Vigtige sikkerhedsforanstaltninger
Ved brug af elektriske apparater skal grundlæggende sikkerhedsforanstaltninger altid følges, herunder følgende:
- Læs alle instruktioner før brug.
- Rør ikke ved varme overflader. Brug håndtag eller knopper.
- For at beskytte mod elektrisk stød må ledning, stik eller apparat ikke nedsænkes i vand eller anden væske.
- Tæt opsyn er nødvendigt, når et apparat bruges af eller i nærheden af børn.
- Træk stikket ud af stikkontakten, når det ikke er i brug, og før rengøring. Lad det køle af, før du sætter dele på eller af.
- Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde. Returner apparatet til det nærmeste autoriserede serviceværksted for undersøgelse, reparation eller justering.
- Brug af tilbehør, der ikke er anbefalet af apparatets producent, kan forårsage skader.
- Må ikke bruges udendørs.
- Lad ikke ledningen hænge ud over kanten af bordet eller bordpladen eller røre ved varme overflader.
- Må ikke placeres på eller i nærheden af en varm gas- eller elektrisk brænder eller i en opvarmet ovn.
- Der skal udvises ekstrem forsigtighed ved flytning af et apparat, der indeholder varm olie eller andre varme væsker.
- Sæt altid stikket i apparatet først, og sæt derefter ledningen i stikkontakten. For at afbryde forbindelsen skal du slukke for en vilkårlig knap og derefter tage stikket ud af stikkontakten.
- Brug ikke apparatet til andet end tilsigtet brug.
- Dette apparat har et polariseret stik (det ene blad er bredere end det andet). For at reducere risikoen for elektrisk stød passer dette stik kun i en polariseret stikkontakt på én måde. Hvis stikket ikke passer helt i stikkontakten, skal du vende stikket om. Hvis det stadig ikke passer, skal du kontakte en kvalificeret elektriker. Modificer ikke stikket på nogen måde.
- Sørg for, at enheden er placeret på en stabil, plan overflade.
- Bloker ikke ventilationsåbninger.
- Brug kun induktionsegnet køkkengrej.
Produkt overview
The Avantco IC3500 is a high-power countertop induction range designed for commercial use. It features a durable ceramic glass surface and precise temperature control for efficient cooking.
Figur 1: Forside view of the Avantco IC3500 Countertop Induction Range. This image shows the sleek ceramic glass cooking surface, the red control panel with a digital display, and clearly labeled buttons for timer, temperature/heating, and power (ON/OFF).
Figur 2: Side og bagside view of the Avantco IC3500 Countertop Induction Range. This perspective highlights the robust stainless steel casing, the ventilation grilles on the side for heat dissipation, and the power cord extending from the rear of the unit.
Specifikationer
| Feature | Detalje |
|---|---|
| Model | IC3500 |
| Voltage | 208/240V |
| Wattage | 3500W |
| Materiale | Ceramic Glass (cooking surface), Stainless Steel (body) |
| Kontrolelementer | Knob with Digital Control Panel |
| Varmeelementer | 1 |
| Strømkilde | Induktion |
| UPC | 703168628719 |
Opsætning og installation
- Udpakning: Carefully remove the induction range from its packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
- Placering: Place the unit on a stable, level, heat-resistant surface. Ensure there is adequate ventilation around the unit. Do not place it directly against a wall or in an enclosed space. Maintain at least 4 inches of clearance on all sides.
- Strømtilslutning: Ensure the electrical supply matches the specifications of the unit (208/240V, 3500W). Plug the unit into a dedicated, grounded electrical outlet. Do not use extension cords or multi-outlet adapters.
- Indledende rengøring: Before first use, wipe down the ceramic glass surface and the stainless steel body with a damp klæde. Brug ikke slibende rengøringsmidler.
Betjeningsvejledning
Kompatibelt køkkengrej
The Avantco IC3500 requires induction-compatible cookware. Look for cookware with a flat bottom and made of magnetic materials such as cast iron, magnetic stainless steel, or enameled steel. Cookware with a diameter between 4.7 inches (12 cm) and 10.2 inches (26 cm) is recommended for optimal performance.
Grundlæggende betjening
- Tænd: Place induction-compatible cookware with contents on the center of the ceramic glass surface. Press the ON/OFF button to turn the unit on. The display will illuminate.
- Vælg tilstand: The unit typically defaults to a power level setting. Use the TEMP/HEATING button to toggle between temperature mode and power (heating) mode.
- Juster indstillinger: Brug pileknapper (▼ og ▲) to adjust the power level or temperature. Power levels typically range from 1 to 10, and temperature settings from 140°F to 460°F (60°C to 238°C).
- Indstil timer (valgfrit): Tryk på TIMER knap. Brug pileknapper to set the desired cooking time. The timer can be set for up to 180 minutes. Once the timer expires, the unit will automatically shut off.
- Sluk: Tryk på ON/OFF button to turn the unit off when cooking is complete. The fan may continue to run for a short period to cool the unit.
Fejlkoder
If an error code appears on the display, refer to the following table:
| Kode | Beskrivelse | Løsning |
|---|---|---|
| E0 | No cookware detected or incompatible cookware. | Place induction-compatible cookware on the unit. Ensure cookware is centered. |
| E1 | Indvendig temperatur for høj. | Allow unit to cool down. Ensure ventilation openings are not blocked. |
| E2 | Cookware temperature too high. | Remove cookware and allow it to cool. Reduce cooking temperature/power. |
| E3 | Voltage for lavt. | Check power supply. Ensure unit is connected to a stable 208/240V outlet. |
| E4 | Voltage for højt. | Check power supply. Ensure unit is connected to a stable 208/240V outlet. |
| E5 | Internal circuit malfunction. | Unplug the unit, wait 5 minutes, then plug back in. If error persists, contact service. |
Rengøring og vedligeholdelse
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Avantco IC3500 induction range.
- Tag altid stikket ud: Før rengøring skal du altid tage stikket ud af stikkontakten og lade enheden køle helt af.
- Keramisk glasoverflade: Tør den keramiske glasoverflade af med adamp cloth and mild detergent. For stubborn stains, use a non-abrasive ceramic cooktop cleaner. Do not use abrasive pads, scouring powders, or harsh chemicals.
- Rustfrit stålhus: Clean the stainless steel exterior with a damp cloth and mild soap. Dry thoroughly with a soft cloth to prevent water spots.
- Ventilationsåbninger: Periodically check and clean the ventilation openings to ensure they are free from dust and debris. Use a soft brush or vacuum cleaner to remove any blockages.
- Fordyb ikke: Nedsænk aldrig enheden i vand eller anden væske.
- Opbevaring: Opbevar enheden et tørt og rent sted, når den ikke er i brug.
Fejlfinding
If you encounter issues with your Avantco IC3500, refer to the following common troubleshooting steps before contacting service.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | No power supply; Unit not plugged in; Circuit breaker tripped. | Check power cord connection. Ensure outlet has power. Reset circuit breaker if tripped. |
| Køkkengrej varmes ikke op. | Incompatible cookware; Cookware not centered; Cookware too small/large. | Use induction-compatible cookware. Center cookware on the cooking zone. Ensure cookware diameter is within recommended range (4.7" - 10.2"). |
| Enheden slukker uventet. | Overheating (E1/E2 error); Timer expired; Power fluctuation. | Allow unit to cool. Check for blocked ventilation. Reset timer if applicable. Check power supply stability. |
| Fan runs continuously after unit is off. | Normal afkølingsproces. | This is normal. The fan will stop once the internal components have cooled sufficiently. |
| Display shows an error code (e.g., E0, E1, E2, E3, E4, E5). | Specific malfunction indicated by the code. | Refer to the "Error Codes" section in Operating Instructions for specific solutions. |
Garanti og support
Avantco products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Avantco webwebsted.
For technical support, service, or parts inquiries, please contact Avantco customer service. Have your model number (IC3500) and serial number ready when contacting support.
Avantco Customer Service:
- Contact information typically found on the manufacturer's webwebsted eller produktdokumentation.
- Online ressourcer og ofte stillede spørgsmål kan også være tilgængelige.
