikkerhedsoplysninger

Please read and understand all safety warnings before handling or installing the bulbs. Failure to follow these instructions may result in personal injury or damage to your vehicle.

• Elektrisk fare: Always disconnect the vehicle's battery before attempting any electrical work to prevent electric shock.
• Varme overflader: Headlight bulbs become extremely hot during operation. Allow the headlight assembly to cool completely before handling.
• Øjenbeskyttelse: Wear appropriate eye protection when working on your vehicle.
• Håndteres med forsigtighed: Avoid touching the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use clean gloves or a lint-free cloth.
• Professionel installation: Hvis du er usikker på installationsprocessen, anbefales det at søge hjælp hos en kvalificeret biltekniker.

3. Opsætning og installation

3.1 Før installation

• Bekræft pæretype: Ensure your vehicle uses H7 type halogen bulbs for its headlights. Consult your vehicle's owner's manual.
• Saml værktøjer: You may need a screwdriver, pliers, and clean gloves.
• Køretøjsforberedelse: Park your vehicle on a level surface, turn off the engine, engage the parking brake, and allow the headlights to cool down. Disconnect the negative terminal of the vehicle's battery.

3.2 Installationstrin

1. Locate Headlight Assembly: Open the hood and locate the back of the headlight assembly. Access may vary by vehicle model; some require removing the entire headlight unit.
2. Afbryd strømmen: Carefully disconnect the electrical connector from the back of the existing H7 bulb.
3. Fjern gammel pære: Release the retaining clip or twist the bulb holder to remove the old H7 bulb from its housing.
4. Installer ny pære: Holding the new OSRAM Night Breaker Laser H7 bulb by its base (using gloves), insert it into the headlight housing. Ensure it is seated correctly and securely.
5. Sikker pære: Re-engage the retaining clip or twist the bulb holder to lock the new bulb in place.
6. Tilslut strøm igen: Sæt det elektriske stik i den nye pære igen.
7. Test funktionalitet: Reconnect the vehicle's battery, turn on the headlights, and verify that both new bulbs are functioning correctly. Check both low and high beams.

Figure 2: An OSRAM Night Breaker Laser H7 bulb, showing its base and filament structure.

4. Betjeningsvejledning

Once installed, your OSRAM Night Breaker Laser H7 bulbs operate like standard halogen headlights. They are designed to provide enhanced performance for improved visibility.

• Brighter Light: Experience up to 130% more brightness on the road compared to minimum legal standards.
• Longer Beam: The light beam can extend up to 40 meters further, allowing for earlier detection of obstacles and hazards.
• Whiter Light: Enjoy up to 20% whiter light, which is closer to daylight, reducing eye strain and improving contrast.

Figure 3: An OSRAM Night Breaker Laser H7 bulb in operation, emitting bright light.

Figure 4: Chart illustrating the increased brightness, distance, and light color of Night Breaker Laser bulbs compared to standard bulbs.

Figure 5: Visual comparison of the light beam on a dark road, highlighting the improved illumination provided by Night Breaker Laser bulbs.

5. Vedligeholdelse

OSRAM Night Breaker Laser H7 bulbs require minimal maintenance. Proper care can help ensure their longevity and optimal performance.

• Hold linserne rene: Regularly clean your vehicle's headlight lenses to ensure maximum light output. Dirt and grime can significantly reduce visibility.
• Undgå at røre ved glas: As mentioned in the safety section, avoid touching the glass envelope of the bulb. If accidentally touched, clean it with an alcohol wipe and a lint-free cloth before installation or operation.
• Regelmæssig inspektion: Periodically check your headlights to ensure both bulbs are working and emitting light evenly.

6. Fejlfinding

If you encounter issues with your OSRAM Night Breaker Laser H7 bulbs, consider the following troubleshooting steps:

• Pære lyser ikke:
  • Check the electrical connection to the bulb; ensure it is secure.
  • Undersøg bilens sikringsboks for en sprunget forlygtesikring.
  • Test the bulb in another working headlight socket if possible, or test the socket with a known working bulb.
• Dæmpet lysudgang:
  • Sørg for det korrekte wattage bulb (55W) is installed.
  • Check for dirty or hazy headlight lenses that may be obstructing light.
  • Verify the vehicle's charging system is providing adequate voltage.
• Flimrende pære:
  • Inspect electrical connections for looseness or corrosion.
  • Tjek for voltagudsving i køretøjets elektriske system.

If these steps do not resolve the issue, consult a professional automotive technician.

7. Specifikationer

Figur 6: Bagside view of the product packaging, displaying detailed specifications and certifications.

8. Garanti og support

For detailed warranty information and customer support, please refer to the official OSRAM webwebstedet eller kontakt deres kundeservice direkte. Garantivilkår og -betingelser kan variere afhængigt af region og forhandler.

Du kan finde flere oplysninger og supportressourcer ved at besøge OSRAM-butik på Amazon.